Owner's Manual

E-14
(PMT-L31)
(PMT-H35)
10˚ 10˚
ADJUSTING THE PROJECTION ANGLE
Before adjustment
• Turn the projector on and project an image, following the instructions on the owner’s manual of the
projector.
• Set the appropriate projection method on “Installation” item in “Set up” menu. For the detail about the
setting, refer to the owner’s manual of the projector.
• First, select a projection size using the zoom feature, and then adjust the angle.
1 Adjust the horizontal angle.
Adjust the projector so that the projected image is centered horizontally on the screen, and then tighten the
horizontal angle adjustment screws (2 on the PMT-L31, 4 on the PMT-H35).
Maximum angle of
adjustment: ±10˚
Horizontal angle adjustment screws
Left
Right
12PMT_BODY_E 2002.10.08, 15:1414