Before using the instrument, be sure to read “PRECAUTIONS” on pages 5 – 7.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
Information for users on collection and disposal of old equipment and used batteries: These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation.
For the AC adaptor Explanation of Graphical Symbols CAUTIO N RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. For the AC adaptor WARNING CAUTION • This AC adaptor is designed for use with only Yamaha electronic instruments. Do not use for any other purpose. • Indoor use only. Do not use in any wet environments. • When setting up, make sure that the AC outlet is easily accessible.
- Use the specified battery type (page 72) only. - Use new batteries, all of which are the same type, same model, and made by the same manufacturer. - Always make sure all batteries are inserted in conformity with the +/- polarity markings. - When the batteries run out, or if the instrument is not to be used for a long time, remove the batteries from the instrument. - When using Ni-MH batteries, follow the instructions that came with the batteries. Use only the specified charger device when charging.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. - Always turn the power off when the instrument is not in use. - Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
Table of Contents Special Features ............................................................... 9 Compatible Format and Functions ........................... 10 Included Accessories ............................................... 10 About the Manuals ................................................... 11 Playing with Groove Creator Using Quick Sampling Panel Controls and Terminals 12 Setting Up 16 Power Requirements.......................................................
Special Features For PSR-E473 and PSR-EW425 Next Generation Sound Mega Boost Function Mic Input Thanks to the latest tone generator, the expressive power is enhanced, giving you strong, dynamic sound and presence in just a single instrument. The maximum polyphony is 64 sounds, and two DSP Effect systems are built in: DSP1 for the main sound and DSP2 which can be assigned to specific parts (page 28). Furthermore, you can use the delay effect with both DSP1 and DSP2.
Thank you for purchasing this Yamaha Digital Keyboard! The instrument is a portable keyboard with featuring a wide variety of sounds and functions. We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the instrument. We also recommend that you keep this manual in a safe and handy place for future reference.
About the Manuals This instrument has the following documents and instructional materials. Included Documents • Owner's Manual (this book) Explains how to use the basic functions of the instrument. Online Materials (Downloadable from the web) • Reference Manual Explains how to make detailed settings for the functions of the instrument. • Data List Contains preset content lists, such as those of Voices, Styles, Grooves and Effects.
Panel Controls and Terminals Front Panel NOTE • The illustrations and displays as shown in this manual are based on the PSR-E473. • Please note that the PSR-E473 and PSR-EW425 have different numbers of keys: the PSR-E473 has 61 keys, and the PSR-EW425 has 76 keys. Display (page 22) B A C D E F G H 036 (C1) 048 (C2) 060 (C3) 072 (C4) 084 (C5) 096 (C6) As illustrated, each note of the keyboard has a specific note number and name (e.g.
Panel Controls and Terminals !0 [DSP2] button ............................................... page 28 Turns the DSP2 effect on or off. B y t r u : Calls up the DSP2 type selection display. !1 [DEMO] button ............................................. page 35 Plays back Demo Songs repeatedly. i : Calls up the Song group (Demo group) setting display to play back the Songs repeatedly. o !2 [METRONOME] button ............................... page 23 Turns the metronome on or off.
Panel Controls and Terminals C D @2 !7 @0 !9 !8 @1 @7 @6 @8 @9 #0 #1 @6 − #1 Playback control buttons Controls playback of Style, Song/Audio, or Groove, depending on which lamp is lit. @3 @4 • When the [STYLE] lamp is lit.................... page 31 • When the [SONG/AUDIO] lamp is lit........ page 34 • When the [GROOVE CREATOR] lamp is lit ................................................................... page 40 @5 : Calls up the Split Point setting display. !7 [VOICE] button ...........
Panel Controls and Terminals G H $7 $3 $4 $5 $6 $8 $9 $9 [PITCH BEND] wheel Bends the pitch of the keyboard-played sound up or down by moving this upward or downward. QUICK SAMPLING $3 − $6 [A] − [D] pads ....................................... page 42 Plays back the sample assigned to each pad. $7 [LOOP HOLD] button .................................. page 42 While holding down this button, pressing one of the [A] − [D] pads plays the selected sample repeatedly in a loop.
