Setting Up DIGITAL KEYBOARD Appendix Reference Quick Guide Owner’s Manual Thank you for purchasing this Yamaha Digital Keyboard! We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the instrument. We also recommend that you keep this manual in a safe and handy place for future reference. Before using the instrument, be sure to read “PRECAUTIONS” on pages 5–7.
For PSR-E453/PSR-EW400 SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind.
For AC adaptor and PSR-E453/PSR-EW400 FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used.
For AC adaptor This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (fcc_sengen_C) CAN ICES-3 (B)/NMB-3(B) • This applies only to products distributed by Yamaha Canada Music Ltd. • Ceci ne s’applique qu’aux produits distribués par Yamaha Canada Musique Ltée.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. For AC adaptor WARNING CAUTION • This AC adaptor is designed for use with only Yamaha electronic instruments. Do not use for any other purpose. • Indoor use only. Do not use in any wet environments. • When setting up, make sure that the AC outlet is easily accessible.
• Keep batteries away from small children who might accidentally swallow them. Fire warning • Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire. Battery • Follow the precautions below. Failure to do so might result in explosion, fire, overheating or battery fluid leakage. - Do not tamper with or disassemble batteries. - Do not dispose of batteries in fire. - Do not attempt to recharge batteries that are not designed to be charged.
• Do not insert a finger or hand in any gaps on the instrument. • Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors. • Never insert or drop paper, metallic, or other objects into the gaps on the panel or keyboard. This could cause physical injury to you or others, damage to the instrument or other property, or operational failure.
Table of Contents Setting Up Special Features ..............................................................8 Compatible Format and Functions .................................10 Included Accessories .....................................................10 About the Manuals .........................................................11 Setting Up Panel Controls and Terminals 12 Setting Up 14 Power Requirements......................................................14 Turning the Power On/Off ...............
40 Selecting a Reverb Type ................................................40 Selecting a Chorus Type ................................................40 Pitch Controls—Transpose ............................................41 Pitch Controls—Fine Tuning ..........................................41 Pitch Controls—the [PITCH BEND] wheel .....................41 Calling Up Optimum Panel Settings—One Touch Setting (OTS) .............................................................
Compatible Format and Functions Setting Up GM System Level 1 “GM System Level 1” is an addition to the MIDI standard which ensures that any GM-compatible music data can be accurately played by any GM-compatible tone generator, regardless of manufacturer. The GM mark is affixed to all software and hardware products that support GM System Level. XGlite As its name implies, “XGlite” is a simplified version of Yamaha’s high-quality XG tone generation format.
About the Manuals Setting Up This instrument has the following documents and instructional materials. NOTE • The illustrations and displays as shown in this manual are based on the PSR-E453. • Please note that the PSR-EW400 and PSR-E453 have different numbers of keys: the PSR-EW400 has 76 keys, and the PSR-E453 has 61 keys. Included Documents Owner’s Manual (this book) • Setting Up Please read this section first. • Quick Guide This section explains how to use the basic functions.
Panel Controls and Terminals Setting Up Front Panel The illustration is of the PSR-E453. Setting Up Dial (page 18) e r t y u i o !0 !4 !5 q w !1 !3 !6 !8 !7 !9 @0 @1 !2 Display (page 19) • Voice List (Data List) • Style List (Data List) • Song List (Data List) • Pattern List (Data List) @5 @4 036 (C1) 048 (C2) 060 (C3) @2 12 PSR-E453/PSR-EW400 Owner’s Manual 072 (C4) 084 (C5) As illustrated, each note of the keyboard has a specific note number and name (e.g.
Panel Controls and Terminals !2 !3 !4 !5 !6 !7 !8 !9 @0 @1 @2 [ ] (Standby/On) switch ....................Page 16 [MASTER VOLUME] control ................Page 16 [PORTABLE GRAND] button ...............Page 20 [DEMO] button......................................Page 28 [TRANSPOSE] button ..........................Page 41 [MELODY SUPPRESSOR] button........Page 37 [LESSON] button..................................Page 30 [REC] button .........................................Page 32 [METRONOME] button........
Setting Up Power Requirements Plug Setting Up Although the instrument will run either from an AC adaptor or batteries, Yamaha recommends use of an AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not deplete resources. NOTICE Slide the plug as indicated. The shape of the plug differs depending on your area.
