User Manual

32
Here’s how to create a controller file for KIOSK installed on the
actual operating terminal.
For details on creating a controller file for ProVisionaire Touch
KIOSK and sending it to the iPad, refer to the “Export Controller
File” dialog box.
1. In the “Controllers” area, select the controller for
which you want to create a controller file.
2. On the tool bar, click the [Export] button .
The “Export Controller File” dialog box opens.
3. Assign a file name, and click [Save].
The controller file is saved.
Here’s how to make KIOSK automatically start up and open a spe-
cific controller file (ypvc) when Windows starts on the operating ter-
minal.
For details on settings in ProVisionaire Touch KIOSK, refer to “Pro-
Visionaire Touch Setup Guide.” You can download the setup guide
by searching from the following URL.
https://download.yamaha.com/
1. Start the operating terminal.
2. Install KIOSK.
3. Place the controller file in the following folder.
C:\Users\xxxx\AppData\Roaming\Microsoft\
Windows\Start Menu\Programs\Startup
xxxx is the user name when logging in to the computer.
In some cases, folder names might be shown translated into a differ-
ent language.
If the AppData folder is not shown in Explorer, enter the folder name
directly into the address bar.
4. Restart the computer.
When you log in, KIOSK starts and the controller file opens. The first
time, the “Setup” dialog box will open; select the interface that is
connected to the same network as the device to be controlled, and
click the [OK] button.
This completes basic operations.
Creating a controller file Making KIOSK start automatically