manual

PSR-S670 Reference Manual 35

Styles

1 In the CHANNEL page, use the Cursor buttons [][] to select the edit menu.

1 QUANTIZE

Same as in the Song Creator (page 54), with the exception of the two additional available parameters below.

2 VELOCITY CHANGE

Boosts or cuts the velocity of all notes in the specified channel, according to the percentage specified here.

3 BAR COPY

This function allows data to be copied from one measure or group of measures to another location within

the specified channel.

4 BAR CLEAR

This function clears all data from the specified range of measures within the selected channel.

5 REMOVE EVENT

This function lets you remove specific events from the selected channel.

2 Use the [2 ] (CHANNEL) buttons to select the channel to be edited.

The selected channel is shown at the upper left of the display.

3 Use the [3 ]–[7 ] buttons to edit the data.

4 Press the [ENTER] button to actually enter the edits for each display.

After the operation is completed, “UNDO -> [ENTER]” is displayed. You can restore the original data if

you are not satisfied with the results of the edit by pressing the [ENTER] button. The Undo function only

has one level; only the previous operation can be undone.

5 Save the edited Style (step 8 on page27).

NOTICE

The edited Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save operation.

[4 ] TOP Specifies the first (TOP) and last (LAST) measures in the region to be

copied.

[5 ]LAST

[6 ] DEST Specifies the first measure of the destination location, to which the data is

to be copied.

Sixteenth notes with swing

Eighth notes with swing