Owner`s manual

Adjusting the playback speed
Owner’s Manual
19
Adjusting the playback speed
You can decrease or increase the playback
speed, if necessary.
1. Press the [MENU] button.
2. Use the [+] and [–] but-
tons to select “SPD”,
then press the [ ]
(Play) button.
3. Use the [+] and [–] buttons to select
the desired playback speed (expressed
as a percentage), then press the [ ]
(Play) button.
Setting range: 50%–200%
4. After the setting process is
complete, press the [■] (Stop)
button.
The PR7 calls up the HOME screen.
NOTE
• Pressing the [MENU] button during playback
enables you to change only the playback speed.
• PCM: With files recorded at sampling rates of
96kHz/88.2kHz, you can set the playback speed
in the range of 50% to 150%.
Tuner
You can use the tuner to tune your musical
instrument.
1. Press the [MENU] button.
2. Use the [+] and [–] but-
tons to select “TUN”,
then press the [ ]
(Play) button.
3. Use the [+] and [–] buttons to specify
the standard pitch (A=), then press the
[ ] (Play) button.
Setting range: 430–450Hz
4. Play and tune the musical instrument.
5. After tuning is complete,
press the [■] (Stop) button.
The PR7 calls up the HOME
screen.
 Align with the
center segment.
 Key