User Manual

Creating Your Own Original Voices
13
4. Configure the Common settings, which apply to all Elements or Drum Keys, as
required.
Refer to Configuring Common Settings (below) for more details.
5. Edit the Elements or Drum Keys to create your own original Voice.
For details, refer to either Creating a Normal Voice (page 17) or Creating a Drum Voice (page 21) as appropriate.
6. Listen to the Voice you have created, and if necessary, repeat Step 4 and Step 5 to
edit further.
7. Click the Save button y to save the edited Voice.
This completes the procedure for creating an original Voice.
Configuring Common Settings
This section describes in detail the procedure for Step 4 above. To start, click the Common button on the Voice Editor window.
Then, in the window displayed, make the required Common settings (below) for all Elements or Drum Keys.
 General
* Mono/Poly and Portamento Time are not available for Drum Keys.
Volume Adjusts the volume of the current edited Voice.
Touch Sense Sets the sensitivity to input velocities when the Voice is being played using a keyboard. You
can make adjustments by dragging the Offset and Depth points within the graph.
Offset: Determines the velocity sensitivity, or how much the level of the Voice changes in
response to your playing strength (velocity).
Depth: Determines the amount by which received velocities are adjusted for the actual veloc-
ity effect.
Right Octave
Transposes the pitch in units of one octave when the Voice is used for the instrument’s right part.
Left Octave Transposes the pitch in units of one octave when the Voice is used for the instrument’s left part.
Mono/Poly * Determines whether the edited Voice is played monophonically or polyphonically.
Portamento Turns the Portamento function on or off.
Portamento Time * Sets the portamento time (pitch transition time) when the edited Voice is set to Mono above.
NOTE
The Portamento Time determines the pitch transition time. Portamento is a function that creates a
smooth transition in pitch from the first note played on the keyboard to the next.
Input Velocity
Output Velocity
Depth
Offset
64
64
96
127
32 0
0
127