SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).
IMPORTANT SAFETY INSTRUCTIONS INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK, AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST. WARNING- When using any electrical or electronic product, basic precautions should always be followed. These precautions include, but are not limited to, the following: 8. This product was NOT designed for use in wet/damp locations and should not be used near water or exposed to rain.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep these precautions in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: • This instrument contains no user-serviceable parts. Do not attempt to disassemble or modify the internal components in any way.
Using the Floppy Disk Drive (FDD) and Floppy Disks ■ Inserting/Ejecting Floppy Disks ● Never attempt to remove the disk or turn the power off during recording, reading and playing back. Doing so can damage the disk and possibly the disk drive. ● Be sure to remove the floppy disk from the disk drive before turning off the power. A floppy disk left in the drive for extended periods can easily pick up dust and dirt that can cause data read and write errors.
Congratulations! You are the proud owner of an extraordinary electronic keyboard. The Yamaha 9000Pro combines advanced tone generation technology with state-of-the-art digital electronics and features to give you stunning sound quality with maximum musical versatility. The advanced Auto Accompaniment, Vocal Harmony, and Sampler features, in particular, are brilliant examples of how Yamaha technology can significantly expand your musical horizons.
How to use the manual Starting Up........................................................................................................................page 14 Before going on to any other part of the manual, we strongly suggest you read this section first. It shows you how to get started playing and using your new 9000Pro. Top Panel & Connections................................................................................................page 10 Rear Panel & Connections ................................
Contents Packing List..................................................6 Panel logos ..................................................6 How to use the manual ................................7 Contents ......................................................... 8 Top Panel & Connections............................ 10 Music stand................................................10 Rear Panel & Connections .......................... 12 Starting Up ................................................... 14 Lamp ....
Contents Creating Plug-in Custom Voices............... 100 MIDI Functions ........................................... 168 Voice Editing ....................................................102 Native System Parameter Editing ....................105 Voice Editing on a Computer............................106 Board Custom Voice Backup............................108 System Settings .............................................. 175 Transmit Settings.............................................
Top Panel & Connections PHONES jack... page 13 Music stand The 9000Pro is supplied with a music stand that can be attached to the instrument by inserting it into the holes as shown. !0 INPUT VOLUME control t y u w e q w e r t y i o !1 r Floppy Disk Drive... page 25, 30, 150 Keyboard... page 162 The 9000Pro also features a built-in disk drive that lets you save all your important original data to floppy disk for future recall.
Top Panel & Connections Air vent Do not place objects on the instrument’s air vent, since this may prevent adequate ventilation of the internal components, and possibly result in the instrument overheating. q !3 @0 !4 !5 !9 @4 !6 !2 !7 @1 @2 @3 !8 Liquid Crystal Display (LCD) and Related Buttons/Controls ... page 44 Large multi-function LCD display panel with display-based buttons, plus comprehensive display prompts and messages, makes operation easy and intuitive.
Rear Panel & Connections CAUTION • Make sure that the POWER switch is in the OFF (extended) position before making any connections. If you make connections while the POWER switch is on, you risk damaging external equipment such as the amp or speakers. An optional lamp can be connected to the 9000Pro. This is especially convenient when using the 9000Pro in situations of low available light. See page 15 for details.
Rear Panel & Connections PHONES jack A standard pair of stereo headphones can be plugged in here for private practice or late-night playing. Use the [MASTER VOLUME] control to adjust the volume of the headphone sound. MIC/LINE IN jack The 9000Pro includes a microphone/line input jack which is compatible with virtually any standard microphone or line-level source, accepting either 1/4” phone plugs or XLR connectors. The microphone or line input can be used with the 9000Pro’s vocal harmony function.
Starting Up Use the following procedure to start up the 9000Pro. WARNING 1 Make sure that the POWER switch is in the OFF position. 2 Securely plug the “female” end of the • Make sure your 9000Pro is rated for the AC voltage supplied in the area in which it is to be used (as listed on the rear panel). Connecting the unit to the wrong AC supply can cause serious damage to the internal circuitry and may even pose a shock hazard! • Use only the AC power cord supplied with the 9000Pro.
Starting Up Lamp The 9000Pro features two Lamp terminals (at either end of the rear panel) for connecting an optional lamp. This is especially convenient when using the 9000Pro in situations of low available light. To turn on the lamp, use the switch/dimmer control at the left end of the rear panel (as viewed from the keyboard side). Either or both terminals can be used, letting you connect up to two lamps.
Playing Voices Reference on page 57 Voice related buttons Playing a Voice Quick Guide 1 Press the [R1] LCD button to turn the RIGHT1 part on. • The voice selected here is called voice RIGHT 1. See page 57 for more information on voice RIGHT1. F G H PART SELECT I LEFT HOLD LEFT RIGHT1 RIGHT2 RIGHT3 J LOWER PART ON/OFF UPPER 2 Select a voice group. For this example, STRINGS is selected. 3 Select a voice. A B C For this example, Live! Orch is selected.
Playing Voices Playing Two or Three Voices Simultaneously 1 Press the PART ON/OFF [RIGHT2] button to turn the RIGHT2 part ON. Automatically turned on PART SELECT LEFT HOLD LEFT LOWER RIGHT1 PART ON/OFF RIGHT2 RIGHT3 UPPER 2 Select a voice group. 3 Select a voice. 4 Play the voices. For example, select “CHOIR & PAD.” For example, select “Hah Choir.” The voice selected for R1 (page 16) and the voice selected here are sounded simultaneously in a layer.
Playing Voices Playing Different Voices with the Left and Right Hands 1 Press the PART ON/OFF [LEFT] button to turn the LEFT part ON. Automatically turned on PART SELECT LEFT HOLD LEFT RIGHT1 LOWER RIGHT2 PART ON/OFF RIGHT3 UPPER 2 Select a voice group. 3 Select a voice. For example, select “STRINGS.” For example, select “Symphon. Str.” 4 Play the voices. The notes you play with your left hand sound one voice, while the notes you play with your right sound a different voice (or voices).
Playing Voices Organ Flutes Reference on page 62 The 9000Pro uses advanced digital modeling technology to recreate the legendary sound of vintage organs. Just as on a traditional organ, you can create your own sound by increasing and decreasing the levels of the flute footages. 1 Press the [ORGAN FLUTES] button. 2 Use the LCD [1] - [8] buttons to adjust the footage settings. The footage settings determine the basic sound of the organ flutes.
Auto Accompaniment Reference on page 70 Style related buttons Auto Accompaniment related buttons Using Auto Accompaniment 1 Select a style group. • The 9000Pro styles are divided into two groups : Preset styles and Flash styles. For details about Flash styles, see page 55. For this example, BALLROOM is selected. 2 Select a style. F G H I J For this example, Jive is selected. 3 Turn Auto Accompaniment on.
Auto Accompaniment 5 As soon as you play a chord with your left hand, the auto accompaniment starts. For this example, play a C major chord (as shown below). Split Point Auto Accompaniment section 6 Try playing other chords with your left hand. 7 Press the [START/STOP] button again to stop the accompaFor information on how to enter chords, see “Chord Fingerings” on page 70. niment. Try out some of the other styles... Category 8 BEAT 16 BEAT DANCE Style Name Heart Beat Comment Standard 8-beat pop.
Auto Accompaniment Style related buttons Auto Accompaniment section buttons Accompaniment Sections There are various types of Auto Accompaniment sections that allow you to vary the arrangement of the accompaniment to match the song you are playing. They are: Intro, Main, Fill-in & Break and Ending. By switching among them as you play, you can easily produce the dynamic elements of a professional-sounding arrangement in your performance. INTRO This is used for the beginning of the song.
Auto Accompaniment ■ Accompaniment Structure Diagram INTRO INTRO I INTRO II INTRO III MAIN VARIATION via FILL IN A via FILL IN B via FILL IN B MAIN VARIATION A via FILL IN D via FILL IN C via FILL IN C MAIN VARIATION B via FILL IN A via BREAK via FILL IN D via FILL IN D MAIN VARIATION C via FILL IN B via BREAK via FILL IN A MAIN VARIATION D via FILL IN C via BREAK via BREAK Press the one of the [ENDING] buttons.
Auto Accompaniment MAIN MIXER and PART ON/OFF buttons ONE TOUCH SETTING buttons DISK DIRECT button One Touch Setting One Touch Setting is a powerful and convenient feature that automatically calls up the most appropriate panel settings (voice number, etc.) for the currently selected style, with the touch of a single button. 1 Select a style. 2 Press one of the [ONE TOUCH SETTING] buttons. For example, select “SWING & JAZZ” category and try out “BBand Ballad” (on P2).
Auto Accompaniment 3 Adjust the volume to set the optimum level balance between the accompaniment and your right hand performance. 1) Press the [MAIN MIXER] button. 2) Press the LCD button corresponding to the part of which the volume you wish to adjust. MAIN MIXER 1 2 3 4 5 6 7 8 4 Stop the accompaniment (page 21). Disk Direct Function The 9000Pro can play back style files contained on the included floppy disk. 1 Insert the “Disk Styles” disk supplied with the 9000Pro into the disk drive.
Music Database Reference on page 76 MUSIC DATABASE button If you want to play in a certain genre of music but don’t know which style and voice settings would be appropriate, the convenient Music Database can help you out. Simply select the desired genre from the Music Database and the 9000Pro automatically makes all appropriate panel settings to let you play in that music style! For a list of Music Database setup parameters, refer to page 214.
Music Database Searching the Music Database 1 Press the [MUSIC DATABASE] button. MUSIC DATABASE 2 Press the LCD [F] button to call up the Search display. 3 Select a category and set the tempo range. 4 Press the LCD [I] button to execute the Search operation. 2 F F G G H H I I J J 4 1 2 3 4 5 6 7 3 8 Press this button to call up the Keyword display, from which you can enter a keyword and search the Music Database.
Registration Memory Reference on page 163 REGISTRATION MEMORY buttons The Registration Memory gives you a convenient way to select the style, voice, and effect settings that will suit a particular type of music. You can instantly change panel settings with the touch of a single button. The Registration Memory provides up to 512 complete control-panel setups (64 banks, 8 setups each) that can be recalled instantly during your performance.
Registration Memory Registering the Panel Settings You can also create your own Registration Memory setups. 1 Set up the panel controls as required. 2 Select a Registration Bank (04 through 64). Avoid selecting one of the Registration Banks 01 through 03 (even though they can be selected), since you may inadvertently delete some important data. (See the note below.) REGISTRATION MEMORY FREEZE REGIST BANK 1~64 BAN 1 2 3 1 2 3 3 Press the [MEMORY] button.
Disk Song Playback Reference on page 78 • Make sure to read the section “Using the Floppy Disk Drive (FDD) and Floppy Disks” on page 5. Song related buttons Floppy disk drive [START/STOP] button The following disks are compatible for playback on the 9000Pro. Refer to page 6 for more details on the logos. Disks bearing this logo contain song data for voices defined in the GM standard.
Disk Song Playback 5 Start playback. • With song data software (Standard MIDI format 0) that includes lyrics, you can view the lyrics in the display during playback. See page 79 for details. For appropriate song data, the 9000Pro can display the lyrics in one of five different languages: English, German, French, Spanish and Italian. START/STOP 6 Turn individual tracks ON or OFF (muted) as required. 1) Press the [PART ON/OFF] button.
Vocal Harmony Reference on page 80 CAUTION Pickup of extraneous sounds from the microphone can cause distorted Vocal Harmony sound. • Separate the microphone from the speakers as much as possible. MIC/LINE IN buttons VOCAL HARMONY buttons This extraordinarily powerful feature uses advanced voice-processing technology to automatically produce vocal harmony based on a single lead vocal.
Vocal Harmony 3 Press the VOCAL HARMONY [SELECT] button. 4 Select a Vocal Harmony type. A B C D For this example, “JazzSisters” is selected. E 5 Play the keyboard while singing into the microphone. The Vocal Harmony effect can be controlled by the chords you play in the Auto Accompaniment section (the keys to the left of the split point). Split Point Auto Accompaniment section Vocal Harmony with Song Playback The 9000Pro can properly play back disk songs that contain Vocal Harmony data.
The Multi Pads Reference on page 77 Multi Pads The 9000Pro Multi Pads can be used to play a number of short pre-recorded rhythmic and melodic sequences that can be used to add impact and variety to your keyboard performances. Playing the Multi Pads 1 Use the M.PAD BANK [-]/[+] buttons to select a Multi Pad Bank. STOP M.PAD BANK 1~60 Multi Pad Bank number • You can even play two, three, or four Multi Pads at the same time.
Voice Effects Reference on page 60 VOICE EFFECT buttons The 9000Pro features a sophisticated multi-processor effect system which can add extraordinary depth and expression to your sound. Applying the Voice Effects Voice Effect TOUCH SUSTAIN DSP(4~7) SLOW/FAST HARMONY/ECHO POLY/MONO Comments This button turns the touch response of the keyboard on or off. When OFF, the same volume is produced no matter how strongly or softly you play the keyboard.
Song Creator Reference on page 110 DIGITAL RECORDING button The powerful and easy-to-use Song Creator feature lets you record your own keyboard performances to disk.
Song Creator 6 Press the [NEXT] button. 7 Set up for recording. • Select the required voice(s), select a style, if required. Set up all parameters as desired for recording. • Turn the metronome on or off as required. F G PAGE CONTROL BACK H NEXT I J Turn the metronome on or off as required. 8 Start recording. Recording starts as soon as you play a key on the keyboard. 9 Stop recording. When you finish playing, press the [START/STOP] button.