Setting Up Power Requirements Plug Although the instrument will run either from an AC adaptor or batteries, Yamaha recommends use of an AC adaptor whenever possible. Slide the plug as indicated. NOTICE The shape of the plug may differ depending on your area. You should use an AC adaptor when executing USB flash drive operations, since battery power may not be reliable enough to last through these crucial operations.
Setting Up PSR-EW425 NOTE • This instrument cannot charge the batteries. Use only the specified charger device when charging. • Power will be automatically drawn from the AC adaptor if an AC adaptor is connected, even while batteries are installed in the instrument. Setting the battery type You need to change the battery type setting on this instrument, depending on the battery type to be used.
Setting Up Turning the Power On/Off 1 Turn down the [MASTER VOLUME] control to “MIN.” 1 2 Disabling Auto Power Off (simple method) Turn the power on while holding down the lowest key on the keyboard. This starts the instrument with the Auto Power Off function disabled. PSR-E473 The lowest key 2 Press the [ power on. ] (Standby/On) switch to turn the 3 Adjust the volume of the entire keyboard sound by using the [MASTER VOLUME] control while playing the keyboard.
Setting Up Using a Keyboard Stand The following keyboard stands (sold separately) can be used. • PSR-E473: L-2C • PSR-EW425: L-6 When using the L-6 Keyboard Stand (PSR-EW425) The exterior size of PSR-EW425 exceeds the limits as described in the L-6 Assembly Instructions. However, we have determined through tests that the stand can be safely used for the instrument. When setting the instrument, place it on the center of the stand as shown in the illustration.
Basic Operations and Display Items Basic operations This instrument features four basic functions: Voice, Style, Song/Audio and Groove Creator. To use this instrument, select a basic function first, and then select the desired data to use for your performance. 1 3 1 Select the desired function by pressing one of the [VOICE], [SONG/AUDIO], [GROOVE CREATOR], and [STYLE] buttons. NOTE Only one of the Style, Song/Audio, Groove Creator function can be used.
Basic Operations and Display Items Selecting Data Number Input mode On/Off (Only for Voices and Styles) You can select data (Voice, Style, etc.) by using the dial, category button or number input buttons. By using the dial Rotate the dial clockwise to increase the number, or counterclockwise to decrease the number. Decrease To input numbers when selecting Voices or Styles, you need to turn on NUM LOCK to change the category buttons to the number input buttons.
Basic Operations and Display Items Display Items The display shows the current instrument settings, such as Voice, Style, Song, Audio and Groove. q 001L!CGrPno 001 118 w 01 1 0 e r t 1 y q Power/USB status Indicates the battery status and the USB flash drive status. Battery status (page 17) r Playback/Recording status, Function number Indicates the playback or recording status including the detected chord and tempo. While in the Function Setting (page 61), the function number is shown.
Using the Common Functions This section explains about the common operations for each basic function, and the functions that affect the entire instrument. Using the Tap Tempo Function Using the Metronome The metronome can be used for effective practice. 1 Press the [METRONOME] button to start the metronome. During playback of a Style or Song, you can change the tempo by tapping the [TEMPO/TAP] button twice at the desired tempo.
Playing a Variety of Instrument Voices This instrument features various instrumental Voices including piano. Not only can you play just one single Voice (Main Voice), but you can also layer a different Voice (Dual Voice) with the Main Voice, or play a different Voice (Split Voice) in the left-hand area of the keyboard from the right-hand area. Selecting a Main Voice Adding a layer - Dual Voice 1 Press the [VOICE] button. The Voice number and name will be shown.
Playing a Variety of Instrument Voices Playing a Split Voice in the Leftand Right-hand Areas The “SplitPnt” setting (page 62, Function 004) appears. Rotate the dial to change the setting. Adjusting the Volume of a Split Voice By dividing the keyboard into two separate areas as shown in the figure below, you can play different Voices in the left hand and right hand areas. Adjust the Function Settings (page 63, Function 026). The Voice that is played in the left-hand area is called a “Split Voice.
