DIGITAL WORKSTATION Owner’s Manual Before using the instrument, be sure to read “PRECAUTIONS” on pages 4-5.
SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind.
COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party : Yamaha Corporation of America Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620 Telephone : 714-522-9011 Type of Equipment : Digital Keyboard Model Name : PSR-S650 This device complies with Part 15 of the FCC Rules.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, shortcircuiting, damages, fire or other hazards.
NOTICE To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below. Handling and Maintenance • Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.
Formats The instrument is compatible with the following formats. GM System Level 2 XF “GM (General MIDI)” is one of the most common Voice allocation formats. “GM System Level 2” is a standard specification that enhances the original “GM” and improves Song data compatibility. The Yamaha XF format enhances the SMF (Standard MIDI File) standard with greater functionality and open-ended expandability for the future.
Contents Supplied Accessories................................................. 5 Formats...................................................................... 6 About the Manuals ..................................................... 6 Panel Controls and Terminals Setting Up 8 5 Playing with the Music Database 46 6 Mixer 47 7 Memorizing Your Favorite Panel Settings 49 10 Memorizing the Panel Settings................................ 50 Recalling the Memorized Panel Settings.................
Panel Controls and Terminals Front Panel q e w r t i y !1 !2 !3 !4 u o !0 !5 @4 Front Panel q [ ] (Standby/On) switch .................... page 11 Turns the instrument’s power on or Standby. w MASTER VOLUME control .................. page 11 Adjusts the overall volume. e [DEMO] button......................................page 37 Plays the Demo. r [SONG MODE] button ..........................page 35 Switches between Song mode and Style mode. t SONG buttons ...............................
Panel Controls and Terminals NOTE • The panel controls q–@4 call up the related displays, all of which are listed in the Panel Button Chart on page 65. !6 @1 !7 !8 !9 @0 @2 @3 Rear Panel @5 @6 @7 @8 @9 #0 Rear Panel !7 [MDB] button ........................................page 46 Calls up the appropriate panel settings for the desired music genre. !8 [FILE MENU] button .............................page 55 Executes file operations such as loading and saving. !9 [FUNCTION] button ..............
Setting Up Be sure to do the following operations BEFORE turning on the power. Make all necessary connections below BEFORE turning the power on. Auto Power Off Function Power Requirements WARNING • Use the specified adaptor (page 70). The use of other adaptors may result in irreparable damage to both the adaptor and the instrument. 1 Connect one end of the AC cable to the power adaptor.
Setting Up Connecting Headphones and External Audio Equipment Turning the Power On Turn down the volume by turning the MASTER VOLUME control to the left and press the [ ] (Standby/ On) switch to turn on the power. While playing the keyboard, adjust the volume level by using the MASTER VOLUME control. Press the [ ] (Standby/On) switch again for a second to turn the power to standby.
Setting Up Changing the Display Language This instrument allows you to select English or Japanese as the display language. The default display language is English, but if you switch to Japanese the lyrics, file names and some messages will be displayed in Japanese where appropriate. Adjusting the Display CONTRAST control Adjust the display CONTRAST control on the rear panel of the instrument for optimum display legibility. 1 Press the [FUNCTION] button.
Setting Up Displays and Basic Operation Main Display The Main display, called up when the power is turned on, shows all of the current basic settings: Song, Style, Voice. It also includes a range of indicators that show the on/off status of a range of functions. Transpose Measure number Octave (page 20) (page 43) (page 20) USB status Appears when the USB flash memory is connected (page 55). A-B Repeat Tempo Appears when the Repeat function is on for Song playback.
Setting Up VOICE, STYLE, SONG, and MDB Select Displays Press one of the category selection buttons such as VOICE, STYLE, SONG, or press the [MDB] button to call up selection display for each. In each display, you can select an item as desired using the CATEGORY buttons or the dial. Previous category Next category Category Item Select a Category Use the CATEGORY [<] and [>] buttons to step in sequence through the categories.
Setting Up Function Display In the Function display, you can make detailed settings for this instrument. The Function display appears when the [FUNCTION] button is pressed. In the display you can use the CATEGORY [<] and [>] buttons to select 60 different function items. Press the CATEGORY button(s) as many times as necessary until the required function appears, then use the dial or the [-/NO] and [+/YES] buttons to adjust the value of the function as required.
