manual

PSR-S670 Reference Manual 15
1
Voices
2 VIBRATO
Vibrato is a quavering, vibrating sound effect that is produced by
regularly modulating the pitch of the Voice.
 EFFECT Page
1 REVERB DEPTH/CHORUS DEPTH/DSP DEPTH/PANEL SUSTAIN
2 DSP
 HARMONY/ARP Page
Same as the display called up via [FUNCTION]  TAB [E] MENU 1  Cursor buttons [][][E][F]
HARMONY/ARPEGGIO  [ENTER], with the exception of the following points:
• The parameters set via the [7 ] (DETAIL) buttons are shown on the top of the display.
•The [8] (COMPARE) and [8 ] (SAVE) buttons are available (see steps 4–5 on page 12).
[3 ] DEPTH Determines the intensity of the Vibrato effect. Higher settings result in a
more pronounced Vibrato.
[4 ] SPEED Determines the speed of the Vibrato effect.
[5 ] DELAY Determines the amount of time that elapses between the playing of a key
and the start of the Vibrato effect. Higher settings increase the delay of the
Vibrato onset.
[1 ]/
[2 ]
REVERB
DEPTH
Adjusts the reverb depth.
[3 ]/
[4 ]
CHORUS
DEPTH
Adjusts the chorus depth.
[5 ] DSP ON/OFF Determines whether the DSP effect is on or off.
This setting can also be made from the VOICE EFFECT [DSP] button on
the panel.
[6 ] DSP DEPTH Adjusts the DSP depth.
If you want to re-select the DSP type, you can do so in the “2 DSP” menu
explained below.
[7 ] PANEL
SUSTAIN
Determines the sustain level applied to the edited Voice when the sustain
effect is on. The sustain effect is turned on/off from the display below.
[FUNCTION]  TA B [E] MENU 1  Cursor buttons [][][E][F]
V
OICE SETTING  [ENTER]  TAB [E] VOICE CONTROL
[1 ]/
[2 ]
CATEGORY Selects the DSP effect category and type. Select a type after selecting a
category.
[3 ]/
[4 ]
TYPE
[6 ] VARI. ON/OFF Turns the DSP Variation on or off for the selected Voice. This setting
can also be made from the VOICE EFFECT [DSP VARI.] button on the
panel.
[5 ]/
[7 ]
DETAIL Calls up a detailed setting display. Press the [5 ] button for editing
the standard parameter value, and the [7 ] button for editing the
Variation parameter value.
[2 ]
–[4 ]
PARAMETER Selects the DSP variation parameter to be set.
[5 ]
/[6 ]
VALUE Adjusts the value of the DSP variation parameter.
Pitch
DELAY
SPEED
DEPTH
Time