User Manual

USB Flash Drive Operations
PSR-I400 Owner’s Manual
59
Reference
Exiting from a File Control display
To exit from the File Control display, press the
[VOICE], [STYLE], [RIYAZ], [SONG], [FUNC-
TION], or [HARMONIUM/PIANO] button.
You can also exit from the File Control function mode
as follows:
1
Use the CATEGORY [+] and [-] buttons to
call up “Exit?.”
2
Press the [0/EXECUTE] button to exit
from the File Control display.
Exit?
Message Comment
Can’t Use
Indicates that the file control function is cur-
rently unavailable since the media is being
accessed.
Complet.
Indicates the specified job completion such as
data saving and transmission.
Data Err
Displayed when the user Song contains illegal
data.
Disk Ful
Displayed when saving data cannot be exe-
cuted since the media memory becomes full.
Error
Displayed when a file error or operational error
occurs.
File Ful
Indicates that SMF Songs cannot be dis-
played since the total number of files exceeds
the capacity.
no data There is no data to save in the flash memory.
no file
There is no file to load or delete from the
media.
Communication with the USB device has been
shut down because of the overcurrent to the
USB device. Disconnect the device from the
[USB TO DEVICE] terminal, then turn on the
power of the instrument.
Protect
Displayed when trying to save or delete data
on a protected media, or format a protected
media. Set protect to off and try again.
UnFormat
Displayed when connecting an unformatted
media.
UseAdpt
USB Flash Drive save, delete, and format
operations cannot be performed when the
instrument is being powered from battery. Use
an AC adaptor.
0ur