User Manual

PSR-SX600 Reference Manual 57

Songs

2 Quick Start/Phrase Mark Repeat

 Setting page

1 Part Channel/Guide Mode

2 Lyrics Language

[3 ]/

[4 ]

Quick Start On some commercially available Song data, certain settings related to the Song

(such as Voice selection, volume, etc.) are recorded to the first measure, before the

actual note data. When Quick Start is set to “On,” the instrument reads all initial

non-note data of the Song at the highest possible speed, then automatically slows

down to the appropriate tempo at the first note. This allows you to start playback

as quickly as possible, with a minimum pause for reading of data.

[5 ]/

[6 ]

Phrase Mark

Repeat

This parameter is available only when the current Song contains Phrase Marks,

which specify certain locations (of several measures each) in the Song. When this

is set to On, the section corresponding to the Phrase Mark (specified via the

SONG CONTROL [G] (REW) and [H] (FF) buttons) is played back repeat-

edly. Note that this parameter can be set only when the Song playback is stopped.

[2 ] Left These parameters determine which MIDI channel in the Song data is assigned to

the left- or right-hand part of the Guide function and the Song Score function.

[3 ] Right

[4 ] Auto Ch Set When set to “On,” this automatically sets the proper MIDI channels for the Right-

and Left hand parts pre-programmed in the commercially available Song data.

Normally, this should be set to “On.”

[6 ]/

[7 ]

Guide Mode See page 58.

[4 ]/

[5 ]

Lyrics Language Determines the language displayed in the Lyrics display.

Auto: When the language is specified in the Song data, the lyrics are displayed

accordingly.

International: Handles the displayed lyrics as a western language.

Japanese: Handles the displayed lyrics as Japanese.

Use the Cursor

buttons [][].