1 Voices – Playing the Keyboard – In addition to piano, organ, and other standard keyboard instruments, this instrument has a large range of realistic Voices—including guitar, bass, strings, sax, trumpet, drums and percussion, sound effects, and a wide variety of other musical sounds. Select and Play a Main Voice In this operation, you’ll select a Main Voice and play it on the keyboard. 1 Select and press the desired Voice category button in the Voice section.
1. Voices – Playing the Keyboard – Playing Two Voices Simultaneously Once you press the [DUAL] button to turn the Dual Voice on, a second voice will sound that will play in addition to the Main Voice when you play the keyboard. The second voice is known as the “Dual Voice.” NOTE • The Dual Voice parameters such as Voice Volume can be set in the Function display. For details, refer to the Reference Manual. The button lights when Dual is ON. Two Voices will sound at the same time.
1. Voices – Playing the Keyboard – Playing Drum Kits Drum Kits are collections of drum and percussion instruments. When you select a violin or other normal instrument—as a Main Voice, for example—all keys produce the sound of the same violin, only at different pitches. If you select a Drum Kit as the Main Voice, however, each key produces the sound of a different drum or percussion instrument. 1 Press the [DRUM KIT] button. The “Drum Kit” category appears.
1. Voices – Playing the Keyboard – Applying Effects to a Voice You can apply effects to a Voice played on the keyboard by pressing the Voice Control buttons. To turn the effect off, press the button again. NOTE • You can specify the Harmony type. For details, refer to the Reference Manual. The button lights when DSP is ON. Adding Harmony This feature adds harmony notes as well as tremolo or echo effects to the Main Voice. A suitable Harmony type is automatically selected when you select a Main Voice.
1. Voices – Playing the Keyboard – Changing the Pitch of the Instrument Using the Pitch Bend Wheel The Pitch Bend wheel can be used to add smooth pitch variations to notes you play on the keyboard. NOTE • The pitch bend range can be changed by setting the “PB Range” parameter on the Function display. For details, refer to the Reference Manual. Adjusting the pitch in semitones (Transpose) The overall pitch of the instrument can be shifted up or down in semitones by pressing the TRANSPOSE [+]/[-] buttons.
1. Voices – Playing the Keyboard – Fine-tuning the Pitch of the Entire Instrument You can fine-tune the pitch of the entire instrument by a maximum of 1 semitone—useful when you play this instrument along with other instruments or CD music. 1 Press the [FUNCTION] button to call up the Function display. 2 Press the CATEGORY [<] and [>] buttons as many times as necessary to call up “Tuning.” NOTE • This setting does not affect the Drum Kit Voices.
1. Voices – Playing the Keyboard – Scale Tuning By default, this keyboard scale is set to Equal Temperament—the same tuning as with any acoustic piano. However, the setting can be changed to any other scale according to the music genre or music style you want to play. Selecting a Scale You can select various scales for playing in custom tunings for specific historical periods or music genres.
1. Voices – Playing the Keyboard – Setting the Base Note for Each Scale When the base note is changed, the pitch of the keyboard is transposed, yet the original pitch relationship between the notes is maintained. Please make sure to specify the appropriate Base Note, if you select a scale other than Equal Temperament, or create an original scale via Scale Tune function. Press the [FUNCTION] button then use the CATEGORY [<] and [>] buttons as many times as necessary to select the “Base Note.
1. Voices – Playing the Keyboard – 4 5 Repeat steps 2–3 to tune any of the remaining notes. Memorize the settings here to the Registration Memory as desired (page 50). Selecting a Part for Scale Tune With the initial settings, Scale Tune is applied only to the Main/Dual Voices, not to the Left Voice and Style playback. If you want to apply this setting to the Left Voice or Style playback as well as the Main/Dual Voices, follow the instructions below.
1. Voices – Playing the Keyboard – 4 Rotate the dial to select ON (apply) or OFF (not apply), then press the [EXECUTE] button. The highlighted area will return to Part Select again. Repeat steps 3–4 as desired. ON/OFF status 5 Memorize the settings here to the Registration Memory as desired (page 50). Applying Scale Tune MIDI Messages to the Keyboard Performance You can apply Scale Tune MIDI messages received from an external MIDI device to the keyboard performance.