Setting Up PSR-EW400 NOTE Setting Up • This instrument cannot charge the batteries. Use only the specified charger device when charging. • Power will be automatically drawn from the AC adaptor if an AC adaptor is connected while batteries are installed in the instrument. Setting the battery type 3 Insert the six new batteries, putting them in the correct direction according to the illustration.
Setting Up Turning the Power On/Off Setting Up 1 Turn down the [MASTER VOLUME] control to “MIN”. 1 2 NOTICE • When the instrument is not operated for a specified period of time while connected to an external device such as an amplifier, speaker or computer, make sure to follow the instructions in the Owner’s Manual to turn off the power to the instrument and the connected devices, in order to protect the devices from damage.
Setting Up • PSR-EW400: When connecting an external speaker, refer to page 38. CAUTION • Do not use the headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. • Before connecting the instrument to other electronic components, turn off the power of all the components. Also, before turning any components on or off, make sure to set all volume levels to minimum. Otherwise, damage to the components or electrical shock may occur.
Basic Operation and Display Items Quick Guide Basic Operation This instrument features four basic functions: Voice, Style, Pattern and Song. To use this instrument, select a basic function first, and then make various settings. 3 2 Start a function or play the keyboard. Quick Guide Number buttons [0]–[9] Select a basic function. Dial Use these buttons to directly enter the desired Style/Voice number etc, or a parameter value. Example: Selecting Voice 003, Bright Piano. 1 Select an item or value.
Basic Operation and Display Items Display Items The display shows all the current settings of the Song, Style Pattern, Voice and other related functions. Power source status USB connection status Appears when USB flash drive is connected to this instrument (page 63). Notation Normally this indicates the notes you play. When the Song Lesson function is used, this indicates the current notes and chord of playback. When the Dictionary function is used, this indicates the notes of the chord you specify.
Try Playing a Variety of Instrument Voices This instrument features various instrumental Voices including piano. Not only can you play just one single Voice (Main Voice), but you can also layer a different Voice (Dual Voice) to the Main Voice, or play a different Voice (Split Voice) in the left-hand area of the keyboard from the right-hand area. Selecting a Main Voice 1 Press the [VOICE] button. The Voice number and name will be shown.
Try Playing a Variety of Instrument Voices Layering a Dual Voice In addition to the Main Voice, you can layer a different Voice over the entire keyboard as a “Dual Voice.” 1 Press the [DUAL] button to turn Dual on. Appears when Dual is on Playing a Split Voice in the Left Hand area By dividing the keyboard into the two separate areas, you can play a different Voice between the Left hand and Right hand areas. 1 Press the [SPLIT] button to turn Split on.
Try Playing a Variety of Instrument Voices Using the Metronome 2 A chime will sound on the first beat of each measure while a click sounds the other beats. If “0” is selected, a click sounds for all beats with no chime accent. Select 6 for this example. This instrument features a built-in metronome which can be used when practicing. 1 Press the [METRONOME] button to start the metronome. NOTE • This parameter cannot be set during playback of a Style, Song or Pattern.
Try Playing a Variety of Instrument Voices Adding Harmony Playing each Harmony Type You can add effects such as Harmony, Tremolo and Echo to the Main Voice. For a list of the effects, refer to the Harmony Type List in the separate Data List. 1 Press the [HARMONY] button to turn Harmony on. • Harmony type 01 to 05 Press the right-hand keys while playing chords in the Auto Accompaniment area of the keyboard when ACMP is on (page 26). • Harmony type 06 to 12 (Trill) Appears when the Harmony is on.
Creating Arpeggios The Arpeggio function lets you create arpeggios (broken chords) by simply pressing the notes of the chord. For example, you could play the notes of a triad—the root, third, and fifth—to trigger interesting phrases. This feature can be used for music production as well as performance. Triggering Arpeggios 1 Press the [ARPEGGIO] button to turn on the Arpeggio function. Appears when the Arpeggio is on.
Creating Original Sounds via the Knobs The two knobs can be used to add variations to the sound being played, transforming the sound in a variety of musical ways. Select the desired pre-programmed function combination printed above the knobs, then rotate the knobs, to enjoy the sound. Repeatedly press the [ASSIGN] button to sequentially assign the function combinations provided: (1) (2) (3) (4) (5) (6) (1) … etc. The current combination is shown in the display.
