User Manual

PSR-S950/S750 Reference Manual 85
8
Microphone
You can set which part controls the Vocal Harmony regardless of the current Vocal Harmony Type.
1 Call up the Vocal Harmony Type Selection display.
[MIC SETTING/VOCAL HARMONY]  [D]/[E] TYPE SELECT
NOTE Check that the microphone is properly connected (Owner’s Manual, chapter 8) and the settings (Reference Manual, page 82) are adjusted correctly before
setting the Vocal Harmony Control parameters here.
2 Press the [8 ] (SETUP) button to call up the Setup display, then set the value by
using the [2 ]–[5 ] and [7 ] buttons.
For information on each parameter, see page 86.
3 After you finish setting the value, press the [EXIT] button to close the Setup display.
Setting up the Vocal Harmony Control Parameters