Specifications

3 Recording Settings
POCKETRAK W24 Reference Manual
17
Turning the ALC (Auto Level Control) on and off
Note:
· You can turn the ALC function on or off when recording audio to folders A–D.
• Turning the ALC function on
Slide the [ALC] switch located on the side panel of the
unit to “ON.”
The recording level will automatically be adjusted in
response to the input level.
• Turning the ALC function off
Slide the [ALC] switch (located on the side panel of the
unit) to “OFF.”
You can change the recording level in increments (Refer
to the Owner’s Manual).
Note:
· You cannot adjust the recording level when you are recording audio from a connected
external device (see page 10).
Setting the microphone sensitivity (MIC SENS)
You can set the microphone sensitivity level to high or low to accommodate the recording
environment.
• If the volume level of the recording source is too low:
Slide the [MIC SENS] switch (located on the side panel) to [HIGH].
• If the volume level of the recording source is too high:
Slide the [MIC SENS] switch (located on the side panel) to [LOW].
The indicator displayed in the upper right of the LCD:
When the [MIC SENS] switch is set to [HIGH]:
When the [MIC SENS] switch is set to [LOW]:
7/7
AUTO
44.1KPCM
A
16bit
L
0:0 3
091101_1746.WAV
0:00:00
L
R
ALC ON
7/7
44.1KPCM
A
16bit
L
40
0:0 3
091101_1746.WAV
0:00:00
L
R
ALC OFF
(The recording level
will be displayed.)
H
L