User Manual
Table Of Contents
- Introduction
- Audio Components
- The Difference Between Mono, Stereo, and Multi
- How to Control Control Signals
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Control (AGC)
- Combiner
- Room Combiner/Room Combiner plus Automixer
- ■ “Room Combiner” component editor/”Room Combiner plus Automixer” component editor
- ■ “Room Combiner” component editor/”Room Combiner plus Automixer” component editor
- Combiner parameter setting window (Room Combiner)
- Combiner parameter setting window (Room Combiner plus Automixer)
- Control
- Control
- Dugan Automixer window (Room Combiner plus Automixer)
- Room Combiner/Room Combiner plus Automixer
- DCA
- Delay
- Dynamics
- REV-X
- EQ
- Fader
- Feedback Suppressor
- Filter
- Input/Output
- Meter
- Mixer
- Oscillator
- Polarity
- Probe
- Router
- Source Selector
- Speaker Processor
- Control Components
- Control Methods for Control Components
- Trigger
- Button (Normalized Value)
- Button (Value)
- Radio Button (Normalized Value)
- Radio Button (Value)
- Fader (Normalized Value)
- Fader (Value)
- Processing
- Logic (Normalized Value)
- NOT (Normalized Value)
- Flip-Flop (Normalized Value)
- Invert (Normalized Value)
- Compare (Normalized Value)
- Difference (Normalized Value)
- Max/Min (Normalized Value)
- Negate (Value)
- Compare (Value)
- Multi Compare (Value)
- Difference (Value)
- Max/Min (Value)
- Delay
- External Events
- Suspend
- Router
- Other
- GPI In
- GPI Out
ProVisionaire Design DME7 Component Guide
56
n Reverberation images
These images represent the high-range (10 kHz), mid-range (1 kHz), and low-range (100
Hz) reverberation. These images change shape depending on the parameter values. The
vertical axis represents the level; the horizontal axis represents reverb time; the shape
represents the envelope.
o Reverb time curve
This curve represents the high-range (10 kHz), mid-range (1 kHz), and low-range (100
Hz) reverb time. The curve changes depending on the Reverb Time, Hi Ratio, and Lo
Ratio parameter values.
p Zoom
This field indicates the time duration (in seconds) as displayed by the time axis
(horizontal axis).
q Zoom Out button
Increases the time value (in seconds) as displayed by the time axis (horizontal axis). As a
result, the display zooms out on the horizontal axis.
r Zoom In button
Decreases the time value (in seconds) as displayed by the time axis (horizontal axis). As
a result, the display zooms in on the horizontal axis.
s [DRY/ WE T] knob
This control enables you to adjust the mix balance of the dry and wet (effect) sounds.
When the balance is 0%, only the dry sound is output. When the balance is 100%, only
the wet sound is output.
Control
Parameter types of the input/output values for each Port
Input Value
Control Parameter Output Value
Type Range
Input Port Name Parameter Range
Output Port Name Type Range
Value Num 0,1
●
On OFF:0, ON:1
●
On Value Num
OFF:0,
ON:1