User Manual

USB Flash Drive Operations
PSR-I400 Owner’s Manual
52
Reference
Connecting a USB Flash Drive
1
Connect a USB Flash Drive to the [USB
TO DEVICE] terminal, being careful to
insert it with the proper orientation.
2
Wait until “USB” appears on the left cor-
ner of the display.
The “USB” indication confirms that the connected
USB Flash Drive has been mounted or recognized.
3
Hold down the [FUNCTION] button to
call up the File Control display.

If “UnFormat” followed by “Format?”
appears:
This indicates that the connected USB Flash
Drive has not been formatted, and cannot be
mounted or recognized. Execute the Format
operation by following the instructions starting
with Step 2 on page 53.
4
Rotate the dial to call up the desired File
Control function, then execute it.
For details, refer to the table below.
Harmnum1
Load STY
Hold for longer
than a second.
Display File Control function Page
Load STY Loading a Style File 57
Load USR
Loading User Data from a
USB Flash Drive
56
Save SMF
Saving a User Song as SMF
to a USB Flash Drive
55
Save USR
Saving User Data to a USB
Flash Drive
54
Del SMF
Deleting a SMF File in a USB
Flash Drive
58
Del USR
Deleting a User File in a USB
Flash Drive
58
Format? Formatting a USB Flash Drive 53
Exit?
Exiting from a File Control
display
59
Messages may appear on the display during
File Control procedures to aid in smooth oper-
ation. Refer to the Message List on page 59
for details.
• No sound will be produced if the keyboard is played
while the file control display is showing, and only buttons
related to File Control operations will be active.
The File Control display cannot be called up in the follow-
ing situations.
• During playback of Style, Riyaz, or Song
• When “USB” does not appear even if you have con-
nected a USB Flash Drive to the [USB TO DEVICE]
terminal.
NOTE
NOTE