1. Voices – Playing the Keyboard – 3 Rotate the dial to select ON (KEYBOARD). With the default setting of “OFF,” MIDI messages are applied to Song channels 1–16, not to the keyboard performance. If you set this to “ON (KEYBOARD),” the MIDI messages are applied to the keyboard performance as follows: Channel 1 = Main Voice, Channel 2 = Dual Voice, and Channel 3 = Left Voice; the other channels are not affected.
1. Voices – Playing the Keyboard – Using the Metronome Playing the Metronome The metronome provides a click sound, giving you an accurate tempo guide when you practice, or letting you hear and check how a specific tempo sounds. Press the [METRONOME] button to start the metronome. To stop the metronome, press the [METRONOME] button again. Time Signature Beat Number Setting the Time Signature and Tempo Normally, the metronome time signature and tempo will be determined by the current Style or Song.
1. Voices – Playing the Keyboard – 3 Press the CATEGORY [>] button once to call up the Time Signature Denominator display. 3 4 Use the dial to select a beat length. Select the required length for each beat: 2, 4, 8, or 16 (half note, quarter note, eighth note, or 16th note). For this example, select 4. The time signature should now be set to 3/4. 4 Press the [METRONOME] button to confirm the settings. 5 Use the TEMPO [+] and [-] buttons to set the tempo.
2 Styles – Playing Rhythm and Accompaniment – This instrument includes the Auto Accompaniment feature that plays appropriate “Styles” (rhythm + bass + chord accompaniment) when you play left-hand chords. You can select from a huge variety of Styles covering a wide range of musical genres. Select and Play a Style 1 Select and press the desired Style category button. The Style selection display appears. The current category name, Style number and name will be highlighted.
2. Styles – Playing Rhythm and Accompaniment – NOTE When the Auto Accompaniment is on... The area of the keyboard to the left of the split point (F#2) becomes the Auto Accompaniment range and is used only for specifying the Accompaniment chords. • The Split Point can be changed in the Function display. For details, refer to the Reference Manual. Split Point (F#2) Auto Accompaniment range 4 Press the [AUTO FILL IN] button to turn Auto Fill In on. The initial setting is “on.
2. Styles – Playing Rhythm and Accompaniment – 7 Press one of the INTRO [I]–[III] buttons. The selected Intro button lights. 8 Play a chord in the Auto Accompaniment range to start the Intro section. Try playing a C major chord. (See “Playing Auto Accompaniment Chords” on page 32.) NOTE • The Baroque Air Style in the MOVIE & SHOW category does not have a Rhythm part, and so does not produce any rhythm sound.
2. Styles – Playing Rhythm and Accompaniment – Playing Auto Accompaniment Chords For users who are unfamiliar with chords, this handy chart features common chords for your quick reference. Chords recognized by this instrument are described in the Reference Manual on the website. Indicates the root note.
2. Styles – Playing Rhythm and Accompaniment – Synchro Stop When this function is selected, the accompaniment Style will only play while you are holding down chords in the Accompaniment range of the keyboard. Style playback will stop when you release the keys. To turn the function on, press the [SYNC STOP] button. To turn the function off, press the button again.
2. Styles – Playing Rhythm and Accompaniment – Changing the Tempo You can use the TEMPO [+] and [-] buttons to adjust the playback tempo as required before or during playback. While the TEMPO pop-up is shown on the display, you can also use the dial to adjust the value. Pressing the TEMPO [+]/[-] buttons simultaneously resets the tempo to the default value. or The Tempo can also be changed during playback by tapping the [TAP TEMPO] button twice at the desired tempo.
3 Using Songs With this instrument, the term “Song” refers to the data that makes up a piece of music. In this section we’ll learn how to select and play a Song. Selecting and Listening to a Song 1 Press the desired Song category button. The Song selection display will appear. The currently selected Song number and name will be highlighted. Song Selection display Currently selected Song [PRESET] : Nine preset Songs are available here.
3.
3. Using Songs Listening to the Demo Song This instrument includes a Demonstration Song, showcasing the wide variety of the Preset Voices. Press the [DEMO] button to start the Demo. The Demo displays appear in the display. The Demo Song will restart when playback reaches the end. You can stop playback at any time by pressing the [DEMO] or [ ] button. You can change the repeat playback target from Demo Song to other Songs such as Preset Songs.
