User Manual

PSR-S950/S750 Reference Manual 25
2
Styles
The key which divides the keyboard into two or three sections is referred to as “Split Point.” There are two
types of Split Point: “Split Point (L)” and “Split Point (S).” The “Split Point (L)” divides the keyboard into
the left-hand and right-hand sections while the “Split Point (S)” divides the keyboard into chord and melody
sections.
1 Call up the operation display.
[FUNCTION]  [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING  TAB [E][F] SPLIT
POINT
2 Set the Split Point.
Split Point Settings
[F] Split Point (S+L) Sets the Split Point (S) and Split Point (L) to the same note. Press the [F]
button and rotate the [DATA ENTRY] dial. You can also specify the Split
Point directly from the keyboard by pressing the desired key on the key-
board while holding the [F] button.
[G] Split Point (S) Sets each Split Point. Press one of the desired buttons and rotate the
[DATA ENTRY] dial. You can also specify the Split Point directly from
the keyboard by pressing the desired key on the keyboard while holding
the [G] or [H] button.
NOTE Split Point (L) cannot be set lower than Split Point (S).
[H] Split Point (L)
[1 ]/
[2 ]
STYLE You can specify each Split Point by note name. “STYLE” indicates Split
Point (S) and “LEFT” indicates Split Point (L).
[3 ]/
[4 ]
LEFT
Split Point (S)
Chord section
Right-hand section
(RIGHT 1 and 2 Voices)
Split Point (L)
Left-hand
section
(LEFT Voice)
Split Point (S+L)
Chord + Left-
hand (LEFT
Voice) section
Right-hand section
(RIGHT 1 and 2 Voices)