User Manual

The Functions
PSR-E343/YPT-340 Owner’s Manual
34
Main Voice (page 14)
009 Volume M.Volume 000–127 * Determines the volume of the Main Voice.
010 Octave M.Octave -2 – +2 * Determines the octave range for the Main Voice.
011 Chorus Depth M.Chorus 000–127 *
Determines how much of the Main Voice’s signal is sent to the
Chorus effect.
Dual Voice (page 15)
012 Dual Voice D.Voice 001–550 * Selects a Dual Voice.
013 Volume D.Volume 000–127 * Determines the volume of the Dual Voice.
014 Octave D.Octave -2 – +2 * Determines the octave range for the Dual Voice.
015 Chorus Depth D.Chorus 000–127 *
Determines how much of the Dual Voice’s signal is sent to the
Chorus effect.
Split Voice (page 15)
016 Split Voice S.Voice 001–550 45 (FngrBass) Selects a Split Voice.
017 Volume S.Volume 000–127 * Determines the volume of the Split Voice.
018 Octave S.Octave -2 – +2 * Determines the octave range for the Split Voice.
019 Chorus Depth S.Chorus 000–127 *
Determines how much of the Split Voice’s signal is sent to the
Chorus effect.
Effects
020 Reverb Type Reverb 01–10 ** Determines the Reverb type, including off (10). (page 59)
021 Reverb Level RevLevel 000–127 64
Determines how much of the Voice’s signal is sent to the Reverb
effect.
022 Chorus Type Chorus 01–05 ** Determines the Chorus type, including off (05). (page 59)
023 Sustain Sustain ON/OFF OFF Determines whether the Sustain function is on or off.
024 Master EQ Type MasterEQ
1 (Speaker)
2 (Headphone)
3 (Boost)
4 (Piano)
5 (Bright)
6 (Mild)
1 (Speaker)
Sets the equalizer applied to the speaker output for optimum
sound in different listening situations. (page 12)
025 Wide Type Wide
1 (Wide1)
2 (Wide2)
3 (Wide3)
2 (Wide2)
Determines the Ultra-Wide Stereo type.
Higher values produce a greater Wide effect. (page 15)
Harmony (page 16)
026 Harmony Type HarmType 01–26 *
Determines the Harmony type.
Refer to the Harmony Type list on page 59.
027 Harmony Volume HarmVol 000–127 *
Determines the volume of the Harmony effect when one of the
Harmony types 1–5 is selected.
Computer (page 35)
028 PC mode PC mode PC1/PC2/OFF OFF
Optimizes the MIDI settings when you connect to a computer
(page 35).
MIDI
029 Local Control Local ON/OFF ON
Determines whether the instrument’s keyboard controls the inter-
nal tone generator (ON) or not (OFF). When you record your key-
board performance to the application software on the computer
via MIDI, set this parameter to OFF.
030 External Clock ExtClock ON/OFF OFF
Determines whether the instrument synchronizes to the internal
clock (OFF) or an external clock (ON). When you record your key-
board performance to the application software on the computer
via MIDI, set this parameter to ON.
031 Initial Send InitSend YES/NO –
Lets you send the data of the panel settings to a computer. Press
[+/YES] to send, or press [-/NO] to cancel. This operation should
be done immediately after starting the Recording operation on the
computer.
Metronome (page 14)
032
Time Signature
Numerator
TimeSigN 00–60 ** Determines the time signature of the Metronome.
033
Time Signature
Denominator
TimeSigD
Half note, Quarter
note, Eighth note,
Sixteenth note
** Determines the length of each metronome beat.
034 Metronome Volume MetroVol 000–127 100 Determines the volume of the Metronome.
Function
Number
Function name Display Range/Settings Default Value Descriptions