Datasheet

PSR-E443 Owner’s Manual
21
Quick Guide
Creating Arpeggios
The Arpeggio function lets you create arpeggios (broken chords) by simply pressing
the notes of the chord. For example, you could play the notes of a triad—the root, third,
and fifth—to trigger interesting phrases. This feature can be used for music production
as well as performance.
1
Press the [ARPEGGIO] button to turn on
the Arpeggio function.
2
Press a note or notes to trigger Arpeg-
gio.
The Arpeggio phrase differs depending on the
number of pressed notes and the area of the key-
board.
When Split is on, Arpeggio is applied only to the
Split Voice. When Split is off, Arpeggio is applied
to the Main and Dual Voices. Arpeggio cannot be
applied to the Split and Main/Dual Voices simulta-
neously.
3
To turn off the Arpeggio, press the
[ARPEGGIO] button again.
The most suitable Arpeggio Type is automatically
selected when you select a Main Voice, but you can
easily select any other Arpeggio Type.
1
Hold down the ARPEGGIO [TYPE] but-
ton for long er than a second.
In the display, “ARP Type” appears for a few sec-
onds, followed by the current Arpeggio Type
appears.
2
Rotate the dial to select the desired
Arpeggio type
An Arpeggio Type List is provided in the separate
Data List.
Triggering the Arpeggio
• Selecting a Voice number between 259 and 298 will turn
on Arpeggio automatically.
• Selecting a Voice number between 289 and 298 will turn
on Split automatically, as well as Arpeggio. When one of
those Voices is selected, Arpeggio is triggered only by
playing a key to the left of the Split Point.
• When an optional Footswitch (page 14) connected to the
SUSTAIN jack is pressed, the Arpeggio will continue to
play after the note is released (page 43).
RS Sync1
150
NOTE
NOTE
Changing the Arpeggio Type
Hold for longer
than a second.
SynArp1
004
The currently selected arpeggio
type