User`s guide

Stereo Input Channel and Sends 31
ProMix 01 User’s Guide
Stereo Input Channel and Sends
Input channels 1 through 16 handle only a single signal. The stereo
input channel, however, handles two signals: left and right. So before
feeding the stereo input signal to the SEND1, SEND2, SEND3, and
SEND4 send level controls, the left and right signals are summed to
form a mono L+R mix.
When SEND3 and SEND4 are used as a stereo pair, however, only the
stereo input signals feeding SEND1 and SEND2 are summed. For
SEND3-4, the left signal is fed to SEND3 and the right signal is fed to
SEND4. The stereo input-to-SEND3-4 left and right signals can be
balanced using the ST IN balance control on the SEND3-4 pan dis-
play. See “SEND3-4 Stereo Pair” on page 46 for more details about the
SEND3-4 stereo pair.
Applying Effects
There are three steps to applying effects:
1. Send a channel signal via SEND1 or SEND2 (set the level).
2. Return the processed signal via RTN1 or RTN2 (EQ, level, pan).
3. Set up Effect1 or Effect2 (recall, edit, and store).
These steps are explained fully in the following sections.