Specifications

5 Playback Settings
POCKETRAK W24 Reference Manual
31
Using the A-B Repeat playback function
During playback, you can specify a part of a file that you want to play repeatedly (from
point A to point B).
1. During playback, press the [FOLDER/A-B REPEAT] button
at the desired start point (A) for A-B Repeat playback.
The start point indicator lights up.
2. Press the [FOLDER/A-B REPEAT] button at the desired
end point (B) for A-B Repeat playback.
The end point is set, and the unit starts playing back the
part between A and B repeatedly until you cancel the A-B
Repeat function.
To cancel A-B Repeat playback, do one of the following
operations during A-B Repeat playback:
• Press the [FOLDER/A-B REPEAT] button again.
• Press the [STOP/ESC ] button.
• Press the [ ]/[ ] buttons.
Note:
· If the duration between point A and B is too short, you will be unable to set up A-B
Repeat playback.
· If you set point A, but not point B, the end of the file will automatically become point B.
· The unit will not perform A-B Repeat playback across files.
Using the Phrase playback function
You can move back the playback point in the currently-playing file by a specified number of
seconds. This function is useful if you want to listen again to a short phrase in a piece of
music or an important piece of audio.
1. During playback, press the [SCENE/PHRASE] button.
The playback point will move back by the specified number of seconds and playback
will resume.
Note:
· During A-B Repeat playback, the Phrase playback function remains effective between
points A and B.
· If the specified number of seconds exceeds the time between the current playback point
and the beginning of the file, the unit will play back from the beginning of the file.
· The playback point can be moved back to the beginning of the file, but no further. It
cannot jump into the previous file.
0:5 0
091101
_
0025.WAV
0:00:12
44.1K
16bit
L
R
4/9
A
A
PCM
Start point indicator
0:5 2
091101
_
0025.WAV
0:00:10
44.1K
16bit
L
R
4/9
A
AB
PCM
A-B Repeat indicator