User Manual

PSR-S950/S750 Reference Manual 79
7
Registration Memory
6 Use the [E] (SEQUENCE END) button to determine how Registration Sequence
behaves when reaching the end of the sequence.
• STOP Pressing the TAB [F] button or the “advance” pedal has no effect. The sequence is
“stopped.”
• TOP The sequence starts again at the beginning.
• NEXT BANK The sequence automatically moves to the beginning of the next Registration Memory Bank
in the same folder.
7 Press the [F] (REGISTRATION SEQUENCE ENABLE) button to turn the Registration
Sequence function on.
8 Press the [EXIT] button to exit from the operation display.
After the confirmation message appears, press the [G] (YES) button to store the Registration Sequence
program temporarily.
9 Press the REGIST BANK [+] and [-] buttons simultaneously to call up the
REGISTRATION BANK display, then press the [6 ] (Save) button to save the current
Registration Bank.
This operation is necessary because the Registration Sequence program can be saved to a Registration
Bank.
NOTICE
For future recall, make sure to execute the Save operation. Failing to do so results in the loss of the Registration Sequence program.
[1 ]–
[4 ]
CURSOR Moves the cursor.
[5 ] REPLACE Replaces the number at the cursor position with the currently selected Registra-
tion Memory number.
[6 ] INSERT Inserts the number of the currently selected Registration Memory number to the
cursor position.
[7 ] DELETE Deletes the number at the cursor position.
[8 ] CLEAR Deletes all numbers in the sequence.