User`s guide

Setting the CUE Mode

ProMix 01 User’s Guide

Setting the CUE Mode

CUE modes are set on the CUE LCD function, shown below. The

name of the current CUE mode is highlighted. The PARAMETER

wheel is used to select modes. When another mode is selected, its

name ﬂashes. If it is activated by pressing [ENTER], it stops ﬂashing,

appears highlighted, and becomes the current CUE mode.

CUE Signal Sources

The following table shows where the various CUE signals are sourced.

n/a: not applicable.

CUE/2TR IN Switch

This switch determines the signal source for the monitor output and

phones. CUE selects the CUE bus; 2TR IN selects the 2 TR IN inputs.

CUE is used for normal mixing operations. 2TR IN, for 2-track play-

back and conﬁdence monitoring.

Channels

CUE Modes

GROUP LCD Function

MIX & LAST CUE

CH1–16 mono

Mono/pre-fader Mono/post-fader, pre-pan

CH1–16 stereo pair

Mono/pre-fader (L+R mix)

Mono/post-fader, pre-pan

(L+R mix)

Stereo input

Stereo/pre-fader Stereo/post-fader, pre-pan

RTN1, RTN2

Stereo/pre-fader n/a

SEND3, SEND4

Mono/pre-fader n/a

SEND3-4

Stereo/pre-fader n/a

Stereo output

Stereo/pre-fader n/a

1. Press [CUE].

The CUE LCD function

appears.

2. Use the PARAMETER wheel

to select a CUE mode.

3. Press [ENTER] to activate

the selected mode.

The name of the CUE mode

appears highlighted.