Playing a Variety of Instrument Voices Adding Harmony/Using Arpeggio You can add effects such as Harmony, Tremolo, and Echo to the the Voice played on the keyboard, or use the Arpeggio function to automatically arpeggiate chords. There are a variety of effects available for each Harmony type and Arpeggio type. For details, refer to “Effect Type List” in the Data List on the website (page 11).
Playing a Variety of Instrument Voices Adding Articulation Effects Articulation reproduces playing techniques for particular instruments, such as guitar harmonics. Articulation is added to your performance only while the [ARTICULATION] button is pressed. Voices to which Articulation can be added are called S.Art Lite (Super Articulation Lite) Voices.
Adding Effects to Performance and Playback You can expand your range of expression by adding effects to keyboard performances, Style/Song/Groove playback, and microphone input. 3 Rotate the dial to select the desired Adding DSP Effects DSP2 type. This instrument is equipped with two DSPs (digital signal processors) for applying digital effects that enhance the sound (DSP1, DSP2).
Adding Effects to Performance and Playback Adding Motion Effects You can add dynamic effects to your performance. Motion effects are added only while the [MOTION EFFECT] button is pressed and held. 001L!CGrPno 01 01 Current Motion Effect type There are various types of Motion Effects, such as filter effects, pitch effects, and modulation effects. For details about the different types of Motion Effects available, refer to “Effect Type List” in the Data List on the website (page 11).
Creating Original Sounds via the Knobs The two knobs can be used to add variations to the sound being played, transforming the sound in a variety of musical ways. Select the desired function combination printed above the knobs, and then rotate the knobs as you play, for more expressive and dynamic performance. Assigning Functions to the Knobs Repeatedly press the [KNOB ASSIGN] button to sequentially assign the function combinations provided: 1 → 2 → 3 → 4 → 5 → 6 → 7 → 1 ... etc.
Playing with Rhythm and Auto Accompaniment (Styles) This instrument is equipped with rhythms and accompaniment patterns in a variety of genres, called Styles. You can use the Auto Accompaniment (ACMP) function for a Style to play the appropriate accompaniment simply by playing chords with your left hand. This allows you to enjoy being accompanied by a band or orchestra, even when you are playing alone. 4 Press the [SYNC START] button to turn Playing with Styles Sync Start on. 1 Press the [STYLE] button.
Playing with Rhythm and Auto Accompaniment (Styles) Style Playback Variations Styles have Intro, Main A/B, and Ending sections. The Main A section is played as default pattern, but you can add variations to a performance by switching sections. The operations for switching to each section are described below. Adjusting the Volume of the Style You can adjust the volume balance between Style playback and your keyboard performance. Adjust it in the Function Settings (page 63, Function 031).
Playing with Rhythm and Auto Accompaniment (Styles) Setting the Fingering Type When playing back a Style, the method for playing chords in the Auto Accompaniment area is called a Fingering Type. This instrument has two Fingering Types. Multi-Finger (default) Play the entire notes of a chord to play back the Auto Accompaniment. However, you can also easily play major, minor, seventh, and minor seventh chords by simply pressing one to three keys.
Playing Back Songs or Audio Files With this instrument, you can play back Songs (MIDI data) and audio files. In addition to listening to the playback, you can play the keyboard along with the Song or audio file playback. Song (MIDI Data) This instrument can play Preset Songs, Songs you recorded on this instrument, or commercially available Songs. MIDI data is comprised of your keyboard performance information, such as pressing/releasing keys, etc.
Playing Back Songs or Audio Files 3 Press the [ Playing Back a Demo Song ] (Start/Stop) button to start playback. Press the [DEMO] button. Demo Songs 001–003 are played back in sequence. Playback will repeat continuously, starting again from the first Song (001). To stop playback, press the [ button again. ] (Start/Stop) Current measure 013Jeanie 001 To stop playback, press the [DEMO] or [ (Start/Stop) button.
