User`s guide

92 Chapter 10: Other Functions
ProMix 01 User’s Guide
1. Power OFF ProMix 01.
2. Press and hold down
[STORE] and [INC+].
3. Power ON ProMix 01.
The message “Initializing
Memory” appears.
4. When the “Initializing
Memory” message disap-
pears, release the buttons.
When the faders return to
their minimum positions, ini-
tialization is complete.
ProMix 01 Initialization
This function allows you to reset all ProMix 01 mix settings, mix
scenes, user effects programs, user EQ programs, and user dynamics
programs to their initial settings (i.e. their factory settings).
Initialization consists of:
• Clearing all user RAM areas: mix scenes, user effects programs,
user EQ programs, and user dynamics programs.
• Initializing the Edit Buffer (i.e. all mix settings).
• Initializing the Mix Scene to Program Change table.
• Initializing the Control Change to Parameter Assignment table.
• Copying mix scene 00 to mix scenes 1 through 50.
• Initializing the I/O ports.
• Calibrating the faders (don’t worry about the noise).
• Refreshing the LCD.
• Resetting.
Fader Calibration
If ProMix 01 is not used for some time, is moved to a new location,
or the faders are obstructed in some way, fader movements may
become irregular. In this case the faders need calibrating. This calcu-
lates the torque required by each fader motor to drive its fader accu-
rately and smoothly. Fader calibration takes about 30 seconds, and
the message “Calibrating Faders” is shown while it’s in progress.
Note: If you want to reset just the mix settings, recall mix scene 00
instead. See “Mix Scene 00” on page 62.
Note: Do not touch or obstruct the faders while calibration is in progress.
If you do so accidentally, calibrate the faders again.
1. Power OFF ProMix 01.
2. Press and hold down
[ENTER].
3. Power ON ProMix 01.
The faders are calibrated.
When the faders return to
their previous positions, cali-
bration is complete.