User Manual

66
 Indicator
There is only one type of indicator widget.
 Indicator properties
Here we explain the parameters that are shown in the “Properties”
area when the focus is on an indicator. Depending on the settings,
some parameters are not shown.
Areas whose Value field is darkly shaded cannot be edited.
Items with an “*” in Property are style-related information.
Property Value
[General] Overall properties of the widget
[Name] The name of the widget. If you place the
widget first and assign a parameter
later, you can enter a name here to indi-
cate the parameter that you intend to
assign.
[Type] The type of widget.
[Visible] Selects whether the widget is visible or
invisible in control mode.
[Control] Overall information on what is con-
trolled
[Model] The model name of the device.
[Device Identifier] The identifier of the device. The unit ID
or the IP address is shown.
[Parameter
Address]
The parameter name assigned to the
widget.
[Indication
Threshold]
Specifies the threshold value at which
on/off is switched.
[Analog Input
Port] etc.
The parameter’s channel number, etc.
The name differs depending on the
parameter that is assigned.
[Position/Appear-
ance]
Overall appearance of the widget
[X] Specifies the horizontal distance from
the top left of the screen and the top left
of the widget.
[Y] Specifies the vertical distance from the
top left of the screen and the top left of
the widget.
[Width] Specifies the width of the widget.
[Height] Specifies the height of the widget.
[Lock Aspect
Ratio] *
Selects whether the width/height ratio
of the widget will be fixed.
[Shape] * Selects the shape of the widget.
[Corner] * Specifies the roundness of the widget’s
corners.
[Border Style] * Selects the type of border for the wid-
get.
Property Value