Playing Back Songs or Audio Files Playing Back an Audio File Message List Message NOTICE Do not disconnect the USB flash drive or turn off the power to the instrument during playback of an audio file. Otherwise, damage to the data may occur. 1 Connect a USB flash drive to the [USB TO DEVICE] terminal. Description NoUSB No USB flash drive is connected. NoFile There is no audio file in the USB flash drive. ErrLoad Cannot load the audio file because the format is not compatible with this instrument.
Playing Back Songs or Audio Files Playing a Specified Section of a Song Repeatedly (A-B Repeat) You can play back only a specific section of a Song (MIDI data) repeatedly by setting the A point (start point) and B point (end point) in one-measure increments. A Muting Each Track Each track of a Song plays different parts, such as the melody, rhythm, and accompaniment, etc. Each of the tracks can be muted so that you can play the muted part yourself.
Connecting and Using a Microphone By connecting a microphone to the [MIC INPUT] jack, you can sing along with your keyboard performance while applying reverb and chorus effects to your vocals. Sound that is input from the microphone is played from the built-in speakers. You can also switch to the Talk setting when you want to talk between songs. CAUTION Before connecting the instrument to external devices, turn off the power of all the devices.
Connecting and Using a Microphone Using the Talk Function Disconnecting the Microphone Press the [MIC VOCAL/TALK/MUTE] button to switch the Mic type to Talk. 1 Turn the volume down by turning the [MASTER VOLUME] control all the way to the left. Mic on Mic type: Vocal Mic on Mic type: Talk Mic off When the Mic type is set to Talk, the reverb and chorus are turned off and the microphone is panned to the center. 2 Turn the instrument off. 3 Disconnect the microphone from the [MIC INPUT] jack.
Playing with Groove Creator The Groove Creator function lets you combine rhythmic preset patterns and phrases (each called a Groove) from a variety of dance music genres for dynamic and powerful performances. Try out the expressive performance features, such as changing keys in the left-hand area of the keyboard and rotating the knobs for dynamic sound variations. Playing Back a Groove Changing the Groove Sound 1 Press the [GROOVE CREATOR] button, and use the dial to select the desired Groove.
Playing with Groove Creator Using the Retrigger function Groove Retrigger is a function which repeats the first part of the current Groove, for a rhythmic break effect. For details about how to use this function, refer to the Reference Manual on the website (page 11). Changing the key Play the keyboard in the Auto Accompaniment area (page 31).
Using Quick Sampling This instrument features an extremely convenient and powerful Quick Sampling function for sampling audio and playing it back with the pads. Sampling Sampling is a technology that lets you record a short portion of a song or a sound, and use the sound (called a “sample”) as part of your performance. Unlike audio files, the samples can be used in various ways: to add special sound effects, or to play in a loop for a repeating rhythmic pattern.
Using Quick Sampling Getting Ready for Sampling Connect an external device for sampling, and adjust the volume level for recording. NOTE Sampling External Audio Sample the audio input, and save it to one of the QUICK SAMPLING [A]-[D] pads. NOTE If the volume of the audio input is too low, the instrument cannot sample the sound. 1 Set the volume level of this instrument to minimum. 2 Connect an external device for sampling.
Using Quick Sampling 5 Press the pad that is flashing to start sampling. “Sampling” appears on the display. Flashes Sampling Once you are familiar with the sampling operation, streamline the operation by starting and stopping sampling while the sound of the external device is playing back. 1. Perform Steps 2 and 3 of “Sampling External Audio” (page 43). 2. Stop playback on the external device a few measures before the sound or phrase you want to sample.
Using Quick Sampling Restoring the Default Samples This operation lets you restore the default samples for each Quick Sampling pad. However, keep in mind that this deletes the samples you have assigned to the pads. NOTICE Restoring the default samples overwrites any samples that you have assigned to the pads. Save important samples you want to keep to a USB flash drive (page 56) before restoring the default samples. 1 Press the [CAPTURE] button to enter the Quick Sampling mode.
Recording Your Performance On this instrument, there are two different ways you can record your performances: Song (with MIDI), and Audio. Song Recording You can record your performances to the internal memory as User Songs. This approach makes editing easy, as you can record to individual tracks, erase tracks after recording, and re-record individual tracks, etc. You can record a maximum of 10 User Songs and up to a total of about 19,000 notes.
