Owner`s manual

File naming rules for dividing, deleting or moving a file
Owner’s Manual
24
File naming rules for divid-
ing, deleting or moving a file
• If file R0/01 is divided, the resultant files will
be named (numbered) R0/01 and R0/02. The
number of existing subsequent files will
increase by one (1); for example, file number
“R0/02” will become “R0/03.”
• If file R0/01 is deleted, the number of each
subsequent file (that exists in the R0 folder)
will decrease by one (1); for example, file
number “R0/02” will become “R0/01.”
• If file R0/01 is copied, the copy will be
assigned the lowest available file number in
the copy destination folder (R0).
• If file R0/01 is moved into the R1 folder:
1) The number of each subsequent file (that
exists in the R0 folder) will decrease by one
(1); for example, file number “R0/02” will
become “R0/01.”
2) The file that you moved will be assigned
the lowest available file number in the des-
tination folder (R1).
Connecting the PR7 to a
computer
1. Use the supplied USB cable to connect
the PR7 to your computer.
2. After the PR7 is recognized as a USB
storage device on the computer, dou-
ble-click “PR7” (built-in memory) or
“PR7SD” (microSD card) to open.
3. To disconnect the PR7 from the com-
puter, follow the steps to disconnect a
USB storage device.
R0/01 R0/02 R0/03
R0/03 R0/04
R0/01 R0/02
R0/01 R0/02 R0/03
R0/01 R0/02
R0/01
R0/01 R0/02 R0/03 R0/04
R0/02 R0/03
R0/xx
Built-in
memory
microSD
R0/01
R1/01 R1/02 R1/03 R1/04
R0/02 R0/03
R0/01 R0/02
R1/xx
Folder R0
Folder R0
Folder R1
Windows
Mac
microSD card
Built-in memory