manual

40 PSR-S670 Reference Manual
2
Styles
Editing the Rhythm Part of a Style (Drum Setup)
The Drum Setup function allows you to edit the rhythm part of the current Style, such as changing the drum
instruments and make various settings. The procedure below applies to step 6 in the Basic Procedure on
page 27.
1 From the BASIC page, press [1 ] (REC CH) button to call up the REC CHANNEL
display in the lower half section of the display.
2 Hold down the [1 ] or [2 ] button corresponding to the desired channel to be
edited.
NOTE If the different drum sounds are assigned to each section of the selected channel, the sounds are set to that of the current section in order to use the Drum
Setup function.
3 Use the Cursor buttons [][] to select “3 RHY CLEAR/CH DELETE/DRUM SETUP,”
then press one of the [6 ]/[7 ] (DRUM SETUP) buttons to call up the Drum
Setup display.
The DRUM SETUP window is displayed.
4 If necessary, press the STYLE CONTROL [START/STOP] button to start playback of
the rhythm part.
The sounds played back are indicated on the display keyboard, letting you to check the note to edit.
5 Use the [1 ]/[2 ] (NOTE) buttons to select the note to edit.
NOTE You can also select the note by pressing the note on the keyboard.
2
56 78 3