Recording Your Performance Track Structure of a Song NOTICE Never attempt to turn the power off when “Writing!” is shown in the display. Doing so can result in data loss. NOTE If you are using a Style or the Groove Creator for a performance, you can also automatically end recording in the following ways. • Style: Press the [INTRO/ENDING/rit.] button, and wait for playback of the Style to end. • Groove Creator: Press the [MUSICAL CLIMAX] button, and wait for playback of the Groove to end.
Recording Your Performance 3 Specify the track to record and over- write, and enter Record Ready mode. PECUser 1 001 Clearing a User Song (Song Clear) This lets you clear all tracks of a User Song. 1 Press the [SONG/AUDIO] button. The SONG icon appears. Flashes Selected track flashes If you want to record only the melody: While holding down the [REC] button, press the button for the track you want to record to ([1/ RIGHT] to [5]). If the AUDIO icon appears, press the [SONG/ AUDIO] button again.
Recording Your Performance Clearing a Specified Track from a User Song (Track Clear) Recording/Saving Audio Files to a USB Flash Drive This lets you clear individual tracks from a User Song. This lets you record your performances to a USB flash drive as audio files. 1 Press the [SONG/AUDIO] button. The NOTICE SONG icon appears. If the AUDIO icon appears, press the [SONG/ AUDIO] button again. If “No USB” is displayed instead of the SONG icon, wait a few seconds for the SONG icon to appear.
Recording Your Performance 4 Press the [REC] button to start recording. The elapsed time is shown on the display during recording. The maximum recording time is 80 minutes or until the memory of the USB flash drive becomes full. When recording the Style or Groove, press the [ ] (Start/Stop) button to start/stop the Style/Groove.. Recording-related Message List Message No USB flash drive is connected. UseAdpt Power is now being drawn from batteries. Use an AC adaptor.
Saving Your Favorite Settings (Registration Memory) The Registration Memory function allows you to save (or “register”) panel settings such as Voices and Styles to a Registration Memory button, and then instantly recall your custom panel settings by simply pressing a single button. The registered settings for four Registration Memory buttons make one Bank, and you can register up to eight Banks. 8 Banks Memory 1 Memory 2 Memory 3 Memory 4 Up to 32 settings (eight banks of four each) can be memorized.
Saving Your Favorite Settings (Registration Memory) Recalling Panel Settings from Registration Memory 1 Press the [BANK] button to select a Bank number (1 to 8). Appears when either Freeze is on (see right). 1 Bank number Registration Memory number The Registration Memory number, to which settings are saved, lights. 2 Press the desired [MEMORY] button, [1] to [4]. Various settings can be saved in Registration Memory and recalled with a single operation.
Connecting to External Devices CAUTION Before connecting the instrument to external devices, turn off the power of all the devices. Also, before turning the power on or off, make sure to set all volume levels to minimum. Otherwise, damage to the devices or electrical shock might occur. Connecting Headphones Connect headphones to the [PHONES] jack. The instrument’s speakers are automatically shut off when a plug is inserted into this jack.
Connecting to External Devices Playing an External Audio Device with the Built-in Speakers By connecting an audio device such as a smartphone to the instrument’s [AUX IN] jack, you can output the sound of the audio device through the instrument’s speakers. This lets you play the keyboard along with the playback of your audio device, for practice or performance. NOTICE To avoid damaging devices, first turn on the power to the external device, and then to the instrument.
Connecting to External Devices USB terminal Computer NOTE [USB TO HOST] terminal USB cable • With this instrument, User Songs cannot be transferred to external devices via the [USB TO HOST] terminal. To export User Songs, save them to a USB Flash Drive (page 59). • The maximum size of a single Style file is 50 KB. Files that exceed this limit will not be recognized by the instrument.
Connecting a USB Flash Drive By connecting a USB flash drive (sold separately) to the [USB TO DEVICE] terminal, you can save data created on the instrument, such as User Songs and parameter settings. The saved data can be recalled to the instrument for future use. NOTICE You should use an AC adaptor when executing USB flash drive operations. Battery power might not be reliable enough to last through these crucial operations.