Song Creator DIGITAL RECORDING button Multi Track Recording 1 Press the [DIGITAL RECORDING] button to engage the Record mode. 2 Select “SONG CREATOR.” 3 Select “NEW SONG.” 4 Select “MULTI TRACK RECORD.” 2 3 A A B B C C D D E E A 4 B C D E 5 Set the track modes. • When set to “REC,” your keyboard performance and Multi Pad playback can be recorded to the corresponding tracks.
Song Creator 6 Press the [NEXT] button. 7 Set up for recording. • Select the required voice(s), select a style, if required. Set up all parameters as desired for recording. • Turn the metronome on or off as required. • Pressing the [REHEARSAL] LCD button before recording lets you practice the part to be recorded. This is particularly convenient for mastering parts for punch-in recording — before you actually record them. F G PAGE CONTROL Turn the metronome on or off as required.
Sampling Reference on page 84 DIGITAL RECORDING button This function lets you record your own sounds via a microphone. Once it is recorded, the resulting “sample” can be played at various pitches from a keyboard. Recording a Sample 1-4 Use the same operation as in “Setting up” (page 32). 5 Press the [SOUND CREATOR] button. • The notes and cautions contained on page 80 also apply to Sampling. 6 Select “SAMPLING.” 7 Select “RECORDING.” A A B B C C D D E E 8 Press the [NEXT] button.
Sampling 11 Press the LCD [START] button and speak into the microphone to start the sampling. Sampling starts when the input level reaches the Auto Trigger level (page 84). Indicates the amount of remaining sampling memory/time. 12 Press the LCD [STOP] button to stop the sampling.
Using the Optional Plug-in Board Reference on page 64 Plug-in Voice related buttons Up to two boards can be installed to the bottom panel. Installing an optional Plug-in Board to the 9000Pro lets you greatly expand the sonic palette of the instrument. Once you've installed an optional Plug-in Board to the 9000Pro, you have instant access to a whole new set of amazing, dynamic voices, in addition to the built-in voices of the 9000Pro.
Using the Optional Plug-in Board 5 Press the [SLOT 1] button and select a voice group. • A single Plug-in Board can only sound one part (one Plug-in voice) at a time. This means that the playing methods described on page 17 (turning parts R1 - R3 on simultaneously) and page 18 (turning parts R and L on simultaneously) cannot be used, even if you select the same slot’s Plug-in Board voices for the R1 - R3 and L parts. For this example, [II] is selected. 6 Select a voice.
Display-based Controls As you’ve seen in “Quick Guide” above, the 9000Pro features an exceptionally large and easy-tounderstand display. It provides comprehensive at-a-glance information on all current settings, and gives you convenient, intuitive control over the 9000Pro’s functions.
Display-based Controls ● BEAT indicators These indicators flash at the current tempo and indicate the current beat during accompaniment and song playback. 4/4 time 3/4 time 1st beat 2nd beat 3rd beat ● [DIRECT ACCESS] button See page 48. 4th beat Display Messages The large 9000Pro display panel facilitates operation by making it possible to display comprehensive message and prompts that will guide you through certain operations. These messages can be displayed in one of five different languages.
Display-based Controls Name Entry A number of 9000Pro functions allow you to enter a name for, for example, a file you will be saving to disk, a custom voice or style, etc. The name entry procedure is essentially the same in all cases (only the maximum number of characters which can be entered will vary). An example display which includes NAME entry parameters is shown below: When this icon appears in the display, you can directly call up the Name Entry page by pressing the corresponding button.
Display-based Controls ■ Selecting voices, styles, songs and Registration Memory settings First, from the main display, press any key on the computer keyboard. Then select the desired category (voice, style, song, Registration Memory) by repeatedly pressing any key on the computer keyboard, with the exception of the DELETE key and the number keys. (The selected category is indicated in the display.) Then enter the desired number from the computer keyboard, according to the rules below. • Voice .............
Display-based Controls Direct Access By using the [DIRECT ACCESS] button, you can instantly call up the desired display. When you press the [DIRECT ACCESS] button, an LCD message prompts you to press the appropriate button. Press the button corresponding to the settings you want to display. For this example, the display for setting the Split Point (page 159) is called up. DIRECT ACCESS See next page for the Direct Access Chart.
Display-based Controls ■ Direct Access Chart DIRECT ACCESS Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 Function of the accessed LCD display Operation: Mixing Console MAIN VARIATION [A] MAIN VARIATION [B] MAIN VARIATION [C] MAIN VARIATION [D] FILL IN & BREAK [ ] FILL IN & BREAK [ ] FILL IN & BREAK [ ] FILL IN & BREAK [ ] VOC
Function Tree Button/Controller Numbers at the left end correspond to ones in “Top panel & connections” on page 10. LCD title Function See pages 1 POWER ON/OFF – Turning the POWER on or off 14 2 MASTER VOLUME – Adjusting the overall volume 14 3 PITCH BEND – Bending notes played on the keyboard up or down 59 4 MODULATION – Applying a vibrato effect to notes played on the keyboard 59 5 SONG [SONG PLAYER] [I] ...
Function Tree Button/Controller 8 MENU [FUNCTION] LCD title Function MASTER TUNE/SCALE TUNE MASTER TUNE SCALE TUNE Setting the overall pitch of the 9000Pro Tuning each individual note of the octave 158 158 Setting the point on the keyboard that separates the left-hand and right-hand section Selecting the way in which chords are played with your left hand 159 Selecting the foot controller (page 13) function Selecting the panel controller (e.g.
Function Tree Button/Controller 10 DIGITAL STUDIO [SOUND CREATOR] LCD title PLUG-IN VOICE VOICE EDIT • BOARD VOICE • E1: EG/VIB • E2: CTRL • E3: NATIVE PRM.
Function Tree Button/Controller LCD title Function 13 DEMO [DEMO] 9000Pro DEMO Demo song selection/playback 14 VOICE EFFECT [TOUCH] [SUSTAIN] [DSP(4~7)] [SLOW/FAST] – – – – [HARMONY/ECHO] [POLY/MONO] 15 MUSIC DATABASE [MUSIC DATABASE] – – MUSIC DATABASE See pages 56 Turning Touch response on or off Turning Sustain on or off Turning DSP effects on or off Setting the DSP effect variations of the selected voice part to the SLOW or FAST Turning Harmony/Echo on or off Setting the selected voice part
Memory Structure The 9000Pro features three different memory provisions for storing your original data: Flash ROM, RAM, and Disk. ● Flash ROM The 9000Pro includes special Flash ROM memory. Unlike conventional ROM, Flash ROM can be overwritten — allowing you to store your own original data. The contents of Flash ROM are maintained even when the power is turned off. ●RAM This is the conventional “internal” user memory of the 9000Pro.
Memory Structure ■ About System Backup Important information about the 9000Pro’s current settings, such as the selected style number, the Split Point setting, the fingering mode, and MIDI-related settings, can be retained in the Flash ROM. To do this, press the quarter note icon button ( ) from the main display and follow the on-screen instructions. For a complete list of System Backup parameters, refer to page 214.
Demonstration The 9000Pro has been programmed with a variety of demonstration songs that showcase the sophisticated capabilities of the instrument. The songs can be played individually or all together, in their normal sequence or random order. DEMO Select a song category. Select a song category. Reference Use this button to start/stop playback. 56 Turn Repeat on or off. When set to ON, the selected song or sequence of songs will be repeated until the STOP LCD button is pressed. Select a song.
Voices The 9000Pro has a huge selection of various musical instrument voices which you can play. Try out the different voices referring to the voice list at the end of this manual (page 192). For basic information on selecting voices, refer to page 16 in the “Quick Guide.” Parts: Right1, Right2, Right3 and Left Quick Guide on page 16 The 9000Pro allows you to individually select and play up to four parts at the same time in a number of ways. A range of voices can be assigned to each part.
Voices Voices The 9000Pro actually includes several voice categories: the 9000Pro original preset voices, percussion kits, the XG voices, the Organ Flutes voices, and Custom voices. In addition, you can expand the amount of voices by installing the Plug-in Boards to the 9000Pro. Using the optional Plug-in Board(s). ● Preset Voices The Preset Voices are specially recorded and programmed voices exclusive to the 9000Pro. • Keyboard Percussion .....
Voices ■ Maximum Polyphony The 9000Pro features maximum polyphony of 126 notes. Since Auto Accompaniment uses a number of the available notes, the full 126 notes will not be available on the keyboard when Auto Accompaniment is used. The same applies to the Voice R2, Voice R3, Voice L, Multi Pad, and Song functions. When the maximum polyphony is exceeded, notes are played using last-note priority.
Voices Voice Effects Quick Guide on page 35 The [VOICE EFFECT] buttons turn the corresponding effects on (indicator lit) or off (indicator out). VOICE EFFECT TOUCH SUSTAIN DSP(4~7) SLOW/ FAST HARMONY/ECHO POLY/ MONO ● Touch The keyboard of the 9000Pro is equipped with a touch response feature that lets you dynamically and expressively control the level of the voices with your playing strength — just as on an acoustic instrument.
Voices Other Keyboard-related Functions ● Left Hold LEFT HOLD This function causes the Left part voice to be held even when the keys are released. Nondecaying voices such as strings are held continuously, while decay-type voices such as piano decay more slowly (as if the sustain pedal has been pressed). This function is especially effective when used with the auto accompaniment.
Organ Flutes Quick Guide on page 19 In addition to the many organ voices in the [ORGAN] voice category, the 9000Pro has an ORGAN FLUTES voice which can be assigned to the currenty selected part and edited by pressing the VOICE [ORGAN FLUTES] button. Basic Procedure Press the [ORGAN FLUTES] button. Adjust the parameters. Select this to call up the Preset Organ Flutes display. Select this to call up the display of the Volume/ Attack settings. Select this to call up the display of various settings.
Organ Flutes Vibrato Depth Footage Volume Mode Attack Length Response Reverb Depth Chorus Depth DSP on/off DSP Depth Vibrato Speed DSP Type Slow/Fast EQ Low EQ High Can be set to any of three levels via the Vibrato Depth LCD button. The button sequentially selects a depth of “1”, “2”, or “3”. The footage settings determine the basic sound of the organ flutes.
Plug-in Voices Quick Guide on page 42 By installing an optional Plug-in Board to the 9000Pro, you can gain instant access to a whole new assortment of amazing voices. Instructions on selecting and playing the Plug-in Voices are given in the Quick Guide on page 42. In the following section, you'll learn more about how the Plug-in Voices are used and managed, and how they fit into the 9000Pro's system.
Plug-in Voices ● Board Custom Voices As mentioned above, the Board voices are the internal voices of the Plug-in Board, and provide the basic material for the Plug-in voices as played from the 9000Pro. Among the Board voices are a special set of voices — Board Custom voices — which can be edited from a computer connected to the 9000Pro. Each Plug-in Board comes with its own special editing software (to be used as a plug-in with XGworks), and the Board Custom voices are edited with this software.
Plug-in Voices Plug-in Manager This function lets you manage the Plug-in Voice related parameters as disk files. The following three types of parameters (described in the illustration on page 64) are available: Plug-in Custom Voices Native System Parameters Board Custom Voices These can be edited via the Plug-in Custom Voice Creator function (page 102). These can be edited via the Native System Parameter Edit function (page 105). Available parameters vary according to the installed board.
Plug-in Voices Select the destination memory. PAGE CONTROL BACK NEXT Follow the on-screen instructions. ● Individual This method lets you individually load the three types of parameters explained in the chart on page 66. Select this to display the property of the selected file. PAGE CONTROL BACK If an optional SCSI device is connected or the optional internal hard disk is installed, select the appropriate device. See page 150 for details. NEXT Select the file to be loaded.
Plug-in Voices ■ Save This allows you to copy Plug-in Voice data from Flash ROM to disk. The explanations here apply to step #4 on page 66. • The Plug-in Voice related data in Flash ROM (page 64) is maintained even if the Plug-in Board has been removed. Make sure to execute the save operation if you have important data in Flash ROM that you wish to keep. Follow the on-screen instructions.
Plug-in Voices ■ Plug-in Setting This lets you set other useful settings for the Plug-in Board. The explanations here apply to step #4 on page 66. You can store the settings in this display to Flash ROM by using this button. This function is for Multi Part Plug-in Boards (e.g., PLG150-XG), and lets you select the tone generator for XG disk song playback. When "SLOT 1" or "SLOT 2" is selected, the installed Plug-in Board is used as the tone generator for the XG disk song playback.
Auto Accompaniment Quick Guide on page 20 The auto accompaniment feature puts a full backing band at your fingertips. To use it, all you have to do is play the chords with your left hand as you perform and the selected accompaniment style matching your music will automatically play along, instantly following the chords you play. With auto accompaniment, even a solo performer can enjoy playing with the backing of an entire band or orchestra.
Auto Accompaniment Chord Types Recognized in the Fingered Mode ● Example for “C” chords CmM 7 CmM 7 (9) ( ) ( ( C (b5) CM7 b5 Cm 7 (9) Cm 7 (11) ) CM 7 aug CM7 (#11) ( Caug ) Csus 4 CM 7 (9) CM 7 ) C6 ) C (9) ( C 6 (9) C Cm (9) Cm 6 Cm 7 Cm 7 b5 CmM 7 b5 Cdim Cdim 7 C7 C 7 (13) C 7 (#9) C 7 b5 C 7 aug C 7 sus4 Seventh add thirteenth [7(13)] Seventh sharp ninth [7(#9)] Seventh flatted fifth [7b5] Seventh augmented [7aug] Seventh suspended fourth [7sus4] One plus two plu
Auto Accompaniment Fade-ins and Fade-outs The [FADE IN/OUT] button can be used to produce smooth fade-ins and fade-outs when starting and stopping the accompaniment. To produce a fade-in/out : 1 Press the [FADE IN/OUT] button so that its indicator lights. 2 Start the accompaniment FADEIN/OUT The sound will gradually fade in. The [FADE IN/OUT] indicator will flash during the fade-in, and then go out when full volume has been reached. 3 Press the [FADE IN/OUT] button so that its indicator lights.
