User`s guide

74 Chapter 8: Dynamics Processors

ProMix 01 User’s Guide

1. Press [UTILITY].

The UTILITY menu appears.

2. Select OUTPUT COMP

PATCH POINT and press

[ENTER].

The OUTPUT COMP PATCH

POINT LCD function appears.

3. Use the cursor buttons to

select parameters and the

[ENTER] button or PARAM-

ETER wheel to set them.

4. To exit this function and

return to the UTILITY menu,

select EXIT and press

[ENTER], or just press [UTIL-

ITY].

The UTILITY menu reappears.

Pre-Fader or Post-Fader Patches

SEND3, SEND4, and stereo output dynamics processor patch points

can be conﬁgured pre-fader or post-fader. These settings are made on

the OUTPUT COMP PATCH POINT LCD function, shown below.

Initially, they are all conﬁgured post-fader.