Connecting a USB Flash Drive Using USB Flash Drives NOTICE Before using a USB flash drive, be sure to read “Precautions when using the [USB TO DEVICE] terminal” on page 56. NOTE Messages might appear on the display during File Control procedures to aid in operation. Refer to the Message List on page 60 for details. 1 Connect a USB flash drive to the [USB TO DEVICE] terminal, and wait until “USB” appears on the left corner of the display.
Connecting a USB Flash Drive Exiting the File Control Display 1 Rotate the dial until “Exit?” appears. Exit? Formatting a USB Flash Drive The Format operation lets you prepare commercially available USB flash drives for use with the instrument. NOTICE The format operation overwrites any previously existing data. Make sure that the USB flash drive you are formatting does not contain important data. 2 Press the [ENTER] button to exit the File Control display.
Connecting a USB Flash Drive Saving Data to a USB Flash Drive The following types of data on this instrument can be saved to a USB flash drive. For details about how to save each type of data, refer to the Reference Manual on the website (page 11). User Data The following three types of data on this instrument are called “User data.” User data is saved as a single “User File” (.usr).
Connecting a USB Flash Drive File-related Message List Message 60 Meaning Can'tUse Files cannot be used at this time, because the USB flash drive is reading or writing. Complete An operation, such as saving or transferring data, is complete. DataErr The data is not in the correct format. DiskFull Data cannot be saved because the flash drive has become full. Delete any unnecessary data or use another USB flash drive. Error There is an error in the file, or an error occurred during the operation.
The Functions The “Functions” provide access to a range of detailed instrument parameters such as Tuning, Split Point, Voices, and Effects. Find the desired item in the Function List (page 62-67), and then follow the instructions below. Basic Procedure in the Function Display 1 Press the [FUNCTION] button to call up 4 Use the dial or the [+] and [−] buttons to set the value of the selected function. To restore the default value, press the [+] and [−] buttons simultaneously.
The Functions Function List Function Number Function Display Range/Settings Default Value Description Backup Overall Transpos −12 to 12 0 Tuning 427.0 Hz to 453.0 Hz 440.0 Hz Pitch Bend Range PB Range 01 to 12 2 Split Point SplitPnt 036 to 096 (C1 to C6; PSR-E473)/ 028 to 103 (E0 to G6; PSR-EW425) 054 (F#2) 001 Transpose 002 Tuning 003 004 005 Touch Response TouchRes 1 (Soft) 2 (Medium) 3 (Hard) 4 (Fixed) Sets the pitch in semitones.
The Functions Function Number Function Display Range/Settings S.Voice 001 to 820 Default Value Description Backup Split Voice 089 Selects a Split Voice. 025 Voice 026 Volume S.Volume 000 to 127 * Determines the volume of the Split Voice. 027 Octave S.Octave −2 to +2 * Determines the octave range for the Split Voice. 028 Pan S.Pan L63 to L01, C, R01 to R63 * Determines the panning (stereo position where audio is heard) of the Split Voice. 029 Reverb Depth S.
The Functions Function Number Function Display Range/Settings Default Value Description Backup Microphone Depends on the Determines the volume of the microphone input. mic type L63 to L01, C, R01 to R63 Determines the panning (stereo position where audio is heard) Depends of the microphone input. However, if the microphone is off or the on the Mic type is set to “TALK,” “---” is displayed and this option cannot mic type be set.
The Functions Function Number Function Display Range/Settings Default Value Description Backup Scale Tuning 055 056 Scale Base Note 057 Tuning Note 058 Tuning Scale BaseNote 1 (Equal) 2 (Pure Maj) 3 (Pure min) 4 (Bayat) 5 (Rast) 01 (C), 02 (C#), 03 (D), 04 (Eb), 05 (E), 06 (F), 07 (F#), 08 (G), 09 (Ab), 10 (A), 11 (Bb), 12 (B) TuneNote 01 (C), 02 (C#), 03 (D), 04 (Eb), 05 (E), 06 (F), 07 (F#), 08 (G), 09 (Ab), 10 (A), 11 (Bb), 12 (B) Tune −64 to 63 Determines the temperament to use.
