User Manual

34 PSR-S950/S750 Reference Manual

Styles

NOTE Intro 4 and Ending 4 can be selected on the display then created as your original Style although they are not available on the panel.

3 Replace the Source Pattern of the specific channel with that of another Style.

3-1 Select the desired channel to be replaced via the [A]–[D] and [F]–[I] buttons.

3-2 Press the same button of the selected channel to call up the Style Selection display.

3-3 Select the desired Style, then press the [EXIT] button to return to the original display.

3-4 Select the Section and Channel of the selected Style via the [2 ]–[5 ] buttons.

3-5 Confirm the sound with the newly assigned Source Pattern via the [6 ]–[7 ] buttons.

For details, see “Playing the Style During Style Assembly” below.

4 As desired, execute the same operations for another channel.

Playing the Style During Style Assembly

While you are assembling a Style, you can play back the Style and select the method of playback. Use the

[6 ]/[7 ] (PLAY TYPE) buttons in the Style Assembly display to select the playback method.

•SOLO

Plays back the selected channel in the ASSEMBLY Page. Any channels set to REC in the REC

CHANNEL display on the BASIC Page are played back simultaneously.

•ON

Plays back the selected channel in the ASSEMBLY Page. Any channels set to other than OFF in the

REC CHANNEL display on the BASIC Page are played back simultaneously.

•OFF

Mutes the selected channel in the ASSEMBLY Page.

3-5

3-1,

3-2

3-4

3-3

[A]–[D],

[F]–[I]

buttons