3. Using Songs Displaying the Song Score This instrument is capable of displaying the scores (notation) of Songs, including the preset Songs as well as Songs loaded from a USB flash memory or computer. 1 Select a Song. Follow steps 1 and 2 on page 35. 2 Press the [SCORE] button and a single-staff score will appear. There are two types of score display: single-staff and double-staff. These are alternately selected each time the [SCORE] button is pressed.
3. Using Songs A-B Repeat You can specify a section of a Song—“A” is the start point and “B” is the end point—for repeat playback. The AB Repeat function is also very convenient for practicing when used along with the score display features of the instrument. A 1 B Play the Song (page 35) and press the [ ] button at the beginning of the section you want to repeat (the “A” point). Point A 2 Press the [ ] button again at the end of the section you want to repeat (the “B” point).
4 Recording Your Own Performance You can record up to five of your own performances and save them as User Songs 001 through 005. These Songs can be played in the same manner as the Preset Songs. Once your performances have been saved as User Songs, they can be saved to a USB storage device (page 58). Recordable data Melody performance and Style playback with chord or section changes can be recorded to any 16 tracks of the Song. Recording methods • Quick Recording .......
4. Recording Your Own Performance 2 3 Play the keyboard to start recording. Stop recording by pressing the [ ] or [REC] button. or 4 Press the [+/YES] button to save the recorded Song. When recording is stopped, a message asking if you want to save the Song will appear. Press the [+/YES] button to save the Song, or the [-/NO] button if you don’t want to save. If the [+/YES] button is pressed, the Song will be saved as a MIDI file to the User Song selected in step 1.
4. Recording Your Own Performance Assigning the Style Part If you want to record the Style playback, hold the [REC] button then immediately press the [ACMP] button. On the panel, the [REC] and [ACMP] buttons will light and the [START/STOP] button will flash, indicating that Record Ready mode is enabled with the Auto Accompaniment on. On the display, the REC indication will be highlighted, indicating that the Style Part will be assigned to Tracks 9–16 for recording.
4. Recording Your Own Performance 3 Play the keyboard to start recording. You can also start recording by pressing the [ ] button to play only the rhythm. When recording is started, the display automatically returns to the Main display, showing the current measure number. Current measure number NOTE • When Song memory becomes full, a message appears in the display and recording will be stopped.
4. Recording Your Own Performance Song Clear—Deleting User Songs NOTE This function clears an entire user Song (all tracks). 1 Press the [USER] button, then rotate the dial to select the user Song (001 to 005) you want to clear. Press the [EXIT] button to return to the Main display. 2 While holding the TRACK [8/16] button, press and hold the TRACK [1/9] button for longer than a second. Hold for longer than a second Press and hold A confirmation message will appear on the display.
4. Recording Your Own Performance Track Clear—Deleting a Specified Track From a User Song This function lets you delete a specified track from a User Song. 1 Press the [USER] button and rotate the dial to select the desired Song (001 to 005), then press the [EXIT] button to return to the Main display. 2 Press the [REGIST/PART [MIXER]] button a few times to call up the desired item, “TR 1-8” or “TR 9-16.” 3 Press and hold the desired track button ([1/9] to [8/16]) for longer than a second.
5 Playing with the Music Database If you want to play music in your favorite Style, but you’re not sure how to select the best Voice and Style for the type of music you want to play, simply select the appropriate Style from the Music Database. The panel settings will automatically be adjusted for the ideal combination of sounds and Style! 1 Press the [MDB] button. The music database selection display will appear. The currently selected category name, MDB number and name will be highlighted.
6 Mixer This instrument has a Mixer feature that lets you control on/off settings for each track, or adjust the Volume, Pan, Reverb Level and Chorus Level for each track during Song or Style playback. By editing these parameters, you can change the feeling of the Song or Style. Tracks [1]–[16] can be set for Song playback, and [9]–[16] for Style. 1 2 Select the Style or Song. Press and hold the [REGIST/PART [MIXER]] button for longer than a second so that the Mixer display appears.
6. Mixer 7 8 Volume Determines the Part volume. Range: 0–127 Pan Determines the Pan position. Range: 0–64–127 Reverb Level Determines the Reverb depth. Range: 0–127 Chorus Level Determines the Chorus depth. Range: 0–127 Repeat steps 4–6 to set other tracks if necessary. Save the settings here as Style data or Song data. You can select either USB flash memory or internal memory as the save destination.