The Functions Function Number Function Display Range/Settings Default Value Description Backup Audio 068 [AUX IN] Audio Volume AuxInVol 000 to 127 50 Determines the volume of audio playback that is input from the [AUX IN] jack. 069 [USB TO HOST] [USB TO DEVICE] Audio Volume USBInVol 000 to 127 100 Determines the volume of audio playback that is input from the [USB TO HOST] and [USB TO DEVICE] terminals.
The Functions Function Number Function Display Range/Settings Default Value Description Backup AC 080 Auto Power Off AutoOff OFF, 5/10/15/ 30/60/120 (minutes) 30 minutes Determines the time that will elapse before the instrument’s power is automatically turned off. When set to “OFF,” the power does not turn off automatically. 081 Battery Battery 1 (Alkaline) 2 (Ni-MH) 1 (Alkaline) Determines the type of batteries to use.
Backup and Initialization Backup Data The following Backup parameters will be maintained even if the power is turned off. Backup parameters (each time) • User Songs (page 34) • Styles loaded from external devices (Styles 291 to 300) (*) • Samples saved to Quick Sampling pads (page 42) * For details about how to load Style files, refer to the Reference Manual on the website (page 11).
Troubleshooting Problem Possible Cause and Solution When the instrument is turned on after pressing the [ ] (Standby/On) switch, a popping sound is temporarily produced. This is normal and indicates that the instrument is receiving electrical power. When turning on the power, turn the [MASTER VOLUME] all the way down. When the instrument is turned on after pressing the [ ] (Standby/On) switch, power is turned off suddenly and unexpectedly.
Troubleshooting Problem Possible Cause and Solution Style parts other than the Rhythm part produce no sound. Style (ACMP) is not on. Press the [ACMP ON/OFF] button to display the ACMP indicator. (page 31) When a particular Style is selected, no rhythm is played even when the [START/STOP] button is pressed. This is normal. For styles that do not have any rhythm data, there will be no sound when you try to play back only the rhythm part.
Specifications PSR-E473 PSR-EW425 Product Name Digital Keyboard Dimensions (W x D x H) Size/Weight Weight Keyboard Control Interface Number of Keys 992 mm × 404 mm × 136 mm (39-1/16” x 15-7/8” x 5-3/8”) 1200 mm × 404 mm × 136 mm (47-1/4” x 15-7/8” x 5-3/8”) 7.0 kg (15 lbs., 7 oz.) (not including batteries) 8.3 kg (18 lbs., 5 oz.
Specifications PSR-E473 Registration Memory PSR-EW425 Number of Buttons 4 (x 8 banks) Control Freeze Metronome Yes Tempo Range Overall Controls 11 – 280 Transpose Tuning -12 to 0, 0 to +12 427.0 – 440.0 – 453.0 Hz (approx. 0.2Hz increments) Octave Button Functions Yes Scale Type 5 types PIANO Button Miscellaneous Yes Demo Yes Melody Suppressor Yes Crossfade Yes USB audio interface Storage 44.1 kHz, 16 bit, stereo Motion Effect 57 Mega Boost 2 steps (approx.
Index A H S A-B Repeat ..............................37 AC Adaptor .............................. 16 ACMP ......................................31 Arpeggio ..................................26 Articulation...............................27 Audio File...........................34, 36 Audio Recording ......................46 Auto Accompaniment area ......31 Auto Fill....................................32 Auto Power Off................... 18, 67 Harmony..................................26 Headphones .......
Important Notice: U.S. LIMITED WARRANTY for Customers in the United States For detailed information about this Yamaha product and warranty service, please either visit the following website address (printable file is available at our website) or contact Customer Service at the address or telephone number identified below. Website Address: Yamaha.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario M1S 3R1, Canada Tel: +1-416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A. Tel: +1-714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México, S.A. de C.V. Av. Insurgentes Sur 1647 Piso 9, Col. San José Insurgentes, Delegación Benito Juárez, CDMX, C.P.