Auto Accompaniment Synchro Stop When the Synchro Stop function is engaged, accompaniment playback will stop completely when all keys in the auto-accompaniment section of the keyboard are released. Accompaniment playback will start again as soon as a chord is played. The BEAT indicators will flash while the accompaniment is stopped. For basic information on playing the auto accompaniment, refer to page 20 in the “Quick Guide.
Auto Accompaniment Style Manager The 9000Pro styles are divided into two groups : Preset styles and Flash styles. Flash styles pre-recorded to Flash styles I through VIII can be replaced by the desired data with the Style Manager function. Disk Styles Save Flash Styles in Flash ROM Load Style Manager Since all Flash style data is stored to Flash ROM, any data in the selected Flash style location will be erased and replaced by your new settings.
Auto Accompaniment ■ Save Style from Flash ROM This allows you to save style data from Flash ROM to disk. When set to “with OTS,” you can save the selected style file with its One Touch Setting setups. PAGE CONTROL BACK See page 151. NEXT If an optional SCSI device is connected or the optional internal hard disk is installed, select the appropriate device. See page 150 for details. See page 151 for details on directory/file selection.
Music Database Quick Guide on page 26 For basic information on using the Music Database feature, refer to page 26 in the “Quick Guide.” This section covers how to create your own Music Database setups. For a list of Music Database setup parameters, refer to page 214. Creating the Music Database MUSIC DATABASE Press the [MUSIC DATABASE] button. Create the Music Database by following the on-screen instructions.
The Multi Pads Quick Guide on page 34 This section explains two important functions of the Multi Pads that are not covered in the “Quick Guide.” For basic information on using the Multi Pads, refer to page 34 in the “Quick Guide.” Turning Chord Match and Repeat On/Off STOP M.PAD BANK 1~60 Press the [+]/[-] buttons simultaneously. BANK VIEW 1 2 3 4 Select “REPEAT” or “CHORD MATCH.” Select this to store the settings. (Refer to the “CAUTION” note below.) Select a Bank.
Disk Song Playback Quick Guide on page 30 The 9000Pro Song mode allows song data to be played back from a floppy disk, an optional hard disk or an optional SCSI device. This section explains some important functions of song playback that are not covered in the “Quick Guide.” For basic information on playing songs, refer to page 30 in the “Quick Guide.” Selecting a Song The 9000Pro allows you to play back songs from disk, as described in the operation steps below.
Disk Song Playback Other Functions: Viewing the Lyrics and Fast Forward/Reverse Select this to call up the Lyrics display. Select this during playback to move rapidly forward through the song. This button lets you pause playback and then start again from the same point in the song. Select this during playback to move rapidly backward through the song. Song Setup This function determines certain playback settings for song data other than note on/off (for example, lyrics).
Vocal Harmony Quick Guide on page 32 This unique feature incorporates advanced voice-processing technology to automatically produce vocal harmony based on a single lead vocal. An extensive selection of preset Vocal Harmony “types” are provided, each functioning in one of three main “modes” which determine how the harmony notes are applied.
Vocal Harmony Selecting/Producing the Vocal Harmony effect Basic Procedure 4 Store your settings. 1 MONY Press the VOCAL HAR[SELECT] button. 2 Select a Vocal Harmony type. 3 parameters.
Vocal Harmony Changing the Vocal Harmony/Microphone Settings Basic Procedure Select the desired parameter. 1 Press the VOCAL HARMONY [MIC SETUP] button. Select the desired parameter. 2 Edit the Vocal Harmony/microphone parameters. ● 3-Band Equalizer Usually an equalizer is used to correct the sound output from amps or speakers to match the special character of the room. The sound is divided into several frequency bands, allowing you to correct the sound by raising or lowering the level for each band.
Vocal Harmony • Balance ................This lets you set the balance between the lead and Vocal Harmony. Raising this value increases the volume of the Vocal Harmony and decreases that of the lead vocal. If it is set to the maximum value of 127, you will hear only the Vocal Harmony from the external speakers; if it is set to 0, only the lead vocal will be heard. • Mode ....................All of the Vocal Harmony types fall into one of three modes which produce harmony in different ways.
Sampling Quick Guide on page 40 This function lets you record your own sounds via a microphone or line source to be played from the keyboard. During use, sampled sounds are kept in the internal wave RAM memory. The 9000Pro comes with a 1megabyte wave memory which can be expanded up to a maximum of 65 megabytes by installing optional SIMM memory modules — see page 185 for details. Sampled wave data can be saved to floppy or hard disk.
Sampling To better understand how trigger level works, let’s look at a specific example — sampling of the phrase “a one and a two.” In this phrase, “one” and “two” are louder than the other words. Since the first “a” is lower than the trigger level, the 9000Pro doesn’t actually start sampling until the word “one.” If you want the phrase to be sampled from the first word, the trigger level should be set lower. With this new trigger level setting, the entire phrase will be sampled.
Sampling Basic Procedure 1 Press the [SOUND CREATOR] button. 2 Select “SAMPLING.” 3 Select the desired menu. 4 Follow the on-screen instructions. Refer to “Quick Guide” on page 40 for details. The operations for each function corresponding to step #4 are covered in the following explanations. Recording a Sample Quick Guide on page 40 Refer to page 40 for instructions on recording a sample. The following display will be shown in step #9 on page 40.
Sampling ■ Pre Effect You can set up a maximum of three DSP effects to be applied to the source sound as it is sampled. The DSP blocks are connected in series as shown below. The following display will be shown in step #10 on page 40. Press this button to switch between the currently selected wave and the currently selected panel voice. Select the desired DSP block. Select this to call up the storing display. Select the desired type of the selected DSP block.
Sampling Editing Wave data The illustration below applies to step #4 of the Basic Procedure on page 86. 1 tains Select a Custom Voice which conthe wave(s) you wish to edit. 3 and Select the desired Waveform/Wave edit the desired parameters. This function exports the current wave as a WAV file which can be loaded and used by other instruments or computers which can handle the WAV format. PAGE CONTROL BACK NEXT 4 Custom Store your settings as a Voice to Flash 2 Select the desired menu. ROM.
Sampling ● Loop Point This display determines how your sampled waves play back. Your sampled waves can be played back in three different ways as follows: WAVE START END START END Example WAVE A B C D E WAVE START LOOP START Start point LOOP END Loop Start point Loop End point B, C, D, C, D, C, D .... Press this to actually edit the selected wave. The LEVEL indicators the right of each address show the signal level at the current address — the longer the bar, the higher the signal level.
Sampling ● Normalize This function increases the overall level of the selected wave to ensure that it uses the full range of digital values. Press the EXECUTE LCD button to normalize the selected wave. No change will occur if the selected wave already uses the full range of digital values. ● Volume/Tune When this is turned OFF, the pitch of wave playback will be correspond to keyboard pitch.
Sampling ■ Waveform Edit ● Add Wave This function can be used to add a wave from a different waveform to the currently selected waveform. When a waveform contains two or more waves, the individual waves must be assigned to different areas of the keyboard (the waves cannot be “layered”). • The same wave cannot be added for use in multiple keyboard ranges. The Start Note at right in the display can also be specified by pressing the appropriate key on the keyboard while holding this button.
Custom Voice Creating Quick Guide on page 40 The 9000Pro has a Custom Voice Creator feature that allows you to create your own voices. Once you’ve created a voice, you can store it to a Custom voice location for future recall. Basic Procedure 1 CREATOR] Press the [SOUND button. 2 Select “CUSTOM VOICE.” • The following voices cannot be edited via the Custom Voice Creator.
Custom Voice Creating Easy Editing ■ Parameters FILTER EG VIBRATO VOLUME Determines the timbre of the voice. See below for details. The EG (Envelope Generator) parameters affect the volume envelope of the voice. See below for details. Sets up the vibrato effect. See below for details. Determines the volume of the voice. ● FILTER (FREQ. and RESONANCE) These settings determine the overall timbre of the sound by boosting or cutting a certain frequency range.
Custom Voice Creating Full Editing ■ Element selection Each 9000Pro voice can have up to eight separate “elements.” These elements are the basic sonic building blocks of the sound — with each element having its own waveform, envelope generator settings, and other parameters.
Custom Voice Creating ● E1: WAVEFORM See page 85 for details about Waveform. Use the CATEGORY, VOICE, and WAVEFORM LCD buttons to select the waveform for the custom voice. (This is the “raw” sound on which the voice is based.) Waveforms created by the SAMPLING feature (page 84) are also available for selection in the “SAMPLING” CATEGORY. NOTE LIMIT specifies the note range over which the voice will sound, and VELOCITY LIMIT sets the maximum velocity range for the voice.
Custom Voice Creating ● E2: EG An acronym for Envelope Generator, a block that modifies the level of the tone generator from the moment that a note is played until the sound decays to silence. The Amplitude EG controls the volume level, the Pitch EG controls the pitch, and the Filter EG controls the filter cutoff frequency. Indicates the EG settings as a diagram. Resets the currently selected EG parameters to their most basic settings.
Custom Voice Creating • FILTER RATE and FILTER LEVEL (Filter EG settings) The FILTER RATE parameters are time-related; they determine how long it takes for the sound’s timbre to change from level to level (as set in FILTER LEVEL). The FILTER LEVEL parameters are filter-related; they determine how much the sound changes in timbre over time (as set in FILTER RATE). A setting of “0” is the default value.
Custom Voice Creating ● E4: LFO An acronym for Low Frequency Oscillator, a block that produces a low frequency signal. The LFO can be used to modulate pitch, filter cutoff frequency, or amplitude to create a wide range of modulation effects. Vibrato effect based on LFO modulation, with a variable delay between the time a key is played and the beginning of the vibrato effect. See the diagram below. Selects the LFO wave. Various kinds of modulated sounds can be created depending on the selected wave.
Custom Voice Creating ● VOICE SET See page 163 for details about the Voice Set function. You can specify the Voice Set data to the Custom Voice.
Creating Plug-in Custom Voices Just as with the preset voices, you can use the voices of the Plug-in Board as basic material for crafting your own original Plug-in voices. Once you’ve created a voice, you can store it to a Plug-in Custom voice location for future recall. Guidelines ■ Memory Structure of the Plug-in Voices The illustration below is basically same as the one on page 64.
Creating Plug-in Custom Voices Basic Procedure 1 CREATOR] Press the [SOUND button. 2 VOICE." Select "PLUG-IN Steps #3 - #5 (described in detail on page 106) are optional. Use these operations if you wish to edit the Board Custom Voices and the Native System Parameters on which the Plugin Custom Voices are based. 6 voice Select a menu for editing the parameters via the panel operations. 3 ing Select a menu for editthe Board Custom Voices on a computer, if necessary.
Creating Plug-in Custom Voices Voice Editing ■ Board Voice selection The explanations here apply to step #7 on page 101. Select the desired menu and edit the voice parameters. Select this to store the edited voice parameters to Flash ROM (step #8 on page 101). Can be used to compare the sound of the originally selected voice with the changed voice.
Creating Plug-in Custom Voices ■ Parameters The explanations here apply to step #7 on page 101. ● E1: EG/VIB The explanations of each parameter are same as Easy Editing in the Custom Voice Creating section on page 93. Select this to go to the Store display (step #8 on page 101). Select the desired menu. ● E2: CTRL (Control) Select this to go to the Store display (step #8 on page 101). Select the desired menu. Sets the depth and the offset of the Initial Touch Sensitivity.
Creating Plug-in Custom Voices ● E3: NATIVE PRM. (Native Part Parameter) The word “native” here describes the parameters that are exclusive to each of the Plug-in Boards. Because of this, the editing screens displayed on the 9000Pro will differ depending on the particular Plug-in Board being used. For example, when editing Plug-in voices of the PLG150-DX, parameter names such as “Carrier” and “Modulator” which are unique to the FM Synthesis system are displayed, as shown below on the left.
Creating Plug-in Custom Voices Native System Parameter Editing The word “native” here describes the parameters that are exclusive to each of the Plugin Boards. Because of this, the editing screens displayed on the 9000Pro will differ depending on the particular Plug-in Board being used. For example, when editing Plug-in voices of the PLG150-VL, parameter names such as “WX Lip” and “Brth Curv” (Breath Curve) which are unique to the VL tone generation system are displayed, as shown below on the right.
Creating Plug-in Custom Voices Voice Editing on a Computer You can edit Board Custom Voices and Native System Parameters from your computer, using special plug-in software for the XGworks (or XGworks lite) program. 1 Connect your personal computer to the 9000Pro. See page 172 for details about connecting a computer. Please note that the MIDI A terminal (or the TO HOST terminal) should be used when editing the Board Custom Voices on a computer. 2 Install the software to the computer.