Playing Styles This instrument includes an Auto Accompaniment feature that plays appropriate “Styles” (rhythm + bass + chord accompaniment). You can select from a huge variety of Styles covering a wide range of musical genres. 1 Press the [STYLE] button, then use the dial to select the desired Style. 4 For the Style List, refer to the separate Data List. Play a chord in the Auto Accompaniment area to start playback. Play a melody with the right hand and chords with the left hand.
Playing with Patterns Like a DJ! The Pattern playback function lets you repeatedly play various rhythm patterns, and is particularly effective in dance music styles, such as Hip Hop, House, etc. Try out the cool DJ-like performance features—changing keys in the left-hand area of the keyboard and rotating the knobs for dynamic sound variations. Using the Retrigger function Press the [PATTERN] button, then use the dial to select the desired Pattern.
Playing Songs You can simply enjoy listening to the internal Songs, or use them with just about any of the functions, such as Lesson. Song Category The Songs are organized by category as listed below. • • • • • • • • Gives you an idea of the advanced capabilities of this instrument. Demonstrates many useful Voices of this instrument. These piano solo pieces are ideally suited for the Song Lesson. These piano ensemble pieces are also well suited for the Song Lesson.
Playing Songs Song Fast Forward, Fast Reverse, and Pause 3 When playback reaches to the point you want to specify as the end point, press the [ ] (A-B REPEAT) button again to set the B point. The specified A-B section of the Song will now play repeatedly. [ ] Fast Forward During playback, press this button to rapidly skip ahead to a later point in the Song. 4 To cancel repeat playback, press the [ ] (A-B REPEAT) button again. To stop playback, press the [ button.
Using the Song Lesson Feature You can use the selected Song for a left-hand, right-hand, or both-hands lesson. Try practicing with these three Song Lesson types while referring to the music scores in the Song Book downloaded from the website (page 11). Lesson Types Lesson 1 (LISTEN): You do not need to play the keyboard. The model melody/chords of the selected part will sound. Listen to it carefully and remember it as best as you can.
Using the Song Lesson Feature Making Practice Perfect— Repeat & Learn If you want to practice a specific section in which you made a mistake or you have difficulty with, use the Repeat & Learn function. Press the [ ] (REPEAT & LEARN) button during a lesson. Quick Guide The Song position will move back four measures, a one-measure count will play, then Song playback will start again. Playback of the four measures will repeat with a one-measure count-in. To exit from this status, press this button again.
Recording Your Performance You can record up to 10 of your performances to the instrument as User Songs. The recorded User Songs can be played back in the same way as the preset Songs. NOTE • This instrument records your performance and save it in an original format. If you want MIDI data, convert it to SMF by saving it to the connected USB flash drive (page 65).
Recording Your Performance NOTICE • Never attempt to turn the power off when “Writing!” is shown in the display. Doing so can result in a loss of data. 6 To play back the recorded Song, press the [ ] (Start/Stop) button. Recording to a Specified Track This section explains how to record to a specified track. This is useful when you want to record the additional performances to an already recorded Song, or re-record only one track of an already recorded Song.
Recording Your Performance If you want to record only the Pattern playback: 4 Press the [PATTERN] button, then select the desired Pattern. While holding down the [REC] button, press the [A] button. ACMP is automatically turned on. Press the [+/YES] button to clear the Song. A clear-in-progress message will appear briefly on the display. Clearing a Specified Track from a User Song This lets you clear individual tracks from a User Song.
Memorizing Your Favorite Settings (Registration Memory) Memorizing Panel Settings to the Registration Memory 1 Make the desired settings, such as those for Voice, Style, and Pattern. NOTE • Data cannot be saved to the Registration Memory during Song playback. 2 Press the REGISTRATION MEMORY [BANK/MEMORY] button to call up a Bank number on the display. 8 Banks Memory 1 Memory 2 Memory 3 Memory 4 Up to 32 settings (eight banks of four each) can be memorized.
