manual

PSR-S670 Reference Manual 87

Connections

Bass Note Settings for Style Playback via MIDI Receive

The explanations here apply to the BASS page in step 4 on page 82. These settings let you determine the bass

note for Style playback, based on the note messages received via MIDI. The note on/off messages received at

the channel(s) set to “ON” are recognized as the bass note of the chord of Style playback. The bass note will

be detected regardless of the [ACMP] or split point settings. When several channels are simultaneously set to

“ON,” the bass note is detected from merged MIDI data received over the channels.

1 Use the Cursor buttons [][] to to select the channel.

2 Use the [1 ]–[8 ] button to set the desired channel to ON or OFF.

You can also set all channels to OFF by pressing the [-/NO] and the [+/YES] buttons simultaneously.

Chord Type Settings for Style Playback via MIDI Receive

The explanations here apply to the CHORD DETECT page in step 4 on page 82. This page lets you select the

MIDI channels over which the MIDI data from the external device will be used to detect the Chord Type for

Style playback. The note on/off messages received at the channel(s) set to “ON” are recognized as the notes

for detecting chords in Style playback. The chords to be detected depend on the fingering type. The chord

types will be detected regardless of the [ACMP] or split point settings. When several channels are

simultaneously set to “ON,” the chord type is detected from merged MIDI data received over the channels.

The operation procedure is basically the same as that of the BASS display above.

The dots corresponding to each channel (1–16)

flash briefly whenever any data is received on the

channel(s).

NOTE If “WLAN” is shown, this instrument can handle

MIDI messages received via the USB wireless LAN

adaptor connected to the [USB TO DEVICE] termi-

nal. When “WLAN” is not shown although the USB

wireless LAN adaptor is connected, turn the instru-

ment off then on again.