Creating Plug-in Custom Voices 4 Load the appropriate files to both the 9000Pro and your computer. ● When editing voices on an installed Plug-in Board for the first time: Make sure to load the appropriate files (on the floppy disk included with the 9000Pro) to the 9000Pro as follows. For the PLG150-AN board only, you'll need to also load the appropriate file (below) to your computer. PLG150-AN PLG150-PF PLG150-DX PLG150-VL File name to be loaded to the 9000Pro to the PC 150AN CsVce.xvc 150AN CsVce.
Creating Plug-in Custom Voices Board Custom Voice Backup Any editing you do to the Board Custom Voices (via computer connected to the 9000Pro) is lost when you turn off the power of the 9000Pro. If you want to keep your original voice data, you can use the Board Custom Voice Backup function to back up the edited Board Custom Voices to Flash ROM. The illustration below applies to step #5 of the Basic Procedure on page 101. • Some Plug-in Boards (e.g.
Creating Plug-in Custom Voices ■ Using the Plug-in voices in Song Creator See page 125. ■ Differences between the PLG150 and PLG100 series (Single Part Plug-in Boards) If you intend to use Single Part Plug-in Boards, Yamaha recommends that you use the PLG150 series boards exclusively. For this reason, the included floppy disk features voice data for PLG150 series Plug-in Boards. However, you can use the PLG100 series if you keep in mind the following points and anomalies.
Song Creator Quick Guide on page 40 With the powerful and easy-to-use song creating features, you can record your own keyboard performances to a floppy disk as a User song, and create your own complete, fully orchestrated compositions. Each User song lets you record up to sixteen independent tracks. These include not only the voices for the keyboard performance (R1, R2, R3, L), but also the auto accompaniment parts and Vocal Harmony effect.
Song Creator Basic Procedure 1 Press the [DIGITAL RECORDING] button. 2 CREATOR.” Select “SONG 3 menu. Select the desired 4 method. Select the Record • If an optional hard disk has been installed or an optional SCSI device has been connected, you can also save the recorded song data to these in step #7. When selecting "MULTI TRACK RECORD." When selecting "QUICK RECORD." 5 Set up for the recording. — See page 112 ● Quick Recording This screen appears only when selecting “CURRENT SONG” in step #3.
Song Creator Track Setting for Recording (Multi Track Recording) The explanations here apply to step #5 on page 111. Select the desired menu. See page 125. See “Part Selecting/ Record Selecting” on page 113. No data Muted track Play track Select the part for the corresponding track. Record track See “Delete” on page 113. Set the desired track to “REC.” Select “REC MODE” which appears when selecting “CURRENT SONG” in step #3. Select this to return to the TRACK main display. Set the related parameter.
Song Creator ■ Punch In Trigger • First Key On ...... When FIRST KEY ON is selected, recording will begin when the first key is played on the keyboard. • Footswitch 1/2 ... When FOOT SW 1 or FOOT SW 2 is selected, recording will begin when a footswitch connected to the corresponding rear-panel FOOT SWITCH jack is pressed. • Auto Set ............ When AUTO SET is selected, the punch-in and punch-out measures are specified by the IN and OUT buttons (i.e.
Song Creator Song Edit Functions (Multi Track Recording) The explanations here apply to step #6 on page 111. ■ Quantize Quantize lets you “clean up” or “tighten” the timing of a previously recorded track. For example, the following musical passage has been written with exact quarter-note and eighthnote values. Even though you think you may have recorded the passage accurately, your actual performance may be slightly ahead of or behind the beat (or both!).
Song Creator ■ Track Mixing This function allows data from two tracks can be mixed and the results placed in a different track , or data to be copied from one track to another. Press this to execute the Track Mix operation. After execution the this button changes to an UNDO button which can be used to undo the copy/mix operation if the results are not satisfactory (the “UNDO” button will only remain active until the next operation is performed). Specify the tracks to be mixed.
Song Creator Step Recording (Multi Track Recording) The Step Recording feature makes it possible to record notes with absolutely precise timing. The explanations here apply to step #5 on page 111. ■ Entering the Note Event This section explains how to step-record notes, using three specific examples. • Example 1 1 Call up the Step Recording display by pressing the [STEP REC] button. Make sure this is selected. 2 Play the keys C, D, E, F, G, A, B and C in order.
Song Creator • Example 2 1 w e Press this while holding F. q Select this resolution. w 2 e r q Select this resolution. q Press this button, repeatedly if necessary, to enable the dotted note selectors at the bottom of the display. (Pressing the button alternately switches the note selectors among three basic note values: normal, dotted and triplet.) 3 e w Select this resolution. 4 q Press this button, repeatedly if necessary, to re-enable the normal note selectors. e w Select this resolution.
Song Creator • Example 3 1 w Press and hold C3. q Select this resolution. e Press this again while holding C3. 2 q Press and hold C3 and E3. w Press this while holding C3 and E3. 3 q Press and hold C3, E3 and G3. w Press this while holding C3, E3 and G3. 4 q Press and hold C3, E3, G3 and C4. w Press this while holding C3, E3, G3 and C4. e Press this while holding C3, E3, G3 and C4, and release the four keys.
Song Creator The functions of each menu item in the display are explained below. When this is set to on (highlighted), you can play only the currently displayed track. Select the track to be recorded. This specifies the velocity for the next note to be entered. See "Velocity settings" below. This sets the note length (time that the note is actually sounded), as a percentage of the step time. See "Gate time settings" below.
Song Creator ■ Entering other events (Event List) In addition to Note on/off, the following events can be recorded in the Event List display. ● Conductor Track: • Tempo • Time Signature • End Mark • System Exclusive (XG parameters) • System Exclusive (others) * • Meta Event * * These are displayed only and cannot be edited. ● Tracks 1 through 16: • Note on/off ........................ Messages which are generated when the keyboard is played.
Song Creator ■ About Multiple Event Selection This convenient feature lets you select several events together, making it possible to change the values of many different events at once, or easily and quickly copy many events to another location. • Changing the values of multiple events In the example explanation below, we’ll increase the velocity of the selected note data by 20. q Using the [ ] button, move the cursor to the first event at the top of Event List, and select the velocity value.
Song Creator The clipboard is a temporary “holding place” for the copied data (as done in Steps #3 and #4 above). Once the data is in the clipboard, and as long as no other data has been copied there, the data can be pasted to other locations — as many times as desired. Keep in mind that copying data automatically erases whatever data was originally in the clipboard. (The data at the original location in the song remains intact.
Song Creator MAIN D CM7 Dm7 Em7 2 "FILL Press the [FILL] button to specify the section IN C" and enter the chords as shown at 002:3:000 right. Play “Dm7.” 002:4:000 FILL IN & BREAK Play “G7.” Select this resolution and play chords as shown at right. MAIN D CM7 FILL IN C Dm7 Em7 Dm7 G7 3 selected. The [MAIN C] section is automatically ACCOMPANIMENT CONTROL A B C D 003:1:000 MAIN VARIATION Play “C.
Song Creator “END MARK” is shown in the display, indicating the end of the song data. The End Mark position for Chord Step is automatically determined according to the section that is input at the end of the song. • Intro................. The End Mark is automatically recorded to a point following the Intro data (however many measures it is from the position of the last input to the end of the Intro data). • Main ................
Song Creator ■ Event Filter This function lets you select the event types that appear on the editing displays. To select an event for display, place a checkmark in the box next to the event name. To filter out an event type (so that it does not appear on the list), remove the checkmark so that the box is empty. • Style Number, Section Name, Chord Name, and Tempo are on (checked) by default. Selects only chord data; checkmarks for all other boxes are removed.
Style Creator The 9000Pro lets you create original styles which can be used for auto accompaniment in the same way as the preset styles. Guidelines for Style Creating When creating a song (page 110), you record your keyboard performance to the 9000Pro as MIDI data. Creating of styles, however, is done in a different way. The Style Creator provides two basic ways: assembling and recording. ■ Assembling styles .......
Style Creator The following functions are also available: • Revoice ........................Determines the basic volume, tempo, and Part on/off settings for your original style. • Groove & Dynamics .....This gives you a comprehensive variety of tools for changing the rhythmic “feel” of your original style. Specifically, it allows you to alter the timing for each section and velocity of notes for each track. • Setup ...........................
Style Creator Basic Procedure 1 RECORDING] Press the [DIGITAL button. 2 Select “STYLE CREATOR.” 3 style Select these to create a by using the preset style data as a starting point. 3 style Select this to create a new from scratch. Select a preset/flash style. The Easy Edit mode makes it possible to create new styles by editing the Preset/Flash styles. Select this to call up the Step Recording display. 4 Select the desired menu. 5 Create/Edit a style by following the on-screen instructions.
Style Creator Style Assembly — Creating a Style This operation lets you create the patterns (rhythm, bass and chords) that will make up your original style. The explanations here apply to step #5 of the Basic Procedure on page 128. ● Set up for creating a style. • The length in measures for all sections (excepting Fill In and Break) can be set from this display. The Fill In and Break sections are limited to one measure. Set the Pattern Length of the selected section. Select a section to be created.
Style Creator Revoice (Easy Edit) The Revoice parameters let you determine the basic volume, tempo, and Part on/off settings for your original style. The explanations here apply to step #5 of the Basic Procedure on page 128. ● Select the Style and the Section to be revoiced. PAGE CONTROL BACK NEXT ● Edit the Revoice parameters. The 9000Pro Revoice function lets you change the following parameters for each track.
Style Creator Groove & Dynamics (Easy Edit) The Groove and Dynamics parameters give you a comprehensive variety of tools for changing the rhythmic “feel” of your original style. The explanations here apply to step #5 of the Basic Procedure on page 128. ● Select the Style and the Section. Groove parameters Beat Specifies the beats to which groove timing is to be applied (i.e.
Style Creator Style Recording (Full Edit) This section explains how to record all parts by playing the keyboard. The explanations here apply to step #5 of the Basic Procedure on page 128. ■ Basic Setting for Recording Select the desired menu. • Section ...................Select the section you want to program. • Pattern Length .......Select the desired number of measures (1-32) for the selected section (except for FILL IN sections, which are fixed at 1 measure). • Beat .......................
Style Creator ■ Style Recording – Bass/Chord Tracks/Pad/Phrase Recording of the bass, phrase, pad and chord tracks is unlike recording of the rhythm (drum) parts in that you have to clear the track data of the original style before recording. 1 appear When this button is pressed, DELETE will for parts which contain data. 2 holding Set the desired part to "DELETE" while this button to delete all data in the corresponding parts. The data is actually deleted when this button is released.
Style Creator Style Editing (Full Edit) This section explains various parameters, other than the basic ones. The explanations here apply to step #5 of the Basic Procedure on page 128. ■ Setup Select the desired menu. ● Voice This function can be used to change the voices assigned to any of the current style’s parts. While the SETUP display is selected, all other available parameters can be modified as required via the MIXING CONSOLE displays.
Style Creator ■ Parameter Edit Select a part to be edited. Select the desired menu. See below. ● Source Root/Source Chord These settings determine the original key of the source pattern (i.e. the key used when recording the pattern). The default, CM7 (the source root is “C” and the source chord type is “M7”), is automatically selected whenever the preset data is deleted prior to recording a new style, regardless of the source root and chord included in the preset data.
Style Creator ● NTR (Note Transposition Rule) Two settings are available: • ROOT TRANS................... When the root note is transposed, the pitch relationship between notes is maintained. For example, the notes C3, E3, and G3 in the key of C will become F3, A3, and C4 when transposed to F. Use this setting for parts that contain melodic lines. • ROOT FIXED .................... The note is kept as close as possible to the previous note range.
Style Creator ● Note Limit This sets the note range (low and high limits) for the voices recorded on user style tracks. By setting the note range, you can prevent unrealistic notes (such as high notes from a bass or low notes from a piccolo) from being produced and have them shifted to an octave within the note range. Example: When low limit is “C3” and high limit is “D4.
Style Creator Custom Style Recording via an External Sequence Recorder You can create custom styles for the 9000Pro using an external sequencer (or personal computer with sequencing software), instead of using the 9000Pro’s STYLE CREATOR function. ■ Connections • Connect the 9000Pro MIDI OUT to the sequencer MIDI IN, and the sequencer MIDI OUT to the 9000Pro MIDI IN. • Make sure that the sequencer “ECHO” function is ON, and the 9000Pro LOCAL ON/OFF (page 175) is turned OFF.
Style Creator A template which is handy for creating style data is included on the supplied floppy disk (TEMPLATE.MID). • The Initial Setup area from 1|2|000 through 1|4|479 is used for voice and effect settings. Do not include note event data. • The Main A data begins at 2|1|000. Any number of measures from 1 to 255 can be used. All measures must have one of the following time signatures: 2/4, 3/4, 4/4, or 5/4.
Style Creator Step Recording (Full Edit) The Step Recording features lets you record notes with absolutely precise timing. The procedure is essentially the same as that for Song Recording, with the exception of the points listed below: • Recording resolution for the Style Creator is 96 ppq (parts per quarter-note); for Song Recording it is 384 ppq. • In Song Recording, the End Mark position can be changed freely; in the Style Creator, it cannot be changed.
Multi Pad Creator The 9000Pro has 58 recordable banks that you can use to store your own Multi Pad phrases. These original Multi Pads can be played and used in the same way as the presets. Multi Pad data can also be saved to and loaded from disk. Basic Procedure 1 RECORDING] Press the [DIGITAL button. 2 Select “MULTI PAD CREATOR.” Use the [NEXT] or [BACK] button. Select this to name the Multi Pad Bank. 3 Select a menu. Select this to store the recorded pad data to Flash ROM.
