User`s guide

Preset Effects Program Parameters 37
ProMix 01 User’s Guide
Preset Effects Program Parameters
Program 1—REVERB HALL 1
Simulates the reverb of a large concert hall.
Parameter Setting Range Description
Rev.time 2.8s 0.3–30.0s Reverb time.
High Ratio 0.8 0.1–1.0 High frequency decay ratio.
Diffusion 6 0–10 Reverb diffusion.
Ini.Dly 40.0ms 0.1–200.0ms Initial delay between the direct sound and early reverb reflections.
LPF 7.0kHz 1.0kHz–16.0kHz, THRU Low pass filter cutoff frequency.
HPF THRU THRU, 32Hz–8kHz High pass filter cutoff frequency.
Program 2—REVERB HALL 2
This is a variation of program 1.
Parameter Setting Range Description
Rev.time 3.2s
Same as program 1 Same as program 1
High Ratio 0.7
Diffusion 8
Ini.Dly 38.0ms
LPF 6.3kHz
HPF THRU
Program 3—REVERB ROOM 1
Simulates the reverb of a concrete-walled room that produces a lot of echo. Use it to add a live atmosphere to drum sounds.
Parameter Setting Range Description
Rev.time 1.4s
Same as program 1 Same as program 1
High Ratio 0.8
Diffusion 7
Ini.Dly 5.0ms
LPF THRU
HPF 280Hz
Program 4—REVERB ROOM 2
This is a variation of program 3.
Parameter Setting Range Description
Rev.time 1.8s
Same as program 1 Same as program 1
High Ratio 0.6
Diffusion 6
Ini.Dly 17.0ms
LPF 9.0kHz
HPF 80Hz