User Manual
Table Of Contents
- Introduction
- Audio Components
- The Difference Between Mono, Stereo, and Multi
- How to Control Control Signals
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Control (AGC)
- Combiner
- Room Combiner/Room Combiner plus Automixer
- ■ “Room Combiner” component editor/”Room Combiner plus Automixer” component editor
- ■ “Room Combiner” component editor/”Room Combiner plus Automixer” component editor
- Combiner parameter setting window (Room Combiner)
- Combiner parameter setting window (Room Combiner plus Automixer)
- Control
- Control
- Dugan Automixer window (Room Combiner plus Automixer)
- Room Combiner/Room Combiner plus Automixer
- DCA
- Delay
- Dynamics
- REV-X
- EQ
- Fader
- Feedback Suppressor
- Filter
- Input/Output
- Meter
- Mixer
- Oscillator
- Polarity
- Probe
- Router
- Source Selector
- Speaker Processor
- Control Components
- Control Methods for Control Components
- Trigger
- Button (Normalized Value)
- Button (Value)
- Radio Button (Normalized Value)
- Radio Button (Value)
- Fader (Normalized Value)
- Fader (Value)
- Processing
- Logic (Normalized Value)
- NOT (Normalized Value)
- Flip-Flop (Normalized Value)
- Invert (Normalized Value)
- Compare (Normalized Value)
- Difference (Normalized Value)
- Max/Min (Normalized Value)
- Negate (Value)
- Compare (Value)
- Multi Compare (Value)
- Difference (Value)
- Max/Min (Value)
- Delay
- External Events
- Suspend
- Router
- Other
- GPI In
- GPI Out
ProVisionaire Design DME7 Component Guide
129
■ ”Radio Button” component editor (dB)
① When the button is switched on, the value set in ② is output.
② −∞ to 10 dB
③ Displays the channel number for which the button has turned on. If all of them are off, "0"
will be displayed.
Parameter types of the input/output values for each Port
Operation Output Value
Input Port Name
Trigger/
Processing
Output Port Name Type Range
●
CH
(1,2..)
Trigger:
Radio Button
●
CH
(1,2..) Value Num OFF:0 On:1
-
●
Out Value
dB −∞–10.00
Num -20000–20000
●
Sel
●
Sel Value Num 1-256
* Input Port: It is also possible to control the ON button by inputting OFF:0 and ON:1 in the
Value (Num) data type for CH.
* Input Port: It is also possible to control the ON button by inputting the CH number in the
Value (Num) data type for Sel.