Multi Pad Creator Multi Pad Recording The explanations here apply to step #4 of the Basic Procedure on page 141. ● Start recording. Recording begins automatically as soon as you play on the keyboard. If Chord Match is set to on for the Multi Pad to be recorded, you should record using the notes of the C major seventh scale (C, D, E, G, A and B).
Multi Pad Creator Step Recording The Step Recording features lets you record notes with absolutely precise timing. The procedure is essentially the same as that for Song Recording, with the exception of the points listed below: • Recording resolution for the Multi Pad Creator is 96 ppq (parts per quarter-note); for Song Recording it is 384 ppq. • Just as with Song Recording, the End Mark position can be changed freely in the Multi Pad Creator. This allows you to finely adjust the phrase length for the Pad.
Mixing Console A full-screen mixing console which provides access to a wide range of controls for each main and accompaniment part can be selected by pressing the [MIXING CONSOLE] button. A simpler mixing console is available via the [MAIN MIXER] and the [PART ON/OFF] buttons described in “Quick Guide” on pages 24 and 31. MAIN MIXER PART ON/OFF Refer to the Quick Guide on pages 24 and 31. PART See below. Basic Procedure Pressing the [MIXING CONSOLE] button alternates among the displays as listed below.
Mixing Console Volume/EQ Filter Effect Depth VOLUME PAN- EQ EQ BRIGHT- HARMONIC REVERB CHORUS DSP POT LOW HIGH NESS CONTENT (1) (2) (3) *** *** Master Keyboard Overall All Voices VOICE R1 VOICE R2 VOICE R3 VOICE L Auto All Tracks Accompaniment RHYTHM 1 (Style) RHYTHM 2 BASS CHORD 1 CHORD 2 PAD PHRASE 1 PHRASE 2 Multi Pad Multi Pad 1~4 Song All Tracks TRACK 1 TRACK 2 • • TRACK 16 Microphone MIC Sound O : available Tune DSP (4) DSP (5) DSP (6) DSP (7) Voice DSP TRANS- TUNING OCTAVE PITCH PORTAMEN
Mixing Console Effect Type Settings With the digital effects built into the 9000Pro you can add ambiance and depth to your music in a variety of ways—such as adding reverb that makes you sound like you are playing in a concert hall for a full, rich sound. Select this to call up the display for parameter settings. Note that the contents of the Parameter display may be different according to the selected Effect Type. Select the desired block.
Mixing Console Master Equalizer Settings Usually an equalizer is used to correct the sound output from amps or speakers to match the special character of the room. The sound is divided into several frequency bands, allowing you to correct the sound by raising or lowering the level for each band. The equalizer allows you to adjust the tone or timbre of the sound to match the performance space, or to compensate for certain acoustic characteristics in your room.
Mixing Console Line Out Settings This convenient feature allows you to send the output of a selected Part or Parts to the LINE OUT jacks. For Drum Parts, you can even select specific drum sounds to be output through these jacks. In general, the extensive built-in effects and other Part controls of the 9000Pro provide all you need for processing and mixing complex multi-Part songs.
Mixing Console Example 1 — Live Performance In this example, you can send the metronome click to the drummer in your band, and keep everything in sync.
Disk/SCSI Operations The 9000Pro [DISK/SCSI] button accesses a range of functions that are used for storage and retrieval of floppy disk data. The 9000Pro can also be fitted with an optional internal hard disk or an optional connected SCSI device for massive on-line storage capacity.
Disk/SCSI Operations Basic Operation — Directory/File Selection ■ Selecting files The 9000Pro provides three ways to select files: SINGLE, MULTI, and ALL. • When set to SINGLE, you can select only one file. • When set to ALL, you can select all files. • When set to MULTI, you can select files listed consecutively. For more information about MULTI, see the example (Style Manager) below. 1 (Before Select “SINGLE.
Disk/SCSI Operations Loading Data from a Disk to Flash ROM This operation lets you load the specified file from a floppy disk, an optional hard disk, or an optional SCSI device to Flash ROM. The explanations here apply to step #3 of the Basic Procedure on page 150. ● Select a source file in the disk. CAUTION Select this to display the property of the selected file. If an optional hard disk has been installed or an optional SCSI device has been connected, the appropriate device must be selected here.
Disk/SCSI Operations Saving Data from Flash ROM to a Disk The data types described below can be saved to a floppy disk, an optional hard disk, or an optional SCSI device. The explanations here apply to step #3 of the Basic Procedure on page 150. ● Select the data type to be saved. Select the desired group of data to be saved. The data types listed at right can be set to ON or OFF as desired. SETUP EFFECT DATA REGISTRATION BANK MULTI PAD Set the data type to ON or OFF. Data types set to ON are saved.
Disk/SCSI Operations Copying Files & Copying Floppy Disks The Copy File function allows you to copy files to a different directory on the same disk, or to another disk. The Copy Floppy Disk (COPY FD) function allows you to make complete copies of floppy disks — a perfect way to make backup copies of your important data. The explanations here apply to step #3 of the Basic Procedure on page 150. ● Select the desired menu. • The COPY FD function cannot be used to copy hard disk data.
Disk/SCSI Operations Converting files This function is useful for when you want to use PSR-8000 data contained on a floppy disk with the 9000Pro, or for when you wish to install a hard disk previously installed to a PSR-8000, to the 9000Pro. The following data created via the PSR-8000 is available: • Custom Style • Song • Chord Step • Waveform CAUTION • Please note that the HD/FD cannot be used again in the PSR-8000 after using PSR8000 HD/FD function.
Disk/SCSI Operations Renaming/deleting/creating Directories The explanations here apply to step #3 of the Basic Procedure on page 150. ● Select the desired menu. PAGE CONTROL BACK NEXT Execute each operation by following the on-screen instructions. Formatting a Disk Setting up commercially available blank floppy disks for use with 9000Pro is called formatting. This function is also useful for quickly deleting unnecessary files from an already formatted disk.
Disk/SCSI Operations Checking a Disk This function can be used to check an entire disk for damaged files and recover the files so that they can be properly read. Keep in mind that, depending on the extent of the damage, some files may not be recoverable. The explanations here apply to step #3 of the Basic Procedure on page 150. ● Select the device to be checked. PAGE CONTROL BACK NEXT Execute the Check operation by following the on-screen instructions.
The 9000Pro “Functions” The 9000Pro “Function” mode includes 8 groups of functions that access a number of parameters related to overall 9000Pro operation. Basic Procedure MENU DISK/ SCSI FUNCTION A F B G C H D I E J MIDI 1 Press the [FUNCTION] button. 3 Set the parameters of the selected function. 2 Select the desired function. The operations for each function corresponding to step #3 are covered in the following explanations.
The 9000Pro “Functions” Split Point/Chord Fingering The explanations here apply to step #3 of the Basic Procedure on page 158. You can set the Split Point by pressing the desired key while holding this button. The way in which chords are played or indicated with your left hand (in the auto accompaniment section of the keyboard) is referred to as “fingering.” For details, refer to page 70.
The 9000Pro “Functions” ● Footswitch1 ● Footswitch2 This determines the functions of footswitches plugged into the rear-panel FOOT PEDAL SWITCH 1 and FOOT PEDAL SWITCH 2 jacks, and to which of the 9000Pro voices the footswitches will apply. When the Sustain, Sostenuto, Soft, Glide, Portamento, or DSP slow/fast type is selected, you can set the corresponding parts on or off as required. Select one of the footswitch functions. See below for details each function.
The 9000Pro “Functions” SYNCHRO START R1 ON/OFF R2 ON/OFF R3 ON/OFF LEFT ON/OFF OTS + OTS - Same as the [SYNCHRO START] button. Same as the [R1] button. Same as the [R2] button. Same as the [R3] button. Same as the [L] button. Recalls next higher One Touch Setting. Recalls next lower One Touch Setting. * SOFT does not affect the voice using the PLG150/100-DX board. ** GLIDE does not affect the voice using the Plug-in Board.
The 9000Pro “Functions” ● INITIAL TOUCH With this function, the 9000Pro senses how strongly or softly you play the keys, and uses that playing strength to affect the sound in various ways, depending on the selected voice. This allows you to play with greater expressiveness and add effects with your playing technique. HARD 2 Indicates current sensitivity setting. HARD 1 NORMAL Set the level at which touch response is turned off.
The 9000Pro “Functions” Registration/Freeze Group/Voice Set Settings The explanations here apply to step #3 of the Basic Procedure on page 158. ■ Registration You can enter descriptive names for each registration bank/number via the Name function. Quick Guide on page 28 Press one of these buttons to change the name of the Bank or Registration. For information about how to enter the name, refer to the Basic Operation (page 46). Select a registration bank/ number you wish to name.
The 9000Pro “Functions” Harmony/Echo Settings Quick Guide on page 35 The explanations here apply to step #3 of the Basic Procedure on page 158. Assign the Harmony effect to the various parts as listed below. Determines the lowest velocity value at which the harmony note will sound. The higher the value, the harder the keyboard must be played to apply the Harmony effect. Select a Harmony type. See below for details. Set the volume of the Harmony effect.
The 9000Pro “Functions” Video Monitor Settings The functions on this page let you set the display characteristics for the lyrics and chords (page 79) that are output to a television or video monitor connected to the [VIDEO OUT] jack (page 13). You can set the size and color of the displayed characters, as well as the color of the display background. The explanations here apply to step #3 of the Basic Procedure on page 158.
The 9000Pro “Functions” Utility Settings The explanations here apply to step #3 of the Basic Procedure on page 158. ■ Configuration ● 1, 2 This determines whether the MIDI bank select and program change numbers for each voice will be shown along with the voice number and name on the voice list display. Select this to display the system information of the 9000Pro.
The 9000Pro “Functions” ■ Time The displays from which voices and styles are selected automatically change back to the previously selected display after a short time. (when this is not set to “NEVER”). The Auto Exit Time parameter determines the time that the Voice List or Style List displays remain before returning to the previous display. When this is set to “NEVER,” the Voice List or Style List displays remain indefinitely. (You can manually return to the previous display by pressing the [EXIT] button.
MIDI Functions Built into the rear panel of the 9000Pro are two standard sets to MIDI terminals (MIDI IN A/B, MIDI OUT A/B), a TO HOST terminal, and a HOST SELECT switch. The MIDI Functions give you a comprehensive, powerful set of tools for expanding your music recording and performance possibilities. This section explains what MIDI is, and what it can do, as well as how you can use MIDI on your 9000Pro. What’s MIDI? No doubt you have heard the terms “acoustic instrument” and “digital instrument.
MIDI Functions ● Channel Messages The 9000Pro is an electronic instrument that can handle 32 channels. This is usually expressed as “it can play 32 instruments at the same time.” Channel messages transmit information such as Note ON/OFF, Program Change, for each of the 32 channels. Message Name Note ON/OFF Program Change Control Change 9000Pro Operation/Panel Setting Messages which are generated when the keyboard is played.
MIDI Functions On the 9000Pro, 16 channels of MIDI data can be transmitted/received over a single MIDI cable, or over a serial cable (using the TO HOST terminal). Since the 9000Pro features two independent MIDI “ports” (A and B), a total of 32 MIDI channels can be used simultaneously. For example, several tracks can be transmitted simultaneously, including the auto accompaniment data (as shown below).
MIDI Functions MIDI Data Compatibility This section covers basic information on data compatibility: whether or not other MIDI devices can playback the data recorded by 9000Pro, and whether or not the 9000Pro can playback commercially available song data or song data created for other instruments or on a computer.
MIDI Functions Connecting to a Personal Computer Connecting the 9000Pro to a computer (via the TO HOST terminal or the MIDI terminals) lets you take advantage of the enormous processing power and editing flexibility of computer-generated music. Connection can be done in one of two ways: • Using the 9000Pro MIDI terminals • Using the TO HOST terminal • In the explanation examples here, the MIDI A terminals are used.
MIDI Functions ■ Using the TO HOST terminal Connect the serial port of the personal computer (RS-232C terminal or RS-422 terminal) to the TO HOST terminal of the 9000Pro. For the connection cable, use the appropriate cable below (sold separately) that matches the personal computer type. ● IBM-PC/AT Series Connect the RS-232C terminal on the computer to the TO HOST terminal on the 9000Pro using a serial cable (D-SUB 9P -> MINI DIN 8P cross cable). Set the 9000Pro HOST SELECT switch to the “PC-2” position.
MIDI Functions The 9000Pro offers a range of MIDI functions that allow it to be used effectively in even the most sophisticated MIDI systems. Basic Procedure MENU DISK/ SCSI FUNCTION Preset MIDI templates (Factory Set) MIDI All Parts KBD & ACMP 2 Select the desired template. 1 Press the [MIDI] button. Master KBD1 Master KBD2 Clock Ext.A MIDI Accord1 MIDI Accord2 3 Select this to call up the MFC10 display. 3 Select this to call up the SETUP display.
MIDI Functions System Settings The explanations here apply to step #5 of the Basic Procedure on page 174. ■ Local Control “Local Control” refers to the fact that, normally, the 9000Pro keyboard controls the internal tone generator, allowing the internal voices to be played directly from the keyboard. This condition is referred to as “Local Control on” since the internal tone generator is controlled locally by its own keyboard.
MIDI Functions Receive Settings This display page allows you to specify the MIDI receive mode for each 9000Pro MIDI channels, and to specify which types of data will be received via each channel. The explanations here apply to step #5 of the Basic Procedure on page 174. • Channels 1 - 16 are handled with the MIDI A terminals or the TO HOST terminal; channels 1 - 16 of a second MIDI port or device are handled as channels 17 - 32 with the MIDI B terminals.
