Specifications

3 Recording Settings
POCKETRAK W24 Reference Manual
19
Selecting a recording EQ option
1. Set the [ALC] switch to “OFF.”
2. Press the [FOLDER/A-B REPEAT] button  the [VOL +/–], [ ]/[ ] buttons to
select a folder into which to record, then press the [MENU/ENTER] button.
Select a folder from folders A–D.
3. Press the [REC/PAUSE ] button.
The unit displays the [STANDBY] indicator.
4. Press and hold down the [MENU/ENTER] button for at least two (2) seconds while
the [STANDBY] indicator is displayed.
The unit displays the REC MENU screen.
5. Press the [VOL +/–] buttons to select [RECORDING EQ], then
press the [MENU/ENTER] button.
The unit displays the recording EQ screen.
6. Press the [ ]/[ ] buttons to select the desired recording EQ option.
You can select from eight recording EQ presets and one USER recording EQ (which
enables you to customize the EQ settings).
Hint:
· For information on how to customize the USER recording EQ option, refer to
“Customizing the recording EQ” on page 20.
7. Press the [MENU/ENTER] button.
The selection of the recording EQ is confirmed. Press the [STOP/ESC ] button to
display the [STANDBY] indicator. Adjust the recording level, then press the [REC/PAUSE
] button again to start recording.
Note:
· To cancel the operation, press the [STOP/ESC ] button.
–30dB
3:0 2
091101
_
1712.WAV
STANDBY
0:00:00
20
44.1KPCM
A
16bit
L
L
R
REC MENU
HPF
PEAK HOLD
RECORDING EQ
20