User Manual

PSR-I400 Owner’s Manual
48
Reference
The Functions
The “Functions” provide access to a range of detailed instrument parameters such as
Tuning, Split Point, Voices and Effects. Take a look at the Function List (pages 48–50).
When you find the desired Function you want to change, follow the instructions below.
Basic Procedure in the Function
Display
1
Find the desired item in the Function
List on pages 48–50.
2
Press the [FUNCTION] button.
3
Press the CATEGORY [+] and [-] buttons
several times until the desired item
appears.
4
Use the dial, the [+/YES] and [-/NO] but-
tons, or the [0]–[9] number buttons to
set the value of the selected function.
Some Function settings are maintained even if you
turn off the power, and can be transferred to the
computer as Backup Data (page 32).
Function List
StyleVol
100
001
Transpos
00
004
Current item
Direct
numeric entry.
Press simultane-
ously to recall the
default setting.
• Increment
value by 1.
•Execute
• Decrement
value by 1.
• Cancel
Function
Number
Function Display Range/Settings Default Value Description
Volum e
001 Style Volume StyleVol 000–127 100 Refer to page 42.
002 Song Volume SongVol 000–127 100 Refer to page 47.
003 Riyaz Volume RiyazVol 000–127 100 Refer to page 42.
Overall
004 Transpose Transpos -12–12 0 Refer to page 34.
005 Tuning Tuning
427Hz–453Hz
(in approximately
0.2Hz increments)
440.0Hz Refer to page 34.
006 Pitch Bend Range PBRange 01–12 2
Sets the range over which you can control pitch by using the
PITCH BEND wheel (page 34), in semitone increments.
007 Split Point SplitPnt 036–096 (C1–C6) 54 (F#2) Refer to page 43.
008 Touch Sensitivity TouchSns
1 (Soft), 2 (Medium),
3 (Hard), 4 (Off)
2 (Medium) Refer to page 35.
Main Voice (page 16)
009 Volume M.Volume 000–127 * Determines the volume of the Main Voice.
010 Octave M.Octave -2 – +2 * Determines the octave range for the Main Voice.
011 Pan M.Pan L63–C–r63 *
Determines the stereo pan position of the Main Voice. A value of
“L” results in the sound being panned full left, while a value of “r”
results in the sound being panned full right.
012 Reverb Depth M.Reverb 000–127 *
Determines how much of the Main Voice’s signal is sent to the
Reverb effect.
013 Chorus Depth M.Chorus 000–127 *
Determines how much of the Main Voice’s signal is sent to the
Chorus effect.
014 Attack Time M.Attack 000–127 64
Determines how fast the volume of the Main Voice reaches the Attack
level when the note is pressed. The larger the value, the faster the
attack rate. The smaller the value, the slower the attack rate.