Specifications

3 Recording Settings
POCKETRAK W24 Reference Manual
21
Setting the recording peak limiter
When the recording peak limiter is set to ON, the recorder reduces sound distortion by
automatically adjusting excessive peaks. It is recommended that you set the limiter to ON when
you are recording audio. The peak limiter is available only when the ALC is set to OFF.
Procedure:
Press the [MENU/ENTER] button for at least two (2) seconds while the
main screen is displayed, select [REC MENU]  [REC LIMITER]  [ON],
then press the [MENU/ENTER] button.
To cancel the recording peak limiter, select [OFF].
Setting the High Pass Filter (HPF)
You can cut the low frequency range by switching the High Pass Filter on. The filter reduces the
level of chatting voices, wind and other noise in the recording environment and enables you to
record clearer audio.
Procedure:
Press the [MENU/ENTER] button for at least two (2) seconds while the
main screen is displayed, select [REC MENU]  [HPF (High Pass Filter)]
 [ON], then press the [MENU/ENTER] button.
The indicator will appear on the main screen.
To cancel the High Pass Filter, select [OFF].
Setting the recording peak hold indication
You can set the duration of the recording peak hold indication displayed on the LCD. This setting
is useful when you want to record live with the recording level set to maximum.
Procedure:
1. Press and hold down the [MENU/ENTER] button for at least two
(2) seconds while the main screen is displayed, select [REC
MENU]  [PEAK HOLD], then press the [MENU/ENTER] button.
2. Press the [VOL +/–] buttons to set the peak hold time to [INF]
(infinity) or a value from 0 to 10 seconds, then press the [MENU/
ENTER] button.
3. Press the [STOP/ESC ] button twice.
The unit displays the main screen.
REC LIMITER
40
OFF
ON
*
DISABLED WHEN
ALC IS ON
HPF
40
OFF
ON
HPF
High Pass Filter
REC MENU
REC MODE
HPF
REC LIMITER
PEAK HOLD
REC SELECT
40
PEAK HOLD
40
3 sec