User Manual

10 0 PSR-S950/S750 Reference Manual

Mixing Console

Editing and Saving Your Original Master EQ Type

1 Press the [F] (EDIT) button in the EQ Page.

The MASTER EQ EDIT display is called up.

2 Use the [B]/[C] buttons to select a preset EQ type.

The set parameters of the selected EQ type are automatically shown at the bottom of the display.

3 Use the [3 ]–[7 ] buttons to boost or cut each of the five bands.

Use the [8 ] buttons to boost or cut all the five bands at the same time.

4 If desired, adjust the Q (bandwidth) and the FREQ (center frequency) of the band

selected in step 3.

To adjust the bandwidth (also called “Shape” or “Q”), use the [1 ] buttons. The higher the value of Q,

the narrower the band width.

To adjust the FREQ (center frequency), use the [2 ] buttons. The available FREQ range is different for

each band.

5 Press the [H] or [I] (STORE 1 or 2) button to execute the Store operation.

In the Naming display called up via this operation, assign the name then press the [8 ] (OK) button to

store your settings as a User Master EQ Type, which can be called up via the [B]/[C] buttons.