User Manual
Table Of Contents
- Contents
- Function List
- 1 Styles
- Style Types (Characteristics)
- Registering Files to the Favorite Tab
- Changing the Chord Fingering Type
- Chord Types Recognized in the Fingered Mode
- Using the Chord Tutor Function
- Turning Each Channel of the Style On/Off
- Style Playback Related Settings
- Adjusting the Tempo
- Recording a Chord Sequence when Style Playback is stopped (Chord Looper)
- Saving and Calling up Your Custom Chord Sequences (Chord Looper)
- Creating/Editing Styles (Style Creator)
- 2 Voices
- Voice Part Setup Display
- Voice Selection Display-related Settings
- Voice Types (Characteristics)
- Registering Files to the Favorite Tab
- Metronome Settings
- Keyboard-related Settings
- Keyboard Part-related Settings (Voice Setting)
- Transposing the Pitch in Semitones
- Fine Tuning the Pitch of the Entire Instrument (Master Tune)
- Making Detailed Settings for Harmony/Arpeggio
- Editing Voices (Voice Edit)
- Editing Organ Flutes Voices (Voice Edit)
- 3 Multi Pads
- 4 Song Playback
- Creating a Song List for Playback
- Using Repeat Playback Mode
- Editing Music Notation (Score) Settings
- Displaying Lyrics and Setting Up the Display
- Displaying Text and Setting Up the Display
- Using the Auto Accompaniment Features with MIDI Song Playback
- Turning Each Channel of a MIDI Song On/Off
- Song Playback Related Settings
- 5 MIDI Song Recording/Editing
- 6 Registration Memory
- 7 Playlist
- 8 Microphone
- 9 Mixer
- 10 Controller Function Settings
- 11 MIDI Settings
- 12 Network Settings
- 13 Utility
- 14 Expansion Pack Related Operations
- 15 Connections
- Index
PSR-A5000 Reference Manual 97
9
Mixer
1 Select the desired EQ type to be edited.
• Flat: Flat EQ settings. The gain of each frequency is set to 0dB.
• Powerful: Powerful EQ settings in which all frequency sounds are emphasized. This can be used to boost the
music for parties, etc.
• Mellow: Soft and mellow EQ settings in which high-frequency bands are reduced slightly.
• Bright: EQ setting for boosting the level of the high frequencies, making the sound brighter.
• With Subwoofer: Custom EQ settings in which low-frequency bands are reduced. This is an optimum setting
for using this instrument along with a subwoofer, such as the KS-SW100 (sold separately).
• User1–30: Your own custom EQ settings saved in step 4.
2 Adjust the Q (bandwidth) and the Center Frequency of each band.
The available Frequency range is different for each band. The higher the value of Q, the narrower the bandwidth.
3 Adjust the Gain level to boost or cut each of the eight bands as desired.
4 Touch (Save) to save the settings as a User Master EQ type.
Up to 30 EQ types can be created and saved.
4
2
1
3
The settings will be lost if you
turn the power to the instrument
off without carrying out the Save
operation.
If you want to save the Master EQ set-
tings to the USB flash drive, save them
as a User Effect file. To do this, from the
display called up via [MENU] [Util-
ity] [Factory Reset/Backup] page
2/2, touch [Save] of “User Effect” to
carry out the Save operation (page 127).
NOTICE
NOTE