manual

70 PSR-S670 Reference Manual

Mixing Console

Move the Cursor on the display by using the Cursor buttons [][][E][F], and use 1the [1 ]–[8 ]

buttons to edit parameters.

VOICE Allows you to re-select the Voices for each part. Press the [1 ]–[8 ] buttons to

call up the Voice selection page for the channel (part). After selecting the desired

Voice, press the [EXIT] button to return to the Mixing Console display.

NOTE Note the following operation limitations.

• For each Style channel, you can select the Voices for recording on pages 28 and 29.

• For each Style or Song channel, you cannot select Voices in the USER drive.

• For each Multi Pad, you cannot change the Voice.

• When a GM Song is selected, only a Drum Kit Voice can be selected for channel 10 (in the SONG CH9-16 page).

NOTE For a Style or Song channel, calling up a rhythm/percussion Voice (Drum Kit, etc.) will replace the channel settings

with those for the new Voice. In such a case, the original settings may not be restored even if you re-select the original

Voice. To restore the original sound, select the same Style or Song again without carrying out the Save operation.

PANPOT Determines the stereo position of the selected part (channel).

VOLUME Determines the volume of each part or channel, giving you fine control over the bal-

ance of all the parts.

Editing FILTER Parameters

HARMONIC

CONTENT

Allows you to adjust the Resonance (page 14) for each part.

BRIGHTNESS Determines the brightness of the sound for each part by adjusting the Cutoff Fre-

quency (page 14).