7 Memorizing Your Favorite Panel Settings The Registration Memory feature lets you memorize your favorite panel settings for easy recall whenever they are necessary. Up to 64 complete setups (8 Banks of 8 setups each) can be memorized. 8 Banks Memory 1 Memory 2 Memory 3 Memory 4 Memory 5 Memory 6 Memory 7 Memory 8 When using Registration Memory, press the [REGIST/PART [MIXER]] button repeatedly until “REGIST” is highlighted at the right bottom of the Main display.
7. Memorizing Your Favorite Panel Settings Memorizing the Panel Settings 1 2 Make the panel settings (page 49) as desired. Press the REGIST BANK [-]/[+] buttons to select the desired Bank. As shown below, the REGIST display appears. The dial can also be used to change values. NOTE • The panel settings cannot be memorized during Song playback. Bank number 3 While holding the [MEMORY] button, press one of the unlit Registration Memory [1]–[8] buttons.
7. Memorizing Your Favorite Panel Settings 3 Press one of the green-lit Registration Memory [1]–[8] buttons. The color of the pressed button will changed from green to red, indicating that the memorized panel settings have been called up. NOTE • Harmony ON/OFF setting may not be recalled, or may be automatically turned off when the Chord Fingering type is set to “FullKeyboard.
7. Memorizing Your Favorite Panel Settings Registration Clear—Deleting the Specified Registration Memory 1 On the Main display, press the [REGIST/PART [MIXER]] button repeatedly until “REGIST” is highlighted (page 49). 2 Press the REGIST BANK [-]/[+] buttons to select the desired Bank. As shown below, the REGIST display appears. The dial can also be used to change values. Bank number 3 Press and hold one of the lit Registration Memory [1]–[8] buttons.
8 Initialization Backup Data and Memory Data The following settings are always backed up, and are maintained even when the power is turned off. If you want to initialize the settings (restoring the factory programmed settings), use the Initialize operation as explained below.
9 Using USB Flash Memory When a USB storage device is inserted in this instrument’s USB TO DEVICE terminal, User Songs and User Styles created on the instruments and memorized settings can be saved to or loaded from the device individually. Precautions when using the [USB TO DEVICE] terminal This instrument features a built-in [USB TO DEVICE] terminal. When connecting a USB device to the terminal, be sure to handle the USB device with care. Follow the important precautions below.
9. Using USB Flash Memory File Control Display USB flash memory operations, such as Save and Load can be performed from the FILE CONTROL display. 1 3 Press the [FILE MENU] button to call up the FILE CONTROL display. Connect a USB flash memory to the USB TO DEVICE terminal, being careful to insert it in the proper direction. If the file control functions are accessed while an unformatted USB flash memory is connected to the instrument, the “Format” function will automatically be selected.
9. Using USB Flash Memory Formatting USB Flash Memory A new USB flash memory must be formatted before it can be used by this instrument. NOTICE • If you format a USB flash memory that already contains data, all of the data will be erased. Be careful not to erase important data when using the format function. 5 When the operation is complete, a “Completed” message appears briefly, then returns to the display of step 2. Press the [EXIT] button to exit from the FILE CONTROL display.
9. Using USB Flash Memory Saving the Registration Memory All 64 setups memorized to the Registration Memory can be saved to the USB flash memory as a single file (extension: usr). 1 2 Make sure that a formatted USB flash memory has been properly connected to the USB TO DEVICE terminal, then call up the FILE CONTROL display (page 55). Cursor left Cursor right Delete character Select characters Use the CATEGORY [<] and [>] buttons to select “Regist Save.
9. Using USB Flash Memory Saving a User Song or User Style This operation saves one of the User Songs (001–005) as a SMF File (extension: mid), or one of the User Styles as a Style File-formatted file (extension: sty). What is SMF (Standard MIDI File)? 5 Press the [EXECUTE] button. A cursor will appear below the first character in the file name. 6 Change the Destination file name as necessary. For details, refer to step 4 on page 57.
9. Using USB Flash Memory Loading a File Registration files (extension: usr), Style files (extension: sty), Song files (extension: mid) and MDB files (extension: MFD) saved to the USER FILE folder in the USB flash memory can be loaded to the instrument individually. 6 When the operation is complete, a “Completed” message appears briefly, then returns to the display of step 2. Press the [EXIT] button to exit from the FILE CONTROL display. 7 Check that the file is properly loaded.
