User Manual
Table Of Contents
- Introduction
- Audio Components
- The Difference Between Mono, Stereo, and Multi
- How to Control Control Signals
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Control (AGC)
- Combiner
- Room Combiner/Room Combiner plus Automixer
- ■ “Room Combiner” component editor/”Room Combiner plus Automixer” component editor
- ■ “Room Combiner” component editor/”Room Combiner plus Automixer” component editor
- Combiner parameter setting window (Room Combiner)
- Combiner parameter setting window (Room Combiner plus Automixer)
- Control
- Control
- Dugan Automixer window (Room Combiner plus Automixer)
- Room Combiner/Room Combiner plus Automixer
- DCA
- Delay
- Dynamics
- REV-X
- EQ
- Fader
- Feedback Suppressor
- Filter
- Input/Output
- Meter
- Mixer
- Oscillator
- Polarity
- Probe
- Router
- Source Selector
- Speaker Processor
- Control Components
- Control Methods for Control Components
- Trigger
- Button (Normalized Value)
- Button (Value)
- Radio Button (Normalized Value)
- Radio Button (Value)
- Fader (Normalized Value)
- Fader (Value)
- Processing
- Logic (Normalized Value)
- NOT (Normalized Value)
- Flip-Flop (Normalized Value)
- Invert (Normalized Value)
- Compare (Normalized Value)
- Difference (Normalized Value)
- Max/Min (Normalized Value)
- Negate (Value)
- Compare (Value)
- Multi Compare (Value)
- Difference (Value)
- Max/Min (Value)
- Delay
- External Events
- Suspend
- Router
- Other
- GPI In
- GPI Out
ProVisionaire Design DME7 Component Guide
97
• The automix gain value of that channel decreases, and the value of other channels
increases.
• If people speak simultaneously into multiple mics, it will be more difficult to differentiate
them from the other mics.
d [group] button
Selects the group to which each channel belongs. Click the button to switch the group.
e [override] button
When the main control field’s [OVERRIDE] button is on, the setting of this button
determines whether the corresponding channel switches to “man” mode or “mute” mode.
• If you turn on the [OVERRIDE] button of the main control field when the [override] button
of the channel control field is on, the channel mode changes to “man.”
• If you turn on the [OVERRIDE] button of the main control field when the [override] button
of the channel control field is off, the channel mode changes to “mute.”
• When the [OVERRIDE] button of the main control field is turned off, that channel returns to
its previous mode.
f Input channel number
Indicates the input channel number.
g Port name
Shows or edits the port name. This is linked with the “Label” of the component’s ports.
h [man]/[auto]/[mute] buttons
These buttons toggle the channel between man/auto/mute.
man : The audio is passed through without modifying the gain. Select this mode if
singing into the mic.
auto : The automixer is turned on. Select this mode for conversation.
mute : The channel is muted.
Control
Parameter types of the input/output values for each Port
Input Value
Control Parameter Output Value
Type Range
Input Port Name Parameter Range
Output Port Name Type Range
Value Num 0,1
●
override Ch1 OFF:0, ON:1
●
override Ch1 Value Num
OFF:0,
ON:1
Value dB
−∞–
10.00
●
auto mix gain a −∞–10.00
●
auto mix gain a Value dB
−∞–
10.00
Normalized
0.00–
1.00
Value Num 0,1
●
group override a OFF:0, ON:1
●
group override a Value Num
OFF:0,
ON:1
- - -
OFF:0, ON:1
●
group mute a Value Num
OFF:0,
ON:1