User Manual

Smart Device Connection Manual for iPhone/iPad (iPhone/iPad Connection Manual)
13
 Connection G–H: Connecting Directly via the Wireless MIDI Adaptor
UD-BT01 or MD-BT01
1
Make sure that the power to the connected musical instrument is turned off.
Quit any open app on your iPhone/iPad.
2 Connect the Wireless MIDI Adaptor to USB TO HOST (Type B) or MIDI terminal of the
instrument.
For the proper order, carefully follow the indicated instruction steps for each connection type on page 7.
3 Turn on the instrument.
The lamp of the Wireless MIDI Adaptor flashes.
4 Turn on “Bluetooth” of your iPhone/iPad by tapping Setting  Bluetooth.
5 Start the Bluetooth compatible app, and then make the appropriate wireless connection
settings.
If the wireless connection is successful, the lamp on the Wireless MIDI Adaptor lights continuously.
6 The connection procedures are completed at step 5. Use the app on your iPhone/iPad to
communicate with your instrument.
NOTE Some apps need appropriate settings to communicate with the instrument. For details, refer to the relevant app
manuals.
Required devices
• When connecting via MD-BT01
Wireless MIDI adaptor MD-BT01
• When connecting via UD-BT01
Wireless MIDI adaptor UD-BT01
USB cable (Type A plug – Type B plug)
USB AC adaptor