Specifications

15 Appendix
POCKETRAK C24 Reference Manual
81
FAQ
Q: Why do I hear a rustling noise in the recordings?
A: A rustling noise may be recorded if you move the unit during recording, or even if you move
your fingers while holding the unit when recording. If possible, try not to move the unit
during recording.
Q: How can I transfer the recordings onto tapes or MDs?
A: Use a standard audio cable (with 3.5mm mini plugs) to connect the unit to your tape
recorder or MD recorder, then dub the recordings to a tape or MD.
Compatible audio cable
* Use a stereo audio cable.
* Before dubbing the recordings, adjust the dubbing level on the unit.
* You can also dub the recordings from your tape player or MD player to the unit (see
page 11).
Q: Are there any tips to making a good recording?
A: Try a test recording to set the optimum recording mode and sensitivity, since the recording
condition varies with the location and circumstances.
Q: I cannot play a recorded file that was stored on the computer and transferred back to
the unit.
A: You may have changed the file name on the computer. If you change the file name, the file
will not play, even if it is transferred back into the MIC(A–D) or LINE folder. However, you will
be able to play the file if you transfer it into the MUSIC folder.
Socket on the external recorder Audio cable
Microphone input 3.5-mm mini plug, with resistance
Line input 3.5-mm mini plug, without resistance
Stereo
headphone
socket
Microphone/
Line input
socket
External recorder
Standard audio cable