User`s guide

Bulk Dump/Request 85
ProMix 01 User’s Guide
1. Press [MIDI].
The MIDI menu appears.
2. Select BULK DUMP
REQUEST and press
[ENTER].
The BULK DUMP REQUEST
LCD function appears.
3. Select MODE and press
[ENTER] or use the PARAM-
ETER wheel to select BULK
DUMP or BULK REQUEST.
4. Use the cursor buttons to
select a data type. Use the
PARAMETER wheel to select
mix scenes.
5. Press [ENTER] to execute
the dump or request.
A message appears showing
dump or request status.
6. To exit this function and
return to the MIDI menu,
select EXIT and press
[ENTER], or just press
[MIDI].
The MIDI menu reappears.
!
Remember to set the relevant
BULK parameters on the MIDI
SETUP LCD function before try-
ing to transmit or receive Bulk
Dump data.
Bulk Dump/Request
The BULK DUMP/REQUEST LCD function has two operating
modes: Bulk Dump and Bulk Request. Bulk Dump outputs the
selected data as MIDI Bulk Dump data. This is used to store
ProMix 01 data to a controlling computer, MIDI sequencer, or MIDI
data filer. Bulk Request, on the other hand, outputs a Bulk Request
message requesting the selected data. The controlling computer that
receives this message responds by transmitting the requested data.
The Dump and Request functions can also be used to exchange data
between ProMix 01s in a multiple system.
Shown below is the BULK DUMP/REQUEST LCD function.
The parameters are:
MODE — this determines the mode: Bulk Dump or Bulk Request.
When Bulk Dump is selected, the selected data is output as MIDI Bulk
Dump. When Bulk Request is selected, a Bulk Request message
requesting the selected data is output.
ALL — this is all ProMix 01 data.
SCENE — this is mix scene data. You can select all mix scenes
(01–50), just one (10–10), or a range (05–15).
EDIT BUFFER — this is the Edit Buffer data. For more details about
this and other data types, see “Data Types” on page 98.
SETUP MEMORY — this is the Setup Memory data.
CONTROL — this is the Control Change to Parameter Assignment
table data.
PROGRAM — this is the Mix Scene to Program Change Assignment
table data.
INTERVAL TIME — this determines the interval between MIDI data
blocks. MIDI devices with a relatively small MIDI buffer sometimes
require longer intervals. Refer to your MIDI device’s user manuals to
see what interval is recommended. For data transfer between
ProMix 01s, use the 300ms setting.
While Bulk Dump or Bulk Request is in progress, the name of the data
being output or requested is shown at the bottom of the display.
To cancel Bulk Dump, press a cursor button or select another LCD
function.