User`s guide

Chapter 5: CUE

ProMix 01 User’s Guide

About CUE

ProMix 01 CUE provides comprehensive monitoring of virtually all

inputs and outputs. The CUE signal is output to the MONITOR

OUTPUT and PHONES. Output levels are controlled using the

MONITOR OUT LEVEL control and PHONES LEVEL control,

respectively.

CUE Modes

There are three CUE modes: MIX, LAST CUE, and ST FIX. The fol-

lowing table shows how they work in relation to the LCD functions.

MIX

— this mode can be used only when the CUE LCD function is

selected. When this mode is selected, the message “Select a channel

to CUE” appears and the selected channel’s [SEL] button LED goes

OFF. The [SEL] buttons can then be used to add channels to the CUE

mix. Stereo-pair channels are cued together. This mode is equivalent

to the CUE function on a conventional mixer.

LAST CUE

— in this mode, the currently selected channel is cued.

Stereo-pair channels are cued together. This mode is active when LCD

functions other than GROUP are selected.

ST FIX

— in this mode, CUE follows the main stereo output (i.e. it’s

ﬁxed to ST OUT). It is not affected when either the CUE or GROUP

LCD function is selected.

Group CUE

When the GROUP LCD function is selected, you can listen to a

post-fader mix of all channels in the selected group via CUE. This

makes it easy to balance faders in a group. It works only when the CUE

mode is set to MIX or LAST CUE, not when it’s set to ST FIX. When

another LCD function is selected, CUE returns to normal operation.

CUE MODE

Selected LCD Function

CUE GROUP Others

MIX

GROUP LAST CUE

LAST CUE

ST FIX