9. Using USB Flash Memory Deleting Data from USB Flash Memory This procedure deletes Registration files, Song files and Style files in the USB flash memory. The files to be deleted must be located inside the “USER FILES” folder on the USB flash memory. 1 2 Make sure that a formatted USB flash memory has been connected to the USB TO DEVICE terminal, then call up the FILE CONTROL display (page 55). Use the CATEGORY [<] and [>] buttons to select “USB Delete.
10 Expanding Voices and Styles (Installing to the Expansion Category) Installing an Expansion Pack (Extension: yep) lets you add a variety of optional Voices and Styles to each Expansion category. The installed Voices and Styles can be selected like Preset Voices and Styles, allowing you to expand your music performance and creation possibilities. Expansion Packs as sample can be downloaded from the PSR-S650 page within Yamaha Web Site (http:// www.yamaha.com/).
10. Expanding Voices and Styles (Installing to the Expansion Category) Confirm the Information of the Expansion Pack Deleting the Expansion Voice or Style You can confirm the information of the currently installed Expansion Pack on the display. This operation deletes all the installed Voices or Styles in the Expansion category, and initializes the corresponding memory area. 1 2 3 62 Press the [FILE MENU] button. NOTICE Use the CATEGORY [<] and [>] buttons to select “Expansion Pack Information.
11 Connecting to a Computer Connecting the instrument to a computer via a USB cable offers the following useful possibilities: • The instrument’s performance data can be recorded with DAW software on the computer, and the performance data from the computer can be played on the instrument, since the connection allows you to transmit/receive MIDI messages to/from a computer.
Appendix Appendix Troubleshooting Problem Possible Cause and Solution Power suddenly and unexpectedly turns off. This is normal and the Auto Power Off function may have been activated (page 10). If desired, disable the Auto Power Off function. When the instrument is turned on or off, a popping sound is temporarily produced. This is normal and indicates that the instrument is receiving electrical power. When using a mobile phone, noise is produced.
Appendix Panel Button Chart The below chart lists the buttons/controllers on the panel and the corresponding displays that are called up. Numbers at the left end correspond to the ones in “Panel Controls and Terminals” (page 8). “” indicates that the detailed information is described in the Reference Manual (downloadble from website). No.
Appendix No.
Appendix Messages Message Description Opening Access Error! The backup data was not recalled properly when turning on the power. General Access Error! Indicates the failure in reading or writing from/to the media, USB flash memory or the internal flash memory. Media is not inserted. Displayed when accessing the media while it is not inserted. Media is not inserted. Please connect the USB flash memory to the USB TO DEVICE terminal, or change the save destination to internal memory.
Appendix Message Description Score The song data is too large to be converted to notation. Indicates that the score cannot be displayed since the Song data is too large. The notation cannot be displayed, since this song is not allowed to display the notation. The notation cannot be displayed, since this Song is not allowed to display the notation. File Control Since the media is in use now, this function is not available.
Appendix Specifications Size/Weight Dimensions WxDxH Weight Keyboard Display 946 x 405 x 137 mm (37-1/4" x 15-15/16" x 5-3/8") 7.3Kg (16 lbs. 1 oz.) Number of Keys 61 Touch Response Yes Type 320 x 240 dots QVGA B/W 4.
Appendix Preset Custom Song Recording Number of Preset Songs 9 User Songs Yes Song Edit Yes Number of Songs 5 Tracks 16 Data Capacity Approx.
Appendix Index +/YES, -/NO ...............................................................14 .............................................................................36 o ............................................................................. 36 ......................................................................... 39 f ........................................................................... 36 r ...........................................................................
Appendix Music Rest ..................................................................12 O Octave ..........................................................................20 One Touch Setting (OTS) ..........................................34 OTS LINK ...................................................................34 P Panel Button Chart ..................................................... 65 Panel Controls and Terminals ......................................8 Panel settings ........................
1-YEAR LIMITED WARRANTY ON ARRANGER WORKSTATION KEYBOARDS Thank you for selecting a Yamaha product. Yamaha products are designed and manufactured to provide a high level of defect-free performance. Yamaha Corporation of America (“Yamaha”) is proud of the experience and craftsmanship that goes into each and every Yamaha product.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante.
Yamaha Global Home http://www.yamaha.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Digital Musical Instruments Division © 2011 Yamaha Corporation ***POTY*.
