Manual

® DC(9-12V)IN Jack
The DC output cord from the optional
Yamaha РА-1/ PA-1 В/ РА-3/ РА-4/
PA-40 Power Adaptor should be
plugged in here when the PSR-8 is
powered from the AC mains supply
(refer to "Power Supply" on page 3 for
more details).
(Q) Gleichspannungsbuchse
(DC (9-12V) IN)
An diese Buchse wird das
Ausgangskabel des getrennt
erhältlichen Yamaha Netzadapters
PA-1/ PA-IB/ PA-3/ PA-^ PA-^
angeschlossen, wenn das PSR-8
über Netzstrom betrieben werden
soll. (Einzelheiten, siehe unter
"Stromversorgung auf Seite 3").
d2) Prisa d'entrée CC (DC (9-12V) IN)
Le cordon de sortie CC de
l'adaptateur secteur Yamaha PA-1/
PA-1 B/ PA-3/ PA-4/ PA-40 fourni doit
être branché à cette prise lorsque le
PSR-8 dort être alimenté par le
secteur (Pour plus de détails, voir
"Alimentation électrique" à la page 3).
® Toma de entrada de
alimentación exterior
(DC (9-12V) IN)
El cable de salida de CC del
adaptador de alimentación Yamaha
PA-1, PA-IB, PA-3, PA-4 o PA-^0
debe enchufarse a esta toma cuando
se desee alimentar el PSR-8 con la
red eléctrica de CA (consulte
"Alimentación" de la página 3 para
más detalles.
ENJOY THE
DEMONSTRATION
To give you an idea of the PSR-8’s
sophisticated capabilities, it is
programmed with a demonstration
sequence which play automatically while
demonstrating a number of the
instrument's voices.
1. Switch ON
Slide the POWER switch (pto the ON
position. The TEMPO light indicates
when the POWER is ON.
2. Set an Initial Volume Level
Slide the MASTER VOLUME control
(Dto a position about halfway
between the "MIN" and "MAX"
settings. You can set this control for
the most desirable volume level after
playback begins.
DEMO
WIEDERGABE
Um Ihnen eine Vorstellung von den
vielseitigen Punktionen des PSR-8 zu
geben, haben wir ein kleines Demostück
einprogrammiert, das automatisch
abgespielt werden kann und Ihnen
einige Stimmen des PSR-8
demonstriert.
1. Das Gerät einschalten.
Schieben Sie den POWER-Schalter
0in die Position ON, Bei
eingeschaltetem Keyboard leuchtet
die TEMPO-Anzeige auf.
2. Die Anfangslautstarke
einstellen.
Schieben Sie den MASTER
VOLUME-Regler ©ungefähr in die
Mitte zwischen "MIN"- und "MAX"-
Stellung. Nach Spielbeginn können
Sie den Regler dann auf die
gewünschte Lautstärke einstellen.
ECOUTE DE LA
MUSIQUE DE
DEMONSTRATION
Afin de donner une idée des possibilités
sophistiquées de l'instrument, le PSR-8 a
été programmé avec une séquence
musicale reproduite automatiquement qui
démontre un certain nombre des voix de
l'instrument.
1. Mise sous tension
Faire coulisser ('interrupteur POWER
©sur la position ON. L'affichage
TEMPO s'allume lorsque l'instrument
est mis sous tension.
2. Réglage d'un niveau de volume
Initial
Faire coulisser la commande
MASTER VOLUME ©sur une
position à mi-chemin entre les
positions "MIN" et "MAX". Régler cette
commande pour un niveau d'écoute
confortable après le début de la
reproduction.
DEMOSTRACION
Para que usted se haga una idea de la
sofisticadas capacidades del PSR-8, está
programado con una secuencia de
demostración que reproduce
automáticamente mientras demuestra
ciertas voces del instrumento.
L Conexión
Deslice el interruptor POWER ©a
la posición ON. Se encenderá la
visualizadón de TEMPO cuando se
conecte la alimentación.
2. Ajuste un nivel de volumen
inicial
Deslice el control MASTER
VOLUMEN ©a una posición
intermedia entre "MIN" y MAX".
Podrá ajustar este control al nivel de
volumen más apropiado después de
haberse iniciado la reproducción.
8