User Manual

PSR-S970/S770 Reference Manual 127
11
Other Functions
2 Metronome
3 Tap
This allows you to set the percussion sound and the velocity which sounds when the [TAP TEMPO] button
is tapped.
4 Auto Power Off
For details, refer to “Setting Up” in the Owner’s Manual.
CONFIG 2
1 Speaker / Display Content
[2 ] VOLUME Determines the volume of the metronome sound.
[3 ]–
[5 ]
SOUND Determines whether a bell accent is sounded or not at the first beat of each
measure.
[6 ]/
[7 ]
TIME SIGNA-
TURE
Determines the time signature of the metronome sound.
[2 ]–
[4 ]
PERCUSSION Selects the percussion sound.
[5 ]/
[6 ]
VELOCITY Sets the velocity.
(PSR-S970)
[3 ]/
[4 ]
(PSR-S770)
[4 ]/
[5 ]
SPEAKER Determines whether or not the sound is output from the speaker of this
instrument.
HEADPHONE SW: Speaker sounds normally, but is cut off when head-
phones are connected to the [PHONES] jack.
ON: Speaker sound is always on, even if headphones are connected.
OFF: Speaker sound is off. You can only hear the instrument sound via
the headphones or an external device connected to the AUX OUT
jacks.
[5 ]/
[6 ]
DISPLAY OUT
(PSR-S970)
Selects display contents for the external monitor. For details, refer to the
Owner’s Manual, chapter 10.
Use the [A]/[B] buttons to
select the desired parameter.