Owner`s manual

242 Chapter 19MIDI
03D—Owner’s Manual
Bulk Dump
From the Bulk page, 03D data can be dumped to and from other MIDI devices, such as
a MIDI data filer, controlling computer, or another 03D. This can be used to backup
03D data, or transfer data between 03Ds.
1. Use the [MIDI] button to locate the Bulk page shown below.
2. Use the cursor buttons to select a data type switch, and then press the
[ENTER] button.
If you are using a mouse, simply click the data type switch.
3. Use the cursor buttons to select the parameter box adjacent to the
selected data type, and then use the PARAMETER wheel to select indi-
vidual memories and programs.
4. To transmit or request all data, select the ALL switch.
ALL allows you to transmit or request the data of all 10 categories.
5. Use the cursor buttons to select the REQUEST or TRANSMIT switch, and
then press the [ENTER] button.
When REQUEST is pressed, the 03D transmits a MIDI Bulk Dump Request message.
The receiving device then transmits the requested Bulk Dump data to the 03D. When
TRANSMIT is pressed, the 03D transmits the specified data.
TRANSMIT INTERVAL—This parameter specifies the interval between data blocks
during Bulk Dump transmission. MIDI devices with a relatively small data buffer can
easily be overloaded with MIDI data. Setting an interval of, say, 300 ms allows a slower
device to process the received MIDI data correctly. An interval setting of 0 can be used
when transferring Bulk Dump data between 03Ds.
Data Type Range Description
SETUP MEM.
Various settings
PGM. TABLE
PGM Asgn. page settings (scene memory
to Program Change assignment table)
CTL. TABLE
CTL Asgn. page settings (parameter to
Control Change assignment table)
SCENE MEM.
150, EDIT BUFFER, ALL Scene memory data
EQ LIBRARY
4180, ALL EQ library user programs
DYN. LIBRARY
4180, ALL Dynamics library user programs
EFF. LIBRARY
6596, ALL Effects library user programs
CH LIBRARY
250, ALL Channel library user programs
AUTOMIX
14, CURRENT AUTO, ALL Automix data
MIDI REMOTE
14 MIDI remote data