manual

PSR-S670 Reference Manual 17

Voices

1 Call up the operation display.

[FUNCTION]  TA B [E] MENU 1  Cursor buttons [][][E][F] VOICE SETTING  [ENTER]

 TAB [E] VOICE CONTROL

2 Use the [1 ]–[8 ] buttons to make settings for each parameter.

Changing detailed Voice settings (Touch Response, Sustain,

Mono/Poly)

[1 ]/

[2 ]

TOUCH

RESPONSE

Turns the Touch Response of the keyboard on or off. When this is set to

off, the same volume is produced no matter how strongly or softly you

play the keyboard.

On the display called up via the following operations, you can you can

change the Touch Response type. For details, refer to the Owner’s Man-

ual.

[FUNCTION]  TA B [E] MENU 1  Cursor buttons [][][E][F]

CONTROLLER  [ENTER]  TAB [F] KEYBOARD/PANEL

[3 ]/

[4 ]

SUSTAIN Turns the Sustain function on/off. When this is set to on, all notes played

on the keyboard with right-hand part (RIGHT 1 and 2) have a longer sus-

tain.

[5 ]/

[6 ]

PART SELECT Selects the keyboard part to which the MONO/POLY setting (below) is

applied.

[7 ]/

[8 ]

MONO/POLY Determines whether the Voice of the keyboard part selected above is

played monophonically or polyphonically. When MONO is selected, the

part’s Voice is played monophonically (only one note at the time) with last

note priority, letting you play single, lead sounds such as brass instru-

ments more realistically. Depending on the Voice, Portamento may be

produced when notes are played with legato. When POLY is selected, the

part’s Voice is played polyphonically.

NOTE Portamento is a function that creates a smooth transition in pitch from the first note played on the

keyboard to the next.