Connecting to Other Devices CAUTION • Before connecting the instrument to external devices, turn off the power of all the devices. Also, before turning the power on or off, make sure to set all volume levels to minimum. Otherwise, damage to the devices or electrical shock may occur. Playing an External Audio Device with the Built-in Speakers 4 Adjust the audio playback volume on the audio device, then adjust the entire volume by rotating the [MASTER VOLUME] control of the instrument.
Connecting to Other Devices Files that can be transferred from a computer to this instrument (and vice versa). • Song file: .mid (SMF format 0/1) • Style file: .sty • Backup file: PSR-E453.BUP* (PSR-E453)/ PSREW400.BUP* (PSR-EW400) * Backup parameters (page 39) can be transferred and saved to a computer via Musicsoft Downloader as a single file. NOTE • The volume can be adjusted on the smart device, and also by using the instrument’s [MASTER VOLUME] control.
Connecting to Other Devices Using an External Stereo System for Playback (OUTPUT [L/L+R]/[R] jacks) (PSR-EW400) You can connect a stereo system to amplify the instrument’s sound by using the OUTPUT [L/L+R]/[R] jacks. Powered speaker Quick Guide Phone plug (standard) Speaker Mute On/Off Setting (PSR-EW400) You can set whether the sound of this instrument is always output from its built-in speaker or not. 1 Press the [FUNCTION] button.
Backup and Initialization Backup parameters • User Songs (page 32) • Style data transferred from a computer and loaded to Style numbers 221–230 (page 67) • Registration Memory (page 35) • FUNCTION Settings: (page 58) Tuning, Split Point, Touch Response, Style Volume, Song Volume, Pattern Volume, Metronome Volume, Demo Group, Demo Play Mode, Master EQ type, Audio Loop Back on/off, Your Tempo on/off, Auto Power Off Time, Battery Type, Language In addition to the Backup parameters above, all the data (includ
Handy Performance Features Reference Selecting a Reverb Type Selecting a Chorus Type The Reverb effect lets you play with a rich concert hall type ambience. Although selecting a Style or Song will call up the optimum Reverb type for the entire sound, you can select a different Reverb type manually. The Chorus effect creates a thick sound that sounds like many of the same Voices being played in unison.
Handy Performance Features Pitch Controls—Transpose The overall pitch of the instrument (except for the Drum Kit Voices) can be shifted up or down by a maximum of 1 octave in semitone increments. 1 Press the [TRANSPOSE] button to call up “Transpos” (Function 006). Pitch Controls—the [PITCH BEND] wheel The [PITCH BEND] wheel can be used to add smooth pitch variations to notes you play on the keyboard. Roll the wheel upward to raise the pitch, or downward to lower the pitch.
Handy Performance Features Changing the Touch Response of the Keyboard Selecting an EQ Setting for the Best Sound The keyboard of this instrument is equipped with a Touch Response feature that lets you dynamically and expressively control the level of the Voices according to your playing strength.
Scale Tuning By default, the scale of this keyboard is set to Equal Temperament — the same tuning as with any acoustic piano. However, the setting can be changed to any other scale according to the music genre or music style you want to play. Selecting a Scale You can select a desired scale among the various preset scales. 1 2 Press the [FUNCTION] button.
Scale Tuning Tuning Each Note to Create an Original Scale 5 The setting can be reset to the initial default value by pressing the [+/YES] and [-/NO] buttons simultaneously. You can tune the individual notes in cents (a “cent” is 1/100th of a semitone) to create your original scale. 1 Press the [FUNCTION] button. Rotate the dial to tune the note over a range of -64 to +63. 6 Repeat steps 2–5 as desired. 7 Memorize the settings here to the Registration Memory as desired (page 35).
Voice Settings Selecting a Dual Voice Voice Editing 1 For each of the Main, Dual and Split Voices, you can edit the parameters such as volume, octave and depth of the Reverb and Chorus, allowing you to create new, custom sounds that best suit your musical needs. Hold down the [DUAL] button for longer than a second to call up “D.Voice” (Function 020). After a few seconds, the current Dual Voice appears. D.Voice 1 Press the [FUNCTION] button.
Parameters Assigned to the Knobs This section describes each of the parameters which can be assigned to the Knobs (page 25). z Filter NOTE Filter effects shape the sound by allowing only a specified range of frequencies to pass and/or by producing a resonance peak at the filter’s “cutoff” frequency. Filter effects can be used to create a range of synthesizer-like sounds. NOTE • These effects are applied only to the Main/Dual Voices played on the keyboard.