MIDI Functions Root Settings The note on/off messages received at the channel(s) set to “ON” are recognized as the root notes in the accompaniment section. The root notes will be detected regardless of the accompaniment on/off and split point settings on the 9000Pro panel. The explanations here apply to step #5 of the Basic Procedure on page 174. Select channel groups 1 through 8, 9 through 16, 17 through 24, and 25 through 32, respectively. Press this to set all channels to OFF.
MIDI Functions MFC10 Settings Various functions can be assigned to an optional Yamaha MFC10 MIDI Foot Controller connected to the 9000Pro. Connect the MFC10 to the MIDI B terminals and set the MIDI channel for the MFC10 messages by following the on-screen instructions. The 9000Pro provides two ways to set: Easy Setup and Full Setup. MFC10 9000Pro MIDI OUT MIDI IN MIDI cable MIDI IN MIDI OUT • When the MIDI B terminals are connected to the MFC10, the functions of the MIDI B port are limited.
MIDI Functions ■ Full Setup You can create your original settings and store them as a template. Follow the on-screen instructions to call up the template display as shown below. PAGE CONTROL BACK NEXT ● Assign various functions to the five Foot Controllers. ● Assign various functions to the five Footswitches. PAGE CONTROL BACK NEXT Select the desired function to be assigned to the selected Footswitch. Select the desired function to be assigned to the selected Foot Controller.
Installing Optional Hardware The following optional units can be installed to the 9000Pro. ● Plug-in Boards ● Hard disk unit ● SIMM Before installing the optional hardware, make sure you have a Philips screwdriver. SIMM cover Plug-in board/Hard disk cover Installation Precautions WARNING • Before beginning installation, switch off the power to the 9000Pro and connected peripherals, and unplug them from the power outlet. Then remove all cables connecting the 9000Pro to other devices.
Installing Optional Hardware Optional Plug-in Board Installation A variety of optional Plug-in boards sold separately let you expand the voice library of your instrument. The following types of Plug-in boards can be used with your instrument. • PLG150-AN • PLG100-VL • PLG100-DX • PLG100-XG • PLG150-PF • PLG150-VL • PLG150-DX CAUTION • When inserting Plug-in boards and connecting cables, make sure that you check that they are inserted and connected properly.
Installing Optional Hardware 5 Turn over the Plug-in board/Hard disk cover. This is the location for the Hard disk unit. See page 184. Plug-in board stand Plug-in board/Hard disk cover 6 Attach the Plug-in Board to the Plug-in board stand. ........................... 6-[1] First board Remove the four screws from the Plug-in stand with a Phillips screwdriver. Do not remove the other screws.
Installing Optional Hardware 8 Unfasten the cable inside the 9000Pro as shown in the following illustration. There are three cables available for installation. The two smaller cables are used for the Plug-in Boards; the larger cable is for the hard disk. Cable clip 9 Carefully plug the cable connector into the Plug-in board connector until the two notches on the cable connector lock into the sockets on the board as shown in the illustration. The two cables can be used interchangeably.
Installing Optional Hardware Optional Hard Disk Installation The hard disk used must be a 2.5-inch IDE-compatible; however, not all such drives may be installable. CAUTION • When inserting hard disk unit and connecting cables, make sure that you check that they are inserted and connected properly. Improperly inserted hard disk unit and cables may cause faulty contacts and an electrical short circuit which may cause damage or result in a malfunction.
Installing Optional Hardware 8 Attach the hard disk unit to the Plug-in board/Hard disk cover using the four screws removed in step 5. Silver screws • Depending on the type of hard disk drive you plan to install, select holes (A) or holes (B) to attach the hard disk drive. * Holes (A) are used in this illustration. You should tighten these two screws first. 9 Turn the cover over again, and attach the cable connector as shown.
Installing Optional Hardware 1-2 Use the same operation as in "Optional Plug-in Board Installation" (page 181). 3 Move to a position facing the rear panel of the keyboard, Black screws SIMM cover and remove the six screws from the SIMM cover with a Phillips screwdriver. Do not remove the other screws. 4 Remove the SIMM cover. 5 Insert the SIMMs in the SIMM slots as described below. ....................................................................................................................
Installing Optional Hardware 5-[3] Holding both edges of the SIMM module, raise it to the vertical position until it firmly locks in place with the left and right clamps. CAUTION • Make sure that the entire length of the SIMM is evenly inserted. Clamp Clamp ....................................................................................................................
Troubleshooting PROBLEM POSSIBLE CAUSE/SOLUTION • When using a mobile phone, noise is produced. Using a mobile phone in close proximity to the 9000Pro may produce interference. To prevent this, turn off the mobile phone or use it further away from the 9000Pro. • No sound results. • The R1/R2/R3/L voice volume (Main Mixer) settings could be set too low. Make sure the voice volumes are set at appropriate levels (page 25). • The Local Control function could be turned off.
Troubleshooting PROBLEM POSSIBLE CAUSE/SOLUTION • MIDI data is not transmitted or received via the MIDI A terminals, even when MIDI cables are connected properly. The MIDI terminals can only be used when the HOST SELECT switch is set to “MIDI.” All other settings (“Mac,” “PC-1” and “PC-2”) are for direct transmission/ reception with a computer.
Index A AC1 ..................................................103 Accompaniment, starting ...................20 Accompaniment, volume ...................25 After Touch ................................60, 162 All ..............................................56, 151 All Clear.............................................68 Arabic tuning ...................................158 Assignable Control ..........................103 Attack...........................................63, 93 Auto accompaniment ............
Index Modulation.................................59, 161 MODULATION wheel ..............59, 161 Multi.................................................151 Multi Assign.....................................164 Multi Finger .......................................70 Multi Pad..............................34, 77, 141 Multi Pad Creator.............................141 Multi Pad Recording ........................142 Multi Part Plug-in Board....................65 Multi Track record .....................
Appendix Voice List Voice List/Stimmenliste/Liste des voix Category Voice Name Order MSB# LSB# MIDI Program Change# Appendix/Anhang/Annexe Piano 192 Category Voice Name Order MSB# LSB# MIDI Program Change# 23 ChapelOrgn3 0 115 19 1 Live! Grand 0 113 0 24 TheatreOrg1 0 114 16 2 Grand Piano 0 112 0 25 TheatreOrg2 0 114 17 3 BrightPiano 0 112 1 26 Pipe Organ 0 112 19 4 Harpsichord 0 112 6 27 Reed Organ 0 112 20 5 GrandHarpsi 0 113 6 6 Honky Tonk 0
Voice List/Stimmenliste/Liste des voix Category Voice Name Order MSB# LSB# MIDI Program Change# Category Voice Name Order MSB# LSB# MIDI Program Change# 37 Mandolin 0 114 25 28 Fiddle 0 112 110 38 CleanGuitar 0 112 27 29 Banjo 0 112 105 39 MutedGuitar 0 112 28 30 Sitar 0 112 104 40 Funk Guitar 0 113 28 31 Koto 0 112 107 41 Jazz Guitar 0 112 26 32 Shamisen 0 112 106 42 Overdrive 0 112 29 33 Soft Violin 0 113 40 43 Finger Bass 0 112 33 3
Voice List/Stimmenliste/Liste des voix Category Voice Name Order MSB# LSB# MIDI Program Change# Category Voice Name Order MSB# LSB# MIDI Program Change# 27 Trb.
Voice List/Stimmenliste/Liste des voix Category Voice Name Order MSB# LSB# MIDI Program Change# Category Voice Name Order MSB# LSB# MIDI Program Change# 124 16 Big Lead 0 113 81 36 StyleLvFunk 127 0 17 Warp 0 117 81 37 StyLvStd+P 127 0 125 18 Adrenaline 0 113 84 38 StyLvFunk+P 127 0 126 19 Synchronize 0 112 96 20 Tiny Lead 0 118 80 1 GrandPno 0 0 0 21 Stardust 0 112 98 2 GrndPnoK 0 1 0 22 Aero Lead 0 112 83 3 MelloGrP 0 18 0 23 Mini Le
Voice List/Stimmenliste/Liste des voix Category Voice Name Order MSB# LSB# MIDI Program Change# Category Voice Name Order MSB# LSB# MIDI Program Change# 51 Log Drum 0 98 12 105 Stl&Body 0 41 25 52 Xylophon 0 0 13 106 Mandolin 0 96 25 53 TubulBel 0 0 14 107 Jazz Gtr 0 0 26 54 ChrchBel 0 96 14 108 MelloGtr 0 18 26 55 Carillon 0 97 14 109 JazzAmp 0 32 26 56 Dulcimer 0 0 15 110 CleanGtr 0 0 27 57 Dulcimr2 0 35 15 111 ChorusGt 0 32 27
Voice List/Stimmenliste/Liste des voix Category Voice Name Order MSB# LSB# MIDI Program Change# Category Voice Name Order MSB# LSB# MIDI Program Change# 159 MelloSB1 0 6 39 213 Trumpet 0 0 56 160 Seq Bass 0 12 39 214 Trumpet2 0 16 56 161 ClkSynBa 0 18 39 215 BriteTrp 0 17 56 162 SynBa2Dk 0 19 39 216 WarmTrp 0 32 56 163 SmthBa 2 0 32 39 217 Trombone 0 0 57 164 ModulrBa 0 40 39 218 Trmbone2 0 18 57 165 DX Bass 0 41 39 219 Tuba 0 0 58
Voice List/Stimmenliste/Liste des voix Category Voice Name Order MSB# LSB# MIDI Program Change# Category Voice Name Order MSB# LSB# MIDI Program Change# 92 267 Square 2 0 6 80 321 GlassPad 0 65 268 LMSquare 0 8 80 322 MetalPad 0 0 93 269 Hollow 0 18 80 323 Tine Pad 0 64 93 270 Shmoog 0 19 80 324 Pan Pad 0 65 93 271 Mellow 0 64 80 325 Halo Pad 0 0 94 272 SoloSine 0 65 80 326 SweepPad 0 0 95 273 SineLead 0 66 80 327 Shwimmer 0 20 95
Voice List/Stimmenliste/Liste des voix Category Voice Name Order MSB# LSB# MIDI Program Change# Category Voice Name Order MSB# LSB# MIDI Program Change# 375 BelChoir 0 96 101 429 ElecPerc 0 65 118 376 Echoes 0 0 102 430 RevCymbl 0 0 119 377 EchoPad2 0 8 102 431 FretNoiz 0 0 120 378 Echo Pan 0 14 102 432 BrthNoiz 0 0 121 379 EchoBell 0 64 102 433 Seashore 0 0 122 380 Big Pan 0 65 102 434 Tweet 0 0 123 381 SynPiano 0 66 102 435 Telphone
Keyboard Drum Assignments Keyboard Drum Assignments/Tastatur-Drum-Belegung/ Bank Select MSB (0-127) Bank Select LSB (0-127) Program Change (1-128) MIDI Keyboard Key Note Off Note# Note 13 C# -1 (C# 0) 14 D -1 (D 0) 15 D# -1 (D# 0) 16 E -1 (E 0) 17 F -1 (F 0) 18 F# -1 (F# 0) 19 G -1 (G 0) 20 G# -1 (G# 0) 21 A -1 (A 0) 22 A# -1 (A# 0) 23 B -1 (B 0) 24 C 0 C 1 25 C# 0 C# 1 26 D 0 D 1 O 27 D# 0 D# 1 28 E 0 E 1 O 29 F 0 F 1 O 30 F# 0 F# 1 31 G 0 G 1 32 G# 0 G# 1 33 A 0 A 1 34 A# 0 A# 1 35 B 0 B 1 36 C 1 C 2 37
Affectation des percussions de clavier Bank Select MSB (0-127) 127 Bank Select LSB (0-127) 0 Program Change (1-128) 26 MIDI Keyboard Key Alternate Analog Kit Note Off Group Note# Note 13 C# -1 (C# 0) 3 14 D -1 (D 0) 3 15 D# -1 (D# 0) 16 E -1 (E 0) 17 F -1 (F 0) 4 18 F# -1 (F# 0) 4 19 G -1 (G 0) 20 G# -1 (G# 0) 21 A -1 (A 0) 22 A# -1 (A# 0) 23 B -1 (B 0) 24 C 0 C 1 25 C# 0 C# 1 26 D 0 D 1 O 27 D# 0 D# 1 28 E 0 E 1 O Reverse Cymbal 29 F 0 F 1 O 30 F# 0 F# 1 Hi Q 2 31 G 0 G 1 Snare Noisy 4 32 G# 0 G# 1 33 A 0
Keyboard Drum Assignments/Tastatur-Drum-Belegung/Affectation Assignments/Klaviatur-Drum-Belegung/Affectationdes despercussions percussionsdedeclavier clavier Bank Select MSB (0-127) 127 Bank Select LSB (0-127) 0 Program Change (1-128) 1 MIDI Keyboard Key Alternate Standard Kit 1 Note Off Group Note# Note 13 C# -1 (C# 0) 3 Surdo Mute 14 D -1 (D 0) 3 Surdo Open 15 D# -1 (D# 0) Hi Q 16 E -1 (E 0) Whip Slap 17 F -1 (F 0) 4 Scratch H 18 F# -1 (F# 0) 4 Scratch L 19 G -1 (G 0) Finger Snap 20 G# -1 (G# 0) Click Noi
Keyboard Drum Drum Assignments/Klaviatur-Drum-Belegung/Affectation Assignments/Tastatur-Drum-Belegung/Affectation des percussions de clavier Keyboard Bank Select MSB (0-127) 127 Bank Select LSB (0-127) 0 Program Change (1-128) 86 MIDI Keyboard Key Alternate Live! Brush + Note Off Group Percussion Kit Note# Note 13 C# -1 (C# 0) 3 14 D -1 (D 0) 3 15 D# -1 (D# 0) 16 E -1 (E 0) 17 F -1 (F 0) 4 18 F# -1 (F# 0) 4 19 G -1 (G 0) 20 G# -1 (G# 0) 21 A -1 (A 0) 22 A# -1 (A# 0) 23 B -1 (B 0) 24 C 0 C 1 25 C# 0 C# 1 Bru
Plug-in Voice List Plug-in Voice List/Plug-In-Stimmenliste/Liste desdes voixvoix plug-in List/Plug-In-Stimmenliste/Liste The voices in the list below are created by loading the data from the included "Plug-in Custom Voice Disk" to the 9000Pro via the Plug-in Manager function (page 66). Die Stimmen in der untenstehenden Liste werden erzeugt, indem die Daten von der beiliegenden Diskette „Plug-In-Benutzerstimme“ mit Hilfe der Plug-In-Managerfunktion in das 9000Pro geladen werden (siehe Seite 66).
