User Manual

66 PSR-S970/S770 Reference Manual

Songs

5 Press the [8 ] (APPLY) button to record the data.

6 Press the [I] (SAVE) button to carry out the Save operation.

For details, refer to “Basic Operations” in the Owner’s Manual.

NOTICE

The edited Song data will be lost if you select another Song or turn off the power to the instrument without carrying out the Save opera-

tion.

Re-recording a Specific Section—Punch In/Out

When re-recording a specific section of an already-recorded Song, use the Punch IN/OUT function. In this

method, only the data between the Punch In point and the Punch Out point is overwritten with the newly

recorded data. Keep in mind that the notes before and after the Punch In/Out points are not recorded over,

although you will hear them play back normally to guide you in the Punch In/Out timing.

NOTE The Style Retrigger function (page 13) cannot be used when recording over existing data (overdubbing).

1 Select the desired Song for re-recording.

2 Call up the operation display.

[FUNCTION]  TAB [F] MENU 2  [B] SONG CREATOR  TAB [E] REC MODE

3 Determine the settings for recording.

[4 ]/

[5 ]

MARK ON Add or remove a checkmark to the selected item. Checked items are

recorded to the Song.

[4 ]/

[5 ]

MARK OFF

[1 ]–

[3 ]

REC START

(Punch In)

Determines the Punch In timing.

NORMAL: Overwrite recording starts when the Song playback is started

via the SONG [F/

K] (PLAY/PAUSE) button or when you play the

keyboard in the Synchro Standby mode.

FIRST KEY ON: The Song plays back normally, then starts overwrite

recording as soon as you play the keyboard.

PUNCH IN AT: The Song plays back normally up to the beginning of

the indicated Punch In measure, then starts overwrite recording at that

point. You can set the Punch In measure by pressing the [3 ] but-

ton.