Parameters Assigned to the Knobs Even when there is no audio input from an external device, the volume of Song, Style and Pattern can be adjusted by using the knob. The volume of Voices played on the keyboard cannot be adjusted. NOTE • When the instrument is connected to the [USB TO HOST] terminal, and Audio Loop Back (page 60, Function 058) is set to OFF, you cannot adjust the volume of audio playback input from the external device.
Parameters Assigned to the Knobs Adding DSP Effects DSP is term of abbreviated form of Digital Signal Processor. DSP effects are applied only to a specified part as described below. 3 Rotate the dial to select a DSP type. 4 Press the CATEGORY [+] button once to call up “DSP Part” (Function 041). Parts to which DSP effects are applied After a few seconds, the current part to which the DSP effects are applied appears.
Arpeggio Settings Synchronizing an Arpeggio to Song/Style/Pattern Playback— Arpeggio Quantize When you play the keyboard to trigger an Arpeggio (page 24) along with Song/Style/Pattern playback, you’ll need to play the notes with correct timing to keep the Arpeggio in synchronization with the other playback tracks. However, your actual timing may be slightly ahead of or behind the beat (or both).
Style and Pattern Settings Style Variations—Sections Each Style consists of “Sections” that allow you to vary the arrangement of the accompaniment to match the song you are playing. INTRO MAIN A/B ENDING AUTO FILL INTRO This is used for the beginning of the Song. When the Intro finishes, Style playback shifts to the Main section. The length of the Intro (in measures) differs depending on the selected Style. MAIN This is used for playing the main part of the Song.
Style and Pattern Settings 5 Press the [INTRO/ENDING/rit.] button. INTRO≥A Now, you’re ready to start Style playback of the Intro and then the Main A (or B) section. 6 Style Synchro Stop When you press the [SYNC STOP] button to turn on this function, the Style will only play while pressing chords in the Auto Accompaniment area of the keyboard. Releasing all the notes will stop Style playback. Play a chord with your left hand to start playback of the Intro.
Style and Pattern Settings Pattern Variations—Sections Changing the Tempo Like the Styles, each Pattern features several Sections, allowing you to add dynamic variations to the performance. Five Sections (A–E) are provided. A Style or Pattern can be played at any tempo you desire—fast or slow. 1 Press the [TEMPO/TAP] button to call up the Tempo value in the display.
Style and Pattern Settings Adjusting the Volume of the Style or Pattern SplitPnt 054 009 You can adjust the volume balance between Style or Pattern playback and your keyboard performance. 1 2 Split Point Press the [FUNCTION] button. 3 Rotate the dial to set the Split Point between 036 (C1) and 096 (C6) (on the PSR-E453) or 028 (E0) and 103 (G6) (on the PSR-EW400). Use the CATEGORY [+] and [-] buttons to call up “StyleVol” (Function 001) or “PatrnVol” (Function 003). Split Point ...
Style and Pattern Settings Chord Types for Style Playback For users who are new to chords, this chart features common chords. Since there are many useful chords and many different ways to use them musically, refer to commercially available chord books for further details. indicates the root note.
Style and Pattern Settings 2-2. Looking Up Chords Using the Chord Dictionary The Dictionary function is useful when you know the name of a certain chord and want to quickly learn how to play it. 1 Press the key labeled “M7” in the section between “CHORD TYPE” and “ROOT.” The notes you should play for the specified chord (root note and chord type) are conveniently shown in the display, both as notation and in the keyboard diagram.
Song Settings BGM (Background Music) Playback Random Song Playback With the default setting, pressing the [DEMO] button will play back only a few of the internal Songs repeatedly. This setting can be changed so that, for example, all internal Songs are played, or all Songs transferred to the instrument from a computer are played back, letting you use the instrument as a background music source. Five playback group settings are provided. Simply select the one that suits your needs.
Song Settings This operation is same as that of the Style and Pattern. Refer to page 52. Tap Start This operation is same as that of the Style and Pattern. Refer to page 52. Melody Voice Setting of the Preset Song You can change the Melody Voice of the current Preset Song temporarily to any other desired Voice. 1 Press the [SONG] button, select the desired Preset Song, then start playback (page 28). 2 Press the [VOICE] button, then rotate the dial to select the desired Voice.
The Functions The “Functions” provide access to a range of detailed instrument parameters such as Tuning, Split Point, Voices and Effects. Find the desired item in the Function List on pages 58–61, then follow the instructions below. Basic Procedure in the Function Display 1 Press the [FUNCTION] button. To restore the default value, press the [+/YES] and [-/NO] buttons simultaneously.
The Functions Function Number PSRE453 Function PSREW400 Display Range/Settings Default Value Description Main Voice (page 20) 011 011 Volume M.Volume 000–127 * 012 012 Octave M.Octave -2 – +2 * Determines the octave range for the Main Voice. 013 013 Pan M.Pan * Determines the stereo pan position of the Main Voice. The value “0” results in the sound being panned full left; the value “127” results in the sound being panned full right. 014 014 Reverb Depth M.
The Functions Function Number PSRE453 Function PSREW400 Display Range/Settings Default Value Description DSP (page 48) 040 040 DSP Type DSP Type 01–10 041 041 DSP Part DSP Part 1 (Keyboard) 2 (Style) 01 1 (Keyboard) Refer to page 48. Harmony (page 23) 042 042 Harmony Type HarmType 01–26 * Determines the Harmony type. 043 043 Harmony Volume HarmVol * Determines the volume of the Harmony effect. * Determines the Arpeggio type.
The Functions Function Number PSRE453 Function PSREW400 Display Range/Settings Default Value Description Metronome (page 22) 059 059 Time Signature Numerator TimesigN 00–60 ** Determines the time signature of the Metronome. ** Determines the length of each metronome beat. 060 060 Time Signature Denominator Half note, Quarter TimesigD note, Eighth note, Sixteenth note 061 061 Metronome Volume MtrVol 000–127 100 Determines the volume of the Metronome.
USB Flash Drive Operations By connecting the USB flash drive (sold separately) to the [USB TO DEVICE] terminal, you can save the data created on this instrument, such as User Song and parameter settings. The saved data can be recalled to this instrument again for the future use. IMPORTANT • You should use an AC adaptor when executing USB flash drive operations, since battery power may not be reliable enough to last through these crucial operations.
USB Flash Drive Operations NOTE • Before using a USB flash drive, be sure to read “Precautions when using the [USB TO DEVICE] terminal” on page 62. • Messages may appear on the display during File Control procedures to aid in smooth operation. Refer to the Message List on page 69 for details. 1 Connect a USB flash drive to the [USB TO DEVICE] terminal, and wait until “USB” appears on the left corner of the display.
USB Flash Drive Operations Formatting a USB Flash Drive The Format operation lets you prepare commercially available USB flash drive for use with this instrument. NOTICE • The format operation overwrites any previously existing data. Make sure that the USB flash drive you are formatting does not contain important data. 1 2 Hold the [FUNCTION] button for longer than a second to call up the File Control display. Use the CATEGORY [+] and [-] buttons to call up “Format?.
USB Flash Drive Operations 5 Press the [0/EXECUTE] button again, or the [+/YES] button to execute the Save operation. Saving a User Song as SMF to a USB Flash Drive After a while, a message indicating completion of the operation appears, and a User file (.usr) will be saved in a “USER FILES” folder which will automatically be created on the USB flash drive. A User Song can be converted to SMF (Standard MIDI File) format 0 and saved to a USB flash drive.
USB Flash Drive Operations 5 Press the [0/EXECUTE] button again. A confirmation message will appear. To cancel the operation, press the [-/NO] button. Overwriting existing files If a file that already contains data is selected, an overwrite confirmation message will appear. 6 Press the [0/EXECUTE] button again, or the [+/YES] button to execute the Save operation.
USB Flash Drive Operations 6 Press the [FUNCTION] button to exit from the File Control display. 7 Check the loaded data by calling up the User Song, one of the Styles 221–230, and Registration Memory settings. 4 Press the [0/EXECUTE] button again. As the Load destination, “Load To? ***” (***: 221– 230) appears on the display. If desired, rotate the dial to select a different number.
USB Flash Drive Operations Deleting a User File in the USB Flash Drive Deleting an SMF File in the USB Flash Drive User Files (.usr) in the root directory of the USB flash drive can be deleted. You can delete a SMF file that has been saved in the USB flash drive via the Save SMF operation (page 65). IMPORTANT • Only User files (.usr) saved in the “USER FILES” folder on the USB flash drive can be deleted. Files outside this folder cannot be recognized.
USB Flash Drive Operations Message List Message To exit from the File Control display, press the [FUNCTION], [VOICE], [STYLE], [SONG] or [PATTERN] button. You can also exit from the File Control function mode as follows: 1 Use the CATEGORY [+] and [-] buttons to call up “Exit?.” Exit? 2 Comment Can’tUse • Indicates that the file control function is currently unavailable since the USB flash drive is being accessed. • Displayed when attempting to save a User Song recorded Pattern as SMF format 0.
Troubleshooting Appendix Problem Possible Cause and Solution When the instrument is turned on or off, a popping sound is temporarily produced. This is normal and indicates that the instrument is receiving electrical power. When the instrument is turned on, power is turned off suddenly and unexpectedly. This is normal. If an AC adaptor other than the one specified is used, power may be turned off suddenly and unexpectedly.
Specifications Product Name Dimensions (W x D x H) Size/Weight Weight Control Interface Other Controllers Display Panel Tone Generation Polyphony Voices Preset Number of Keys Touch Response Pitch Bend Wheel Knobs Type Language Language Tone Generation Technology Effects Functions Preset Accompaniment Styles Reverb Chorus Master EQ Harmony DSP Dual Split Arpeggio Melody Suppressor Number of Styles Fingering Style Control External Styles Other Features Music Database One Touch Setting (OTS) Compatib
Specifications Adaptor Power Supply Batteries Power Supply Power Consumption PA-150 or an equivalent recommended by Yamaha Six “AA” size alkaline (LR6), manganese (R6) or Ni-MH rechargeable batteries 8W (When using PA-150 AC adaptor) Auto Power Off Included Accessories Separately Sold Accessories (May not be available depending on your area.) • Owner’s Manual • Data List • AC adaptor* (PA-150 or an equivalent recommended by Yamaha) * May not be included depending on your area.
Index A E A-B Repeat ................................29 AC Adaptor ................................14 Accessories ...............................10 ACMP ........................................26 Arpeggio ..............................24, 49 Arpeggio Quantize ....................49 Arpeggio Type ...........................24 Arpeggio Velocity ......................60 Attack ..................................46, 59 Audio Device .............................36 Audio Loop Back .......................
Index T Tap Start ..............................52, 57 Tempo ...........................22, 52, 57 Time Signature ..........................22 Touch Response .......................42 Track ..............................29, 32, 51 Transpose ..................................41 Troubleshooting .........................70 Tuning ........................................44 U USB Flash Drive ........................62 USB TO DEVICE ......................62 USB TO HOST ..........................36 V Voice ....
MEMO PSR-E453/PSR-EW400 Owner’s Manual 75
OBSERVERA! Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den ar ansluten till vägguttaget, även om själva apparaten har stängts av. ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt, sålænge netledningen sidder i en stikkontakt, som er tændt — også selvom der er slukket på apparatets afbryder. Entsorgung leerer Batterien (nur innerhalb Deutschlands) Leisten Sie einen Beitrag zum Umweltschutz. Verbrauchte Batterien oder Akkumulatoren dürfen nicht in den Hausmüll.
LIMITED 1-YEAR WARRANTY ON PORTABLE KEYBOARDS (NP, NPV, PSRE, PSREW, EZ, DGX230, DGX530, YPG AND YPT SERIES) Thank you for selecting a Yamaha product. Yamaha products are designed and manufactured to provide a high level of defect-free performance. Yamaha Corporation of America (“Yamaha”) is proud of the experience and craftsmanship that goes into each and every Yamaha product.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. MALTA NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario M1S 3R1, Canada Tel: +1-416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A. Tel: +1-714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México, S.A. de C.V. Av. Insurgentes Sur 1647 Piso 9, Col.
Yamaha Global Site http://www.yamaha.com/ Yamaha Downloads http://download.yamaha.