Plug-in Voice List/Plug-In-Stimmenliste/Liste des voix plug-in Category Voice Name Order MSB# LSB# MIDI Program Change# 5 Plucked 33 0 74 6 VL! Shaku 33 1 54 7 ElectrumX 33 0 120 8 Violon 33 1 37 9 Yam Gam 33 0 60 10 Edgeophon 33 0 121 11 Akkophon 33 1 59 12 Squeeze 33 1 117 13 Parlophon 33 0 88 14 Softblow 33 0 118 15 NuViolin 33 1 32 IX (Synthesizer) 1 Chamlion 33 0 51 2 Choronic 33 0 90 3 Fat Mini 33 0 87 4 Wynth 33 0 14 5 Sy
Plug-in Voice List/Plug-In-Stimmenliste/Liste des voix plug-in ● PLG150-AN Plug in Voice List Category Voice Name Order MSB# LSB# MIDI Program Change# 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 2 0 2 2 2 1 2 0 2 2 2 1 2 2 2 2 2 1 0 2 0 41 1 2 3 127 4 52 5 6 7 124 8 9 10 11 12 121 71 13 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 0 2 2 2 1 2 0 2 0 0 1 1 2 2 2 0 2 2 0 2 47 14 15 16 126 17 123 18 33 92 49 108 19 20 21 119 22 23 122 24 36 36 36 36 36 36 36 36 36 36 36
Plug-in Voice List/Plug-In-Stimmenliste/Liste des voix plug-in Category Voice Name Order 11 12 13 14 15 16 17 18 19 20 SyncBrPd Stevie Willy Pulser Lucky Zoik Rock It ANSoftBr Fire ObDetune 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 AnalogBrass Soar Major Brass High Sweep Waspad Sync Sweep Mountain BPF Pad Down Under Choclate Water Pad Vangelizm P-5 Saw Kelp Magic PWM Sweep Multi Saw So-Lina Hi Wedge Bonn 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PWM Strings Funky Insomnia Pro Attack P
Plug-in Voice List/Plug-In-Stimmenliste/Liste des voix plug-in ● PLG150-PF Plug in Voice List Category Voice Name Order MSB# LSB# MIDI Program Change# I (Piano 1) Category Voice Name Order 10 Hnkytnk3 MSB# 80 VI (E.
Plug-in Voice List/Plug-In-Stimmenliste/Liste des voix plug-in Category Voice Name Order MSB# LSB# MIDI Program Change# XI (Harpsi&Clavi) 1 Harpsi 1 80 0 6 2 Harpsi 2 80 64 6 3 RichHpsi 80 67 6 4 Clav 1 80 0 7 5 Clav 2 80 64 7 6 MuteClav 80 65 7 7 Phs Clav 80 66 7 8 PhsClav2 80 67 7 9 Wah Clav 80 68 7 10 DigiClav 80 69 7 11 Ch DgClv 80 70 7 12 PhsDgClv 80 71 7 583 Appendix/Anhang/Annexe 209
Plug-in Voice List/Plug-In-Stimmenliste/Liste des voix plug-in ● PLG150-DX Plug in Voice List Category Voice Name Order MSB# LSB# MIDI Program Change# 35 35 35 35 35 35 35 83 83 83 83 83 35 83 83 83 83 83 83 83 1 1 0 1 1 1 0 70 97 68 72 96 1 69 64 68 71 66 69 70 1 12 10 11 8 13 34 4 4 5 5 5 3 3 4 4 4 5 5 2 35 35 83 83 35 35 35 83 83 83 83 35 35 35 83 83 35 35 35 83 1 0 68 64 0 1 1 99 75 67 70 0 1 1 66 66 0 0 1 65 19 19 7 7 42 20 21 7 7 7 7 18 89 113 88 93 58 61 94 46 35 35 83 83 35 83 35 35 83 35
Plug-in Voice List/Plug-In-Stimmenliste/Liste des voix plug-in Category Voice Name Order 11 12 13 14 15 16 17 18 19 20 GrngePad WarmStr4 DX-AnSt1 DX-Str10 SyBr Pd3 SyBr Pd2 DX-Str 5 DX-Str 3 Mid Str1 DX-SySt7 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 DX-Trpt2 DX-Trpt3 DX-Trpt4 SlvTrmpt DX-Trb 2 BRASS 1 BRASS 2 BRASS 3 DX-BrSc2 CS80-Br1 DX-Tuba2 AlpsHorn DX-Horn MelwHrn1 MletHorn BlnchHrn BrsLead1 BrsLead2 BrsLead3 ChorsBrs 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Court DX-BrSc1 DX-SB
Style List Style List/Style-Liste/Liste des styles ● Preset Style/Stil Voreinstellung/Style présélectionné Category Style Name Order 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 212 8 BEAT Heart Beat 8 Beat 1 8 Beat 2 8 Beat 3 8 Beat 4 6/8 Slow Rock Spicy Beat 8 Beat Adria Off Beat 8 Beat Rock 1 Piano Ballad Guitar Ballad Organ Ballad Love Song 8 Beat Ballad 1 Acoustic Ballad Modern 6/8 Root Rock 1 So
Multi Pad Bank List Multi Pad Bank List/Multi-Pad-Bankliste/Liste des banques multi-pads Bank Number Bank Name Bank Number Bank Name 1 Live! Tom 49 DJ Set 2 2 Live! Crash 50 OrchestraHit 3 Live! Kit 1 51 Water SE 4 Live! Kit 2 52 Horror SE 5 Live! Kit 3 53 Night SE 6 ArabicPerc 1 54 Day SE 7 ArabicPerc 2 55 Car SE 8 Live! Perc 1 56 Big Bells 9 Live! Perc 2 57 Whistle 10 Dance Kit 58 MagicBell SE 11 Scat 1 59 MIDI Control 12 Scat 2 60 Scale Tune 13 Scat 3
Parameter Chart Parameter Chart/Parameter-Tabelle/ Auto Accompaniment Parameter Lock Freeze Group One Touch Setting Music Database Registration Memory Setup (Disk) System Backup VoiceSet Group o : mémorisé x : non mémorisé ON : toujours activé lorsque la fonction correspondante est appelée Parameter Lock Freeze Group o : Wird gespeichert x : Wird nicht gespeichert ON Ist immer eingeschaltet, wenn die zugehörige Funktion aufgerufen wird.
Parameter Lock VoiceSet Group Freeze Group Parameter Lock x o o x x x Acmp. x Song Name x x x x x x x x Acmp. Bass Part Harmonic Content x o o x x x Acmp. x Song Pause/Rew/FF x x x x x x x x Acmp. Chord 1 Part Harmonic Content x o o x x x Acmp. x Song Volume x x o x x x x x Acmp. Chord 2 Part Harmonic Content x o o x x x Acmp. x Song EQ Low x x x x x x x x Acmp. Pad Part Harmonic Content x o o x x x Acmp.
Parameter Chart/Parameter-Tabelle/Tableau des paramétres Parameter Lock VoiceSet Group Freeze Group Parameter Lock o o o x x EQ Voice x Left Chorus Depth o o o x x Effects Acmp. x Right 2 Part On/Off o o o x x x Voice x Left Poly/Mono ON/OFF o o o x x Voice Acmp. x Right 2 Voice # o o o x x x Voice x Left Portamento (Poly/Mono) o o o x x x Acmp. x Right 2 Release Time (Bn 48h) x x x x x Voice x x Left Tuning o o o x x x Acmp.
x x Effects Voice x Ins1. (DSP4) Fast/Slow Effect Parameter Value x x x x x x x x Ins2. (DSP5) On/Off o o o x x Effects Voice x Ins2. (DSP5) Insertion Type o o o x x Effects Voice x Ins2. (DSP5) Effect Parameter x x x x x x x x Ins2. (DSP5) Fast/Slow o o o x x Effects Voice x Ins2. (DSP5) Dry/Wet o o o x x Effects Voice Ins2. (DSP5) Fast/Slow Variation Effect Parameter Value x x x x x x Ins3. (DSP6) On/Off o o o x x Ins3.
Parameter Lock VoiceSet Group Freeze Group Parameter Lock x x x x x x x Mic Setting EQ Mid High (EQ4) Q x x x x x x x Master EQ Vocal Harmony Harmony Part x x x x x x x Mic Setting EQ High (EQ5) Q x x x x x x x Master EQ EQ Edit Q (EQ1~EQ5) x x x x x x x Master EQ EQ Edit Freq.
Parameter Lock VoiceSet Group Freeze Group Parameter Lock x x o x x x Controller x MIDI Transmit Clock x x x o o x x x Foot Sw2 Percussion Note # x x o x x x Controller x MIDI Receive transpose x x x o o x x x Foot Sw2 Percussion Velocity x x o x x x Controller x MIDI Sys Ex Transmit x x x o o x x x Modulation Wheel Assign x x o x x x Controller x MIDI Sys Ex Receive x x x o o x x x Initial Touch Sw x x o x x x Controller x MIDI Chor
Effect Type List Effect Type List/Effektartliste/Liste des types d'effet ● Reverb Type/Typ Widerhall/Type Reverb Reverb Panel Order 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Effect Name Hall1 Hall2 Hall3 Hall4 Hall5 Hall M Hall L Room1 Room2 Room3 Room4 Room5 Room6 Room7 Room S Room M Room L Stage1 Stage2 Stage3 Stage4 Plate1 Plate2 Plate3 GM Plate WhiteRoom Tunnel Canyon Basement No Effect Type MSB Type LSB 01 01 01 01 01 01 01 02 02 02 02 02 02 02 02 02 02 03 0
Effect Type List/Effektartliste/Liste des types d'effet DSP3 DSP4-7 DSP8 Panel Panel Panel Order Order Order 61 61 37 62 62 38 63 63 39 64 64 65 65 66 66 67 67 68 68 69 69 70 70 71 71 72 72 73 73 40 74 74 41 75 75 42 76 76 43 77 77 44 78 78 45 79 79 46 80 80 47 81 81 48 82 82 83 83 84 84 85 85 86 86 87 87 49 88 88 50 89 89 51 90 90 52 91 91 53 92 92 54 93 93 55 94 94 56 95 95 96 96 57 97 97 98 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 99 100 101 102 103 104 105 106 107 108 109 110 111 1
Effect Parameter List Effect Parameter List/Effektparameterliste/ XG Effect Name TypeMSB (Type LSB) HALL1,HALL2 ROOM1,ROOM2,ROOM3 STAGE1,STAGE2 PLATE (reverb, variation, insertion block) MSB = 01 MSB = 02 MSB = 03 MSB = 04 No. 1 2 3 4 5 6 7 8 9 10 Parameter Reverb Time Diffusion Initial Delay HPF Cutoff LPF Cutoff Display 0.3~30.0s 0~10 0.1mS~99.3mS Thru~8.0kHz 1.
Liste des paramètres d'effet de voix CHORUS1,2,3,4 CELESTE1,2,3,4 (chorus, variation, insertion block) No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 TREMOLO (variation, insertion block) MSB = 65 MSB = 66 Parameter LFO Frequency LFO Depth Feedback Level Delay Offset Display 0.00Hz~39.7Hz 0~127 -63~+63 0.0mS~50mS Value 0-127 0-127 1-127 0-127 See Table table#1 EQ Low Frequency EQ Low Gain EQ High Frequency EQ High Gain Dry/Wet 32Hz~2.0kHz -12~+12dB 500Hz~16.
Effect Parameter List/Effektparameterliste/Liste des paramètres d'effet de voix Effect Parameter List/Effektparameterliste/Liste des paramètres d'effet de voix STEREO DISTORTION (variation, Insertion1-4 block) STEREO OVER DRIVE (variation, Insertion1-4 block) No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Display 0~127 32~2.0kHz -12 ~ +12dB 1kHz~Thru Value 0-127 4-40 52-76 34-60 0-127 EQ Mid Frequency EQ Mid Gain EQ Mid Width Dry/Wet 100 ~ 10.
Effect Parameter List/Effektparameterliste/Liste des paramètres d'effet de voix COMPRESSOR (variation, insertion block) No. 1 2 3 4 5 6 7 8 9 10 Parameter Attack Release Threshold Ratio Output Level Display 1~40ms 10~680ms -48~-6dB 1.0~20.0 0~127 MSB = 83 Value 0-19 0-15 79-121 0-7 0-127 ENSEMBLE DETUNE (chorus, variation, insertion block) See Table table#8 table#9 Control table#10 11 12 13 14 15 16 11 12 13 14 15 16 NOISE GATE (variation, insertion block) No.
Effect Parameter List/Effektparameterliste/Liste des paramètres d'effet de voix WAH+DIST+DELAY (variation, Insertion1-4 block) WAH+OVERDRIVE+DELAY (variation, Insertion1-4 block) No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Display 0.1~1.4860s -63~+63 0~127 0~127 0~127 -12~+12dB -12~+12dB Value 1-14860 1-127 0-127 0-127 0-127 52-76 52-76 Dry/Wet D63>W ~ D=W ~ D
Effect Data Value Assign Table Effect Data Value Assign Table/Effektdatenwert- ZuordZuordnungstabelle/Table d'affectation des valeurs pour les données d'effets Table #1 LFO Frequency Data Value Data Value Data Value Data Value 0 0.00 32 1.35 64 2.69 96 8.41 1 0.04 33 1.39 65 2.78 97 8.75 2 0.08 34 1.43 66 2.86 98 9.08 3 0.13 35 1.47 67 2.94 99 9.42 4 0.17 36 1.51 68 3.03 100 9.76 5 0.21 37 1.56 69 3.11 101 10.1 6 0.25 38 1.60 70 3.20 102 10.8 7 0.29 39 1.64 71 3.28 103 11.4 8 0.34 40 1.68 72 3.37 104 12.
MIDI Data Format MIDI Data Format/MIDI-Datenformat/Format de données Many MIDI messages listed in the MIDI Data Format are expressed in decimal numbers, binary numbers and hexadecimal numbers. Hexadecimal numbers may include the letter “H” as a suffix. Also, “n” can freely be defined as any whole number. To enter data/values, refer to the table below.
MIDI Channel/Mode/Realtime Messages/ Kanal / Modus / Realtime-Meldungen/ Messages canal/de mode/temps réel o : available Status byte MIDI Events Status 1st Data byte Data (HEX) Parameter Data Key Off Key On 8nH 9nH kk kk Key no. (0~127) Key no. (0~127) vv vv Control Change BnH 0 64 126 127 0~ 112~ 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127 (00H) (40H) (7EH) (7FH) (0...) (70H...) (...7FH) (...7FH) (...7FH) (...7FH) (...7FH) (...7FH) (...
MIDI Data Format/MIDI-Datenformat/Format de données MIDI MIDI Data Format/MIDI-Datenformat/Format de données MIDI
NRPN o : available NRPN DATA ENTRY Recognized Parameter MSB LSB MSB LSB XG/GM Keyboard R1 R2 01H 08H mmH -Vibrato Rate o x o o 01H 09H mmH -Vibrato Depth o x o o 01H 0AH mmH -Vibrato Delay o x x x 01H 20H mmH -Filter Cutoff Frequency o x x x 01H 21H mmH -Filter Resonance o x x x 01H 24H mmH -HPF Cutoff Frequency x x x x 01H 30H mmH -EQ BASS o x x x 01H 31H mmH -EQ TREBLE o x x x 0MIDI Data Format/MIDI-Datenformat/Format de données MIDI System Exclusive Messages/ Systemexklusive Meldungen/ Messages exclusifs au système System Exclusive Messages Accompaniment Control Section Control Tempo Control Chord Control Data Format F0H 43H 7EH 00H 11110000 01000011 01111110 00000000 0sssssss Recognized o ss dd F7H F0 = Exclusive status 43 = YAMAHA ID 7E = Style 00 = ss = Switch No.
MIDI Data Format/MIDI-Datenformat/Format de données MIDI Type2 (tt=03) (Receive only) 11110000 F0 = Exclusive status 01000011 43 = YAMAHA ID 01111110 7E = 00000011 03 = type 2(tt) 0ddddddd dd = note1 0ddddddd dd = note2 0ddddddd dd = note3 : : : 0ddddddd dd = ...
MIDI Data Format/MIDI-Datenformat/Format de données MIDI Parameter Request Dump Request F0H 43H 3nH 4CH 11110000 01000011 0011nnnn 01001100 0hhhhhhh 0mmmmmmm 0lllllll 11110111 F0H 43H 2nH 4CH 11110000 01000011 0010nnnn 01001100 0hhhhhhh 0mmmmmmm 0lllllll 11110111 hh mm l l F7H F0 = Exclusive status 43 = YAMAHA ID 3n = Device Number n=always 0(when transmit), n=0-F(when recieve) 4C = Model ID hh = Address High mm = Address Mid ll = Address Low F7 = End of Exclusive hh mm l l F7H F0 = Exclusive status 43 =
MIDI Data Format/MIDI-Datenformat/Format de données MIDI System Exclusive Messages Special Operators (Vocal Harmony Additional Parameters) MIDI Event Vocal Harmony Pitch to Note ON/OFF Data Format F0H 43H 73H 01H 00000000 01010000 00000000 0sssssss Vocal Harmony Pitch to Note Part F0H 43H 73H 01H 00000000 01010000 00000001 0sssssss Vocal Harmony Vocoder Part (Harmony Part(Panel)) F0H 43H 73H 01H 00000000 01010000 00010000 0sssssss Vocal Harmony Additional Reverb Depth F0H 43H 73H 01H 00000000 0101000
MIDI Data Format/MIDI-Datenformat/Format de données MIDI MIDI Parameter Change Table/ Änderungstabelle der MIDI-Parameter/ Tableau des changements de paramètres MIDI
MIDI PARAMETER CHANGE TABLE (SYSTEM) 0 Address (H) 0 0 1 2 3 4 5 6 7D 7E 7F TOTAL SIZE Size (H) 4 Data (H) 0000 07FF Parameter MASTER TUNE o 1 1 1 00 - 7F MASTER VOLUME (MASTER ATTENUATOR) TRANSPOSE DRUM SETUP RESET XG SYSTEM ON ALL PARAMETER RESET o x o o o o 28 - 58 n 0 0 Recognized Description Default value(H) 00 04MIDI Data Format/MIDI-Datenformat/Format de données MIDI 2 40 2 42 2 44 2 46 2 48 2 4A 2 4C 2 4E 2 50 2 52 2 54 2 56 57 58 59 5A 5B 1 1 1 1 1 1 5C 5D 5E 5F 60 TOTAL SIZE 1 1 1 1 1 21 2 1 1 70 71 72 73 74 75 TOTAL SIZE 1 1 1 1 1 1 6 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 01-7F 00-7F 00-7F 00-01 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F VARIATION TYPE MSB VARIATION TYPE LSB VARI
MIDI Data Format/MIDI-Datenformat/Format de données MIDI 6 1 00-7F INSERTION EFFECT n PARAMETER5 o Refer to the MIDI EFFECT PARAMETER LIST 7 1 00-7F INSERTION EFFECT n PARAMETER6 o Refer to the MIDI EFFECT PARAMETER LIST 8 1 00-7F INSERTION EFFECT n PARAMETER7 o Refer to the MIDI EFFECT PARAMETER LIST 9 1 00-7F INSERTION EFFECT n PARAMETER8 o Refer to the MIDI EFFECT PARAMETER LIST 0A 1 00-7F INSERTION EFFECT n PARAMETER9 o Refer to the MIDI EFFECT PARAMETER LIST 0B 1 00-7F
MIDI Data Format/MIDI-Datenformat/Format de données MIDI
MIDI PARAMETER CHANGE TABLE (SPECIAL EFFECT) Address (H) 00 00 02 1 Data (H) 00 - 7F 00 - 7F 00 - 7F 03 1 00 - 7F INSERTION EFFECT PARAMETER2 o Refer to the XG EFFECT PARAMETER LIST 04 1 00 - 7F INSERTION EFFECT PARAMETER3 o Refer to the XG EFFECT PARAMETER LIST 05 1 00 - 7F INSERTION EFFECT PARAMETER4 o Refer to the XG EFFECT PARAMETER LIST 06 1 00 - 7F INSERTION EFFECT PARAMETER5 o Refer to the XG EFFECT PARAMETMIDI Data Format/MIDI-Datenformat/Format de données MIDI nn 6 1 00 - 02 SAME NOTE NUMBER KEY ON ASSIGN o x o o o o o nn 7 1 00 - 05 PART MODE o x x x x x x nn nn nn 8 9 0A 1 2 28 - 58 00 - FF NOTE SHIFT DETUNE o o x x o o o o o o o o o o nn nn nn nn 0B 0C 0D 0E 1 1 1 1 00 - 7F 00 - 7F 00 - 7F 00 - 7F VOLUME VELOCITY SENSE DEPTH VELOCITY SENSE OFFSET PAN o o o o x x x x o o o o o o o o o o o o o o o o o o o o nn nn nn nn nn nn 0F 10 11 12 13 14 1 1 1 1 1 1 0
MIDI Data Format/MIDI-Datenformat/Format de données MIDI nn nn nn nn nn nn 4D 4E 4F 50 51 52 1 1 1 1 1 1 CAT CAT CAT CAT CAT CAT PITCH CONTROL FILTER CONTROL AMPLITUDE CONTROL LFO PMOD DEPTH LFO FMOD DEPTH LFO AMOD DEPTH o o o o o o x x x x x x o o o o o o o o o o o o o o o o o o o o o o o o x x x x x x nn nn nn nn nn nn 53 54 55 56 57 58 1 1 1 1 1 1 PAT PAT PAT PAT PAT PAT PITCH CONTROL FILTER CONTROL AMPLITUDE CONTROL LFO PMOD DEPTH LFO FMOD DEPTH LFO AMOD DEPTH x x x x x x x x x x x x
MIDI Data Format/MIDI-Datenformat/Format de données MIDI
MIDI PARAMETER CHANGE TABLE (A/D PART) Address (H) nn 0 1 2 3 4 Size (H) 1 1 1 1 1 5 6 7 8 9 0A 0B 0C 0D 0E 0F 10 11 12 13 14 TOTAL SIZE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 15 10 Address (H) nn 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 40 10 Size (H) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Data (H) 00 - 01 00 - 7F 00 - 7F 00 - 7F 00 1F, 7F 00 - 7F 01 - 7F 00 - 7F 00 - 7F 00 - 7F 00 - 7F Data (H) 00 - 01 00 - 01 00 - 01 00 - 01 00MIDI Data Format/MIDI-Datenformat/Format de données MIDI 11 00 nn TOTAL SIZE 64 64 00-01 A/D SETUP x 12 1 00,08, 28-2D OUTPUT SELECT x nn 10 — 0:stereo out,8:indiv1+2 40:indiv1,41:indiv2, 0 Description Default -64 - +63 -64 - +63[cent] 0 - 127 0:OFF 1 - 127 0:random 1:L63 : 64:C(center) : 127:R63 0 - 127 0 - 127 0 - 127 0:SINGLE 1:MULTI OFF/ON OFF/ON -64 - +63 -64 - +63 -64 - +63 -64 - +63 -64 - +63 40 40 depend on the note depend on the note TOTAL SIZE 1 nn: A/D Part number( 0 - 63 )
617 Functions of the MIDI B Port when Connected to the MFC10/ Funktionen des MIDI B Ports bei Verbindung mit dem MFC10/ Fonctions du port MIDI B lors de la connexion au MFC10 The MIDI B port can also be used for operation with the MFC10 MIDI Foot Controller.
MIDI B IN MIDI Events Status byte Status Key Off 8nH Data (n:channel no.) 1st Data byte (HEX) Parameter kk Key no. (0~127) vv Key no.MIDI Implementation Chart MIDI Implementation Chart/MIDI-Implementierungstabelle/ Chart/MIDI-Implementierungstabelle/ YAMAHA [ Professional Workstation ] Model 9000Pro MIDI Implementation Chart Transmitted Date:9-SEP-1999 Version : 1.0 Recognized Remarks Function...
Feuille d’implémentation MIDI *1 The tracks for each channel can be selected on the panel. See page 175 for more information. *1 Les pistes de chaque canal peuvent être sélectionnées sur le panneau. Pour plus d'informations, voir page 175. *2 The tone generator normally functions as a 16-channel multi-timbre tone generator in response to MIDI input. MIDI messages therefore do not normally affect the panel voices or other panel settings.
Specifications Specifications/Technische Daten/Spécifications Keyboard: 76 Keys (E0 ~ G6) Weighted with Touch Response (Initial/After) Polyphony: 126 Notes max Voices: Preset Custom Organ Flute 848 32 20 342 Voices + 480 XG Voices + 24 Drum Kits + 2 SFX Kits User programmable 10 Preset + 10 User, 9 Footages; with Modeling Technology 3 PART 1 PART RIGHT1, RIGHT2, RIGHT3 Orchestration: Right Left Plug-In System: Slots Supported Boards Edit 2 PLG100-DX, PLG100-VL, PLG150-AN, PLG150-PF, PLG150-DX, PL
Specifications/Technische Daten/Spécifications Registration Memeory: 512 8 Switches x 64 Banks, Freeze function 5 languages English, German, French, Spanish, Italian Back Lit Graphic LCD 240 x 320 Dots, video out capability Language: Display: Disk: Floppy Disk Drive Built-in Hard Disk 3.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
For details of products, please contact your nearest Yamaha or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A.
Yamaha PK CLUB (Portable Keyboard Home Page) http://www.yamaha.co.jp/english/product/pk Yamaha Manual Library (English versions only) http://www2.yamaha.co.jp/manual/english/ M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2000 Yamaha Corporation V619160 009POCP1.