User`s guide

Preset Effects Program Parameters
39
ProMix 01 User’s Guide
Program 9—REV LIVE ROOM 1
Simulates the reverb of a live room. Reverb reflections are stronger than those of REVERB ROOM.
Parameter Setting Range Description
Rev.time 2.4s
Same as program 1 Same as program 1
High Ratio 0.8
Diffusion 7
Ini.Dly 0.1ms
LPF 7.0kHz
HPF THRU
Program 10—REV LIVE ROOM 2
A variation of program 9.
Parameter Setting Range Description
Rev.time 2.2s
Same as program 1 Same as program 1
High Ratio 0.5
Diffusion 6
Ini.Dly 12.0ms
LPF 4.0kHz
HPF THRU
Program 11—REVERB VOCAL
A reverb simulation ideal for vocals and chorus.
Parameter Setting Range Description
Rev.time 1.9s
Same as program 1 Same as program 1
High Ratio 0.5
Diffusion 6
Ini.Dly 16.0ms
LPF 12.0kHz
HPF 100Hz
Program 12—CHORUS->REVERB
Stereo chorus followed by reverb.
Parameter Setting Range Description
Mod.Freq 0.8Hz 0.1–20.0Hz Modulation speed.
Mod.Depth 40% 0–100% Modulation depth. The amount of modulation.
Mod.Dly 1.3ms 0.0–24.0ms Modulation delay. The delay time before modulation starts.
Rev.time 2.4s 0.3–30.0s Reverb time.
High Ratio 0.7 0.1–1.0 High-frequency decay ratio.
Diffusion 7 0–10 Reverb diffusion.
Ini.Dly 30.0ms 0.1–139.0ms Initial delay between the direct sound and early reverb reflections.
LPF 6.3kHz 1.0kHz–16.0kHz, THRU Low pass filter cutoff frequency.
HPF THRU THRU, 32Hz–8kHz High pass filter cutoff frequency.
Rev.Depth 24% 0–100% Reverb depth. The amount of reverb.
This document was created with FrameMaker 4.0.4