User Manual

Notice: Do not turn off the power of the instrument or remove the USB memory during this operation.

Download the firmware

1) Download the Zip file to the computer.

2) Connect the USB memory to your computer.

3) Extract the *.prg file and copy it to the root directory of your USB memory.

Connect the USB memory to the instrument

Connect the USB memory containing the downloaded files into the USB TO DEVICE terminal of the

instrument.

Notice: Make sure that the USB memory is properly connected to the terminal.

Excessive force or incorrect insertion may damage the terminal.

Install the firmware

1) Hold down STYLE CONTROL [START/STOP] button on the panel and turn the power on

simultaneously.

[START/STOP] button Power on button

2) Keep holding down the [START/STOP] button until the following message appears:

3) When the following message appears after a few moments, press the [START/STOP] button.

System Booter ver.1.**

Now loading. Please wait a moment…

Firmware Installation Procedure

PAGE 1
Firmware Installation Procedure Notice: Do not turn off the power of the instrument or remove the USB memory during this operation. 1 Download the firmware 1) Download the Zip file to the computer. 2) Connect the USB memory to your computer. 3) Extract the *.prg file and copy it to the root directory of your USB memory. 2 Connect the USB memory to the instrument Connect the USB memory containing the downloaded files into the USB TO DEVICE terminal of the instrument.
PAGE 2
Program Installer ver.1.** To start installation, please press the [START/STOP] button. To delete the update program, please press the [BREAK] button. - Notice Do not turn off the power until all installations are finished. Copyright(C) 20** Yamaha Corporation 4) When the following message appears, press the [START/STOP] button to start firmware installation. A progress bar for installation will appear. Program Installer ver.1.** The update program is “ver.1.**”.
PAGE 3
Troubleshooting 1) The power supply was cut off or the USB memory was removed during operation. A complete reinstall is necessary. Perform the operation again from the beginning. 2) The installation cannot